PGT Sliding Glass & Patio Doors Nationwide | TruePane Windows & Doors

PGT Sliding Glass & Patio Doors in Hollywood: What to Know First

PGT sliding glass and patio door repair in Hollywood typically runs between $180 and $650 depending on whether we’re replacing rollers, re-aligning a panel, or swapping out a worn track. Most PGT service calls are completed in a single visit, and we give you a written line-item quote before any work begins so the bill doesn’t move once the truck is in your driveway.

Call (863) 334-2933

If you own a PGT slider or patio door that’s started dragging, binding, or leaking air, this page tells you what’s actually going on inside the frame and what it takes to fix it right. Call (863) 334-2933 and a live person answers, 24/7. We’re an independent PGT service provider, not a manufacturer affiliate. That means we work for you, not a warranty department.

Key takeaways:

• Most PGT slider repairs cost $180-$650 and are handled same-day in Hollywood
• We register both manufacturer warranty layers in writing before we leave your driveway
• Free estimates, no surprise line items, and a Done Right Promise on every job

How PGT Products Fail - and How We Fix Them

PGT makes a solid door. We’ve worked on enough of them in Hollywood to know exactly where they wear, and it’s rarely the glass. Here are the five most common failures we see on PGT sliders and patio doors in this part of Broward County.

• Roller collapse on PGT 5500 and 7700 series sliders. The original nylon rollers on these lines are decent, but after eight to ten years of Florida humidity and salt air they flatten on one side. The door still opens, but it grinds and leaves a gray dust trail on the track. We replace the rollers with a stainless-steel bearing assembly that’s rated for coastal exposure. On 5500 series doors this usually runs $220-$310 per panel, installed.
• Sticking or binding panels on PGT SGD860 sliders. This is the big three-panel door you see on a lot of Hollywood ranch houses built in the 1990s. The issue is rarely the panel itself. It’s the aluminum track: over time the bedding settles and the track loses its level by a quarter inch or more. The door wants to close, but physics says no. We pull the panel, re-shim the track, and reset it square. If the track is too far gone, we quote a replacement track rather than patching it.
• Failed interlock weatherstripping on PGT WinGuard patio doors. WinGuard is PGT’s impact-rated line, and the interlock where the two panels meet has a vinyl weatherstrip that bakes in direct sun. Once it hardens and cracks, you get air infiltration and a whistle when the wind comes off the Atlantic. We replace the interlock seal with an OEM-spec profile, not a generic foam strip, because the impact rating depends on that seal doing its job during a storm event.
• Fogged insulated glass on early 2000s PGT Series 200 sliders. If you’re in Hollywood Lakes or Emerald Hills and your PGT slider has moisture between the panes, that’s a failed seal. The desiccant inside the spacer bar is spent. We replace the insulated glass unit rather than the whole door, which preserves the frame and saves you several hundred dollars. We match the glass package so the tint and Low-E coating line up with the rest of your openings.
• Stripped lock hardware on PGT pocket doors. Pocket sliders hide their locking mechanism inside the wall, so when the latch stops catching, most homeowners assume the whole assembly is shot. In most cases it’s a worn striker plate or a locking pin that’s drifted 3/16 of an inch out of alignment. We remove the trim, reset the hardware, and the door locks like it did when PGT shipped it.

Our PGT Sliding Glass & Patio Door Process

Here’s how a PGT service call goes from the moment you phone us to the moment we sweep the sill and leave.

1. 1
   You call, a person answers. We ask what the door is doing, when it started, and which PGT series you have if you know it. We schedule a visit during a window that works for you. We’ll be there when we say.
2. 2
   We measure and diagnose. A background-checked, uniformed technician arrives and inspects the door: rollers, track level, interlock alignment, weatherstripping, and frame squareness. We measure every opening twice before we quote anything.
3. 3
   We quote side by side, on paper. If the repair calls for parts, we show you the OEM option and, where it makes sense, a quality aftermarket option with the trade-offs stated plainly. You decide before any work starts.
4. 4
   We do the work. Most PGT slider repairs are finished in one visit. We carry the common roller sizes, track shims, interlock seals, and locking hardware for PGT 5500, 7700, SGD860, and WinGuard lines on the truck.
5. 5
   We test it in front of you. The door rolls, locks, and seals before we call the job done. If the pane is not true, the job is not done.
6. 6
   We register the warranty. Both manufacturer warranty layers are put in writing, with durations stated, before the truck leaves your driveway. Our Done Right Promise covers the workmanship. No paperwork fights, no arguing.

What PGT Sliding Glass & Patio Doors Cost in Hollywood

Here’s what we typically see for PGT service work in Hollywood. These are line-item ranges, not vague ballparks.

• Roller replacement (per panel): $180-$310 depending on series and whether we’re using OEM or stainless-steel upgrade rollers
• Track re-leveling and panel re-alignment: $250-$450 depending on how far the track has drifted and how many panels are involved
• Interlock weatherstrip replacement: $120-$200 including the OEM-spec seal and labor
• Insulated glass replacement (seal failure): $400-$750 depending on glass package and panel size
• Lock and striker plate repair: $90-$180 for most PGT configurations

What moves the price: the series you have, whether the frame itself is worth saving, and whether the job calls for impact-rated components. If a door is fifteen years old and the frame has corrosion from years of sprinkler overspray, we’ll say so and quote a replacement rather than a patch job. Call (863) 334-2933 for a free estimate. We come out, we measure, and we hand you a written quote with no obligation.

Why Hollywood Homeowners Call TruePane Windows & Doors for PGT Work

TruePane Windows & Doors has been doing this work in South Broward since before PGT became a household name. Dale Kessler grew up in the Liberia neighborhood of Hollywood, where his father spent weekends resealing jalousie frames against whatever the Atlantic decided to throw at them. Dale started TruePane in 2008, but the craft behind it goes back many years. The founding rule still hangs on the shop whiteboard: if the pane is not true, the job is not done.

We carry parts and know the failure patterns for PGT, but we’re also an authorized installer for more than a dozen other lines including CGI, CWS, ES Windows, and ECO Window Systems. That matters when a PGT door is beyond repair and you need honest guidance on what to replace it with, side by side on paper. The Keystone Standard means both warranty layers are registered in writing before we leave. The Done Right Promise means we stand behind the work. A live person answers the phone 24 hours a day, 7 days a week. No voicemail tree, no callback form.

FAQs