Bay & Bow Windows

Bay & Bow Windows in Hollywood, FL | TruePane Windows & Doors

Bay and bow windows are the architectural upgrade that changes how a room feels from the inside out. Instead of a flat pane against the wall, you get a projecting glass structure that reaches outward, adding usable interior square footage and wrapping the space in daylight. For homeowners in Hollywood, FL, these windows also have to work as hard as any other opening in the house during a storm, which is why TruePane Windows & Doors builds them in laminated impact glass and frames them to the same standards we use on every hurricane-rated product we install. Whether you’re renovating a lakeside mid-century home off North Lake or updating a Mediterranean-style house in Emerald Hills, we’ll help you configure a bay or bow window that fits the architecture and the wind zone. Call (863) 334-2933 to talk through your opening.

Call (863) 334-2933

Product Overview - Bay & Bow Windows

Bay windows are traditionally built from three panels: a wide fixed center unit flanked by two angled operable or fixed side units, usually projecting at 30 to 45 degrees from the wall. Bow windows use four, five, or even six panels set at shallower angles to create a gentle curve that wraps around the corner of a room. Both profiles extend beyond the exterior wall line, creating a deep sill area that works as a reading nook, display shelf, or breakfast alcove. The projecting structure is supported by a structural seat board, head board, and exterior support system that carries the weight of the glass and frame through the rough opening.

In South Florida, that projection creates additional considerations. The projection catches wind from more angles than a flush-mount window, which means the frame, the anchoring method, and the glass package all need to be engineered as a system, not selected piecemeal. TruePane Windows & Doors has installed projecting bay and bow configurations across Hollywood and the broader Broward County market for years, and we understand what coastal wind exposure does to these openings. The result is a product that reads like premium architectural millwork from inside your living room and performs like a hurricane-rated opening when it matters.

We configure these windows through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, which means we’re not locked into one manufacturer’s size chart or one frame material. If your opening calls for aluminum, we’ll frame it in aluminum. If vinyl makes more sense for the project, we’ll go that route. The glass package is always laminated impact glass with a PVB interlayer, with optional Low-E or tinted coatings layered in for energy control. Every unit we order is custom fabricated to the measured opening, so you’re not paying for a stock size that’s close enough. You’re getting a window built for the exact dimensions of your home in Hollywood.

Technical Specifications

Here’s what goes into every bay and bow configuration we specify for Hollywood projects. These are the building blocks, not a fixed menu. We’ll mix and match based on the elevation, the wind zone, and the look you’re after.

• Frame materials: Extruded aluminum or multi-chamber vinyl depending on the manufacturer line and the structural demands of the opening.
• Maximum size: Custom fabricated to the opening. There’s no stock bay or bow size in our catalog. We measure, we configure, we order to spec.
• Glass options: Laminated impact glass with PVB interlayer (standard on every impact unit), Low-E insulated glass, tinted glass, or clear laminated glass.
• Color and finish options: White, almond, bronze, black, tan. Interior and exterior color choices vary by manufacturer line and product series.
• Sill options: Standard sill in a smooth raised profile, or a seat/shelf sill cut with a deeper projection for a true window-seat surface.
• Design pressure: Matched to your wind zone, up to +/-100. We never spec higher than the elevation requires, because the window doesn’t need to be overbuilt, it needs to be right.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration, verified on your written quote.

Hurricane & Compliance Performance

Bay and bow windows are only as storm-capable as the weakest connection point in the entire system. That’s why the compliance documentation, the glass package, the frame engineering, and the installation method all have to align. Here is the framework we work within for every Hollywood installation.

Laminated Impact Glass - The inner layer of every impact bay and bow window we install is laminated glass: two panes bonded by a PVB interlayer. Under impact, the glass may crack but the interlayer holds the broken pieces in place, keeping the building envelope sealed. No flying shards, no opening blown in.

Miami-Dade NOA & Florida Product Approval - Each bay and bow configuration carries its own Notice of Acceptance or Florida Product Approval documentation, issued per configuration. The number on one unit doesn’t necessarily apply to a different size or glass package. We verify the correct documentation for your exact configuration before we write your quote, not after you sign.

FBC/HVHZ Compliance - Every unit we install in Hollywood is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is, by design, the strictest windborne-debris region standard in the state, and it applies to nearly all of Broward County. A window that merely passes commercial code in another state doesn’t get wet in Hollywood without HVHZ product approval behind it.

TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under a specific protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. That’s the testing gauntlet the product you’re buying has passed, in the exact configuration we present for your permit submittal.

Design Pressure for Your Wind Zone - We match design pressures to your wind zone, up to +/-100, and never higher. A DP rating is a structural requirement, not a marketing metric. Overspecifying adds weight and cost. Underspecifying is what our grandmothers would call setting money on fire. We calculate from the actual elevation, opening size, and exposure.

Energy Performance Options - Low-E and insulated glass packages are available on bay and bow configurations for homeowners who want the hurricane protection plus a barrier against South Florida heat gain. Tinted glass runs cooler at the sill on western-facing elevations, which matters when that seat/shelf sill turns into the cat’s favorite afternoon spot.

Color & Glass Options

Color and glass selection for a bay or bow window in Hollywood isn’t just an aesthetic call. It’s also a performance call, because we’re building a projecting glass structure that faces the sun and the wind at angles a flat window never has to deal with.

For finish colors, white and almond remain the most common choices across Hollywood’s older single-family neighborhoods and the 1950s-60s ranch-style homes in Bougainvilla and Hollywood Hills. Bronze and black frames read as modern and disappear against dark-tinted glazing on contemporary remodels in Lakeside or along the Intracoastal. Tan works well on Mediterranean elevations where a stark white frame would fight the warm stucco tones. Interior and exterior color availability varies by manufacturer and series, so we’ll show you the combinations that are actually available in the laminated impact glass package you need, not a catalog swatch that doesn’t exist in the paperwork.

On the glass side, clear laminated impact glass is the honest, simple choice when the priority is structural protection and sightlines. Low-E insulated glass adds an energy-control layer that’s worth considering in west-facing bays, where the afternoon sun in Hollywood comes hard through the projection. Tinted glass cuts glare and heat gain at the source, especially on bays that capture direct exposure from late morning to sunset.

Installation by TruePane Windows & Doors in Hollywood

Here’s the thing about bay and bow windows that most product pages won’t tell you: the product documentation is meaningless if the installation is sloppy. A NOA-rated bay window anchors to the structure through the seat board and head board, and the perimeter seal has to hold against wind-driven rain from every direction. You can pull the NOA for the exact window we’re quoting, but the window only performs to that rating if the crew installing it knows what they’re doing at the rough opening.

Our process starts with a pre-install inspection of the opening. We’re checking the rough opening for square, and we’re checking the condition of the framing behind the drywall, because a bay window carries more structural load than a standard window and a compromised header doesn’t get better after you hang three panels off it. From there, we set the unit level, plumb, and square, which on a projecting window is not a suggestion. A bay window installed even slightly out of level will bind at the vents, leak at the mull joints, and never close right.

The perimeter gets sealed with AAMA 812 low-expansion foam sealant, not a bead of caulk and a hope. We follow AAMA 2400 and 2410 installation practice, which is the standard that governs how impact-rated windows and doors are flashed, anchored, and sealed. After water testing, we clean the opening and walk you through the finished product, including the operation of every vent and the sill detail.

For Hollywood specifically, we’re always aware of permitting. Most of our installations pull permits through the city of Hollywood Building Department, and the permit package includes the NOA or FL Product Approval documentation for every window on the order. Coastal exposure elevations, wind zone calculations, and the placement of the opening on the wall all come into the permit review. We prepare that documentation for our clients as part of the project, because a failed review costs time, and time in a remodeling project always costs money.

If a contractor tells you that any window “will pass” without verifying the NOA for your specific size and configuration, that’s your cue to call someone else. We’re at (863) 334-2933.

Frequently Asked Questions - Bay & Bow Windows

Get a Quote - Bay & Bow Windows in Hollywood

We’ll measure your opening, walk you through the frame, glass, and finish combinations that work for your elevation and your wind zone, and write you a quote with the exact configuration, the NOA documentation, and the installation scope. No pressure, no sizing theater. Call TruePane Windows & Doors at (863) 334-2933 to schedule your free on-site measurement in Hollywood.

Written by the team at TruePane Windows & Doors, serving Hollywood, FL for over a decade as a hurricane-impact window and door specialist.