Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Trusted Window Installation for Hollywood Homeowners
Window Installation in Hollywood typically costs between $450 and $1,400 per window for standard vinyl or aluminum units, with impact-rated windows running $1,200 to $3,000 each depending on size and frame material. Most single-room projects finish in one day once the windows arrive. TruePane Windows & Doors has handled Hollywood installs for homeowners north of Hollywood Boulevard, in Emerald Hills, and down toward the Intracoastal, and the work comes with both manufacturer warranty layers registered in writing before our truck leaves the driveway.

Dale Kessler founded this company in 2008 on a rule that still hangs on the shop whiteboard: if the pane is not true, the job is not done. That means every opening gets measured twice, every unit gets checked for square before fasteners go in, and every homeowner gets a straight answer on what their windows will and will not do. Call (863) 334-2933 and a live person answers. Not a call center. Not a voicemail tree. A person who knows windows.
What Our Window Installation Service Includes
Every window we set in Hollywood gets the same treatment from our home office to the job site: a measured opening, a shimmed and squared frame, insulated gaps, and flashing that sheds water the way it should. Here is what each window type involves.
Casement Windows
Casement windows hinge at the side and crank outward, which makes them the tightest-sealing operable window you can put in a coastal home. When the wind presses against the sash, the seal gets tighter instead of looser. TruePane sets casements with a full perimeter check on the weatherstripping and adjusts the crank hardware so the sash closes flush every time. In Hollywood’s salt air, we use stainless or coated hardware on every casement we install.

Awning Windows
Awning windows hinge at the top and open outward from the bottom, so they shed rain while still letting air move. They work well over kitchen sinks and in bathrooms where you want ventilation without giving up privacy. We install them with a slight outward pitch so water runs off the sash instead of pooling at the sill, which is a small detail that prevents a lot of Hollywood humidity problems down the line.

Fixed & Picture Windows
Fixed windows do not open, and that is exactly why they seal so well. They give you the biggest uninterrupted view and the best thermal performance of any window style. TruePane installs fixed and picture windows in Hollywood living rooms, stairwells, and anywhere a clear sightline matters, and we set them in a way that leaves zero pressure on the glass from the frame, so the seal stays intact for the long haul.

Single & Double Hung
Single hung windows have one movable sash; double hung windows let both sashes slide, which improves airflow and makes cleaning easier on a second story. In older Hollywood homes, these are the most common style we replace, and most of them have sashes that bind because the frame settled out of square years ago. We correct the rough opening before the new unit goes in, so the sash glides on day one and keeps gliding ten years later.

Sliding Windows
Sliding windows move horizontally on a track, and in Florida they earn their keep in wide openings where you want ventilation without a sash sticking into the room. The track is the weak point, especially with blown sand from the beach and salt in the air. We install sliders with properly pitched tracks and clean drainage channels, and we test every roller before we call the job done.

Bay & Bow Windows
Bay and bow windows project outward from the wall to create a seating nook or simply more light in a room. They are structural work, not just window work, because the projection changes how the wall carries load. TruePane frames bay and bow installations to carry weight into the floor system properly, and we flash the underside so driving Hollywood rain cannot find its way into the wall cavity.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Installation
TruePane is an authorized installer for more than a dozen manufacturer lines, and we have set enough Marvin units in Hollywood to know their joinery and their hardware by touch. Marvin windows carry some of the longest structural warranties in the business when they are installed to spec, and we register every layer of that warranty in writing before we leave the job. Homeowners who choose Marvin usually want wood interiors with aluminum exterior cladding, and we walk through what that means for upkeep in a salt-air market.
We also install Milgard and Jeld-Wen lines regularly, and we quote them side by side on paper so you see the price difference and the warranty difference before you commit. Milgard’s vinyl lines hold up well in direct sun, and Jeld-Wen’s awning and casement hardware is straightforward to service years down the road. Our relationship with Hollywood window installation customers does not end when the caulk cures. If your window comes from Simonton, Andersen, Pella, PGT, or CGI, we service those too. The brand matters less than the install, and the install is what we control.

Signs You Need Window Installation Right Now
- You feel a draft standing three feet from a closed window. That means the seal between the sash and frame has failed or the frame has warped. In Hollywood’s summer, that is cooled air leaving your house all day, every day. A new properly sealed unit stops it.
- The glass fogs between the panes. A fogged seal means the insulating gas has escaped and moisture has gotten inside the glass unit. No repair fixes that permanently. The window needs replacement, and a fogged unit is doing almost nothing for your electric bill.
- The sash sticks, binds, or will not stay open. Older Hollywood homes settle, and a window that once worked fine can bind against a frame that is no longer square. Forcing it wears out the hardware and eventually breaks something. Installation of a new unit in a corrected opening solves it for good.
- You can see daylight around the frame edges. That gap is an air leak, a moisture entry point, and a sign the original install was never done right. In hurricane country, it is also a structural concern. If you can see light, water can find the same path.
- The frame is soft, peeling, or showing rot. Wood frames in Hollywood break down fast in humidity, and a soft frame cannot hold glass or hardware securely. Replacing the window before the rot spreads into the surrounding wall is always a smaller job than waiting.
Our Window Installation Process - Step by Step
- 1
Measure, twice. Every opening gets measured at multiple points because old Hollywood homes rarely have square rough openings. We check frame dimensions, sill pitch, and wall depth before we order anything. The order is confirmed against those measurements, in writing.
- 2
Order and register. We order from the manufacturer line you chose and register both warranty layers, with durations stated, before the installation date. You get a copy. If anything is off on delivery day, we catch it before old windows come out.
- 3
Remove and inspect. The old unit comes out carefully, and we inspect the rough opening for rot, termite damage, or moisture. If the opening needs repair, we tell you what we found and what it costs before any new work starts. No surprises on the bill.
- 4
Set, shim, and seal. The new window goes in level and square, shimmed so the frame carries load evenly. We insulate the gaps, flash the exterior to shed water, and tool the sealant clean. Every sash, crank, and lock gets tested in front of you.
- 5
The Keystone Standard checkout. Before the truck leaves, we walk the job with you, confirm the warranty registration is in your hand, and leave the work area cleaned up. If something is not done right, the Done Right Promise means we make it right. No paperwork fights. No arguing.
How Much Does Window Installation Cost in Hollywood?
A standard vinyl single hung in Hollywood runs $450 to $850 installed, while a mid-range casement or awning falls between $700 and $1,200, making TruePane a source for Affordable Window Installation in Hollywood, FL. Bay and bow installations start around $2,500 and climb with size and structural work. Impact-rated windows, which many Hollywood homeowners consider for storm protection and insurance discounts, typically run $1,200 to $3,000 per opening depending on frame material and glass package. These are installed prices, not window-only prices you have to multiply later.
What moves the price: frame material, glass package, impact rating, opening size, access difficulty, and whether the rough opening needs correction. Two-story work and stucco repair around the opening also add cost. The way to avoid overpaying is to get a written line-item quote that separates the window from the labor from the flashing and trim, so you can compare bids honestly. Our estimates are free, and a live person answers at (863) 334-2933 to schedule one. We do not quote over the phone, because an honest number requires seeing the opening.
Window Installation Near Hollywood - Our Service Area
TruePane installs windows throughout Hollywood and the surrounding coastal corridor, including Dania Beach, Aventura, Hallandale Beach, Pembroke Park, and Sunny Isles Beach. We also work regularly in West Park, Ives Estates, Ojus, North Miami Beach, Miami Gardens, and Cooper City. Homeowners in these areas call one number, speak to a person, and get a scheduled appointment. We show up when we say we will.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Installation in Hollywood
Window installation is the process of removing an old window, preparing the rough opening, and setting a new window so it is level, square, sealed, and flashed properly. It includes insulation around the frame, exterior waterproofing, interior trim work where needed, and a final check of every sash and lock. Done right, an installed window should last decades without drafts, leaks, or binding. Done wrong, it fails within a few years.
Most single-room window installations finish in one day, including removal, cleanup, and the final walkthrough. Whole-house replacements typically take two to four days depending on how many openings and what condition the rough openings are in. Bay and bow work takes longer because of the structural framing involved. We give you a schedule in writing before you commit, and we stick to it.
For homeowners seeking the Best Window Installation in Hollywood, FL, pricing typically ranges from $450 to $1,400 per window for standard units and $1,200 to $3,000 for impact-rated windows, installed. Exact pricing depends on window style, size, frame material, glass package, and the condition of the existing opening. Call (863) 334-2933 for a free written estimate with line items.
Yes. TruePane is an authorized installer for, and we register both manufacturer warranty layers in writing for every install. We also install and service Simonton, Andersen, Pella, PGT, and CGI lines. If you have a less common brand, bring us the details and we will tell you honestly whether we can service it.
In most cases window installation is planned work, not emergency work, because the window is ordered to your opening measurements. But if a window is broken, leaking, or leaving your home unsecured, call us right away. A live person answers 24 hours a day, 7 days a week, and we can board or temporarily secure the opening until your new window arrives. Do not leave a breached window open to Hollywood weather or uninvited entry.
Every TruePane installation carries the Done Right Promise: if the work is not done right, we make it right, with no paperwork fights and no fine print. On top of that, The Keystone Standard means both manufacturer warranty layers are registered in writing, with durations stated, before our truck leaves your driveway. You leave the job with the paperwork in your hand, not a promise to send it later.
Clear a path to each window on the inside and outside, move furniture at least three feet back from the opening, and take down any window treatments before we arrive. We protect floors and furniture with drop cloths, but removing delicate items is a good idea. If you have an alarm system sensor on a window, let us know before the appointment so we can work around it. We handle the rest.
Schedule Your Window Installation Service in Hollywood Today
If your windows are drafty, fogged, binding, or just past their years, call (863) 334-2933 and talk to a person who knows Hollywood windows. We will schedule a free estimate, measure twice, and give you a written quote with no surprise line items. The work carries our Done Right Promise and The Keystone Standard, in writing. If the pane is not true, the job is not done, and we stand behind that.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hollywood since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After