CWS Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

CWS Shingle, Tile & Metal Roofing in Hollywood: What to Know First

CWS shingle, tile, and metal roofing in Hollywood is work we take on as an independent CWS service provider, not as a factory-authorized dealer. Most CWS roof repairs in Hollywood run between $450 and $2,800 depending on whether we’re resealing flashing, replacing cracked tile, or pulling a section of failed shingle and re-nailing the underlayment. We quote the job after we’ve been on the roof, not before, and the estimate is free. If you own a CWS roof and something’s leaking, lifting, or looking wrong after a storm, call (863) 334-2933 and a live person answers.

Call (863) 334-2933

How CWS Products Fail - and How We Fix Them

• CWS Presidential Shake composite shingles losing their seal strip along the eave line. We see this all over Hollywood, especially in Driftwood and Emerald Hills. The adhesive strip that holds the shingle tab down bakes out after eight to ten seasons of South Florida sun, and the first good wind peels the tab back. We re-seal with a roofing-grade adhesive rated for the same temperature swing, then check the fasteners on either side so the fix doesn’t hinge on one point.
• CWS flat concrete tile with hairline cracking at the nail holes. Tile roofs in Hollywood take a beating from thermal expansion, and CWS concrete tile is no exception. When the tile is nailed too tight or the batten has rotted, you get stress cracks radiating from the fastener. We pull the damaged tile, inspect the underlayment beneath it, replace any rotted batten, and set the new tile with the fastener torque that leaves room for the roof to move.
• CWS standing seam metal roofing with lap joints loosening at the ridge. The expansion and contraction between Hollywood’s hot afternoons and cooler Gulf-adjacent nights works lap screws loose over time. Homeowners first notice it as a faint rattle in the wind or a stain running down the panel seam. We re-secure the lap, replace the butyl tape if it’s dried out, and re-pitch anything that’s sagged enough to hold water.
• CWS barrel tile that shifts after a hurricane strap was added without re-bedding the tile. This one’s specific to South Broward. A roofer comes out to add hurricane clips, lifts the tile, and sets it back without fresh mortar. Six months later the tile walks an inch left or right and you get the leak. We re-bed with the right mix for barrel profiles and check every tile in the row, because the loose one is rarely alone.
• CWS underlayment delaminating under architectural shingle. On older CWS jobs where the underlayment was a felt product rather than a synthetic, we find delamination where a small leak sat unnoticed. The shingle looks fine from the ground, but underneath the underlayment has separated from the deck. We cut back to solid material, re-nail the deck as needed, and lay the new underlayment before the shingle goes back on. This is the repair that separates a real roofing crew from a sales team.

Our CWS Shingle, Tile & Metal Roofing Process

1. 1
   Call and talk to a person. You call (863) 334-2933, a live person answers, and we book a time that works. No phone tree.
2. 2
   We walk the roof and the attic. We look at the surface and the underside, because the leak on the ceiling and the entry point on the roof are often six feet apart.
3. 3
   We write the estimate on the spot. You see the line items for material and labor before we touch anything. No surprises later.
4. 4
   We make the parts decision with you. Where CWS OEM components are unavailable or backordered, we explain the aftermarket option, name the manufacturer, and get your sign-off before ordering.
5. 5
   We do the repair or replacement. Uniformed, background-checked techs handle the work, with tarps and gutter guards in place before we start stripping anything.
6. 6
   We test and we guarantee. We run water where we can, check the fix from the deck and the attic, and leave you with our Done Right Promise. If it’s not right, we come back. That’s the baseline.

What CWS Shingle, Tile & Metal Roofing Costs in Hollywood

Here’s what we see in Hollywood for CWS roof work:

• Small repair (resealing flashing, replacing a few cracked tiles, re-nailing loose shingles): $450-$900
• Moderate repair (section of underlayment, multiple tiles or shingles, lap joint re-sealing on metal): $900-$1,900
• Larger replacement (a full roof plane or extensive flashing rebuild): $1,900-$2,800, sometimes more if the deck needs work

What moves the price: how much decking has to be replaced, whether the CWS profile is still in production or has to be sourced aftermarket, and how steep or tall the roof is. We don’t give curb-side quotes. The estimate is free and it’s in writing. Call (863) 334-2933.

Why Hollywood Homeowners Call TruePane Windows & Doors for CWS Work

TruePane has been serving local communities since 2008, and Dale Kessler grew up in the Liberia neighborhood of Hollywood, where his father spent weekends resealing jalousie frames against whatever the Atlantic decided to throw at them that season. We’re not a franchise and we’re not a call center. Every job gets the Done Right Promise, meaning if it’s not done right, we make it right with no paperwork and no arguing. The warranty layers get registered in writing before the truck leaves. And when a CWS profile is discontinued or a part’s stuck in distribution, we can often cross-reference what’s already in the home with PGT, CGI, ES Windows, or ECO Window Systems specs, because we install more than a dozen manufacturer lines and we keep the data on file. Measure it right, set it square, and the paperwork takes care of itself.

FAQs