Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Wilton Manors
In Wilton Manors, replacing windows and doors is rarely a style decision. It’s a code and insurance mandate. Much of the original 1950s-1970s CBS ranch stock still carries jalousie or single-pane aluminum sliders that cannot pass Broward County’s High Velocity Hurricane Zone product approvals. If you own one of these homes, you already know the conversation your insurer started. TruePane Windows & Doors handles custom window and door work in Wilton Manors the way it should be handled: compliance first, then craft, then a written warranty you can actually hold us to. Call (863) 334-2933 and a live person answers. That’s Dale Kessler’s rule, and it has been since 2008 of work in South Florida.

Why TruePane Windows & Doors Is Wilton Manors’s Preferred Custom Windows & Doors Company
We work in Wilton Manors neighborhoods the way a local crew should. That means we know a Middle River Terrace canal-front home from a Wilton Drive storefront, and we spec materials accordingly. Homeowners here have watched neighbors replace windows twice because someone installed inland-grade aluminum within a block of brackish water. We don’t make that mistake. Our technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway.
Wilton Manors customers call us because the work gets done right the first visit, and because the Done Right Promise means exactly what it says: if it is not done right, we make it right, with no paperwork fights. Dale Kessler founded this company in 2008 on a simple rule: if the pane is not true, the job is not done. That rule governs every custom install, every storefront, every impact-rated retrofit we put in across Wilton Manors.
Our Custom Windows & Doors Services in Wilton Manors
Custom Shape Windows
Older CBS ranch homes in Wilton Manors often have original jalousie openings that are not rectangular and not standard. Arched jalousies, corner windows, trapezoid vents over a front door. We build Custom Windows & Doors to frame openings precisely, in impact-rated glass that meets Broward County HVHZ product approvals. A custom shape doesn’t exempt you from code. It just means the fabrication has to actually fit the opening, and our shop handles that in-house.

Commercial Storefront Glazing
Wilton Drive has storefronts from the 1960s still running on single-pane aluminum frames. In a hurricane zone, that means a board-up plan every season and an insurance policy that keeps climbing. We replace commercial storefront systems in Wilton Manors with impact-rated glazing and properly anchored frames, coordinated with county product approvals so the final inspection passes without a second trip. If you own retail or restaurant space here, you already know the cost of guessing wrong.

Curtain Wall Systems
For larger residential additions or commercial buildings along the Wilton Drive corridor, curtain wall systems need engineering before fabrication. Wind load calculations are non-negotiable in Broward’s HVHZ, and we work with local engineers who know Wilton Manors conditions. Salt air from the Middle River system shortens the life of standard aluminum mullions, so we spec finishes and hardware that survive this microclimate. We quote these jobs with engineering time listed as a line item, not a surprise.

Architectural Grilles & SDLs
Many Wilton Manors homeowners want the look of divided-light windows without sacrificing impact ratings. Simulated divided lites (SDLs) give you true muntin bars applied to the glass surface, matching the original character of a 1950s ranch while meeting modern wind-debris standards. For custom shape windows especially, SDLs and architectural grilles let you keep period detail on a house that was never built for hurricane glass. We show you samples before we cut anything.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wilton Manors
We install and service more than a dozen manufacturer lines, and for Wilton Manors specifically we lean on PGT, Jeld-Wen, and Simonton for impact-rated product approvals that Broward County accepts without argument. PGT fusion-welded frames with stainless hardware are our default recommendation for any lot within two blocks of the Middle River. Jeld-Wen and Simonton give us solid aluminum and vinyl options for inland CBS homes where corrosion risk is lower but HVHZ compliance is still mandatory. We keep common hardware and replacement sashes in local inventory so Wilton Manors customers are not waiting on a freight truck from Georgia.

Common Custom Windows & Doors Problems We See in Wilton Manors Homes
- Original jalousie windows failing HVHZ wind-debris tests. Even a like-for-like replacement requires full impact-rated glazing and county product approvals. You cannot legally put a non-impact louver back into a residential opening in Wilton Manors.
- Aluminum sliders and thresholds corroding within two blocks of the Middle River. Brackish salt air pits tracks and hardware in five to eight years. Sashes bind, seals fail, and the window stops closing square long before inland Broward homes need replacement.
- Non-impact hollow-core entry doors flagged during insurance reinspections. Many original Wilton Manors ranch homes still have the 1960s builder-grade door. When the insurer sends a reinspector, that door becomes a mandatory upgrade to an impact-rated unit.
- Fogged double-pane glass on newer retrofits. Seal failure shows up as condensation between panes. In Wilton Manors humidity, a failed seal is permanent. Replacement of the insulated glass unit is the fix, and we quote it as a unit price, not a whole-window replacement.
Pricing for Custom Windows & Doors in Wilton Manors, FL
For a standard impact-rated replacement window in a Wilton Manors CBS ranch, expect $900 to $1,800 per opening, installed. Custom shape windows run $1,400 to $2,800 each, depending on the frame profile and whether SDLs or architectural grilles are specified. A full impact-rated entry door replacement typically lands between $2,200 and $4,500. Commercial storefront glazing on Wilton Drive starts around $75 to $150 per square foot for impact-rated systems, with engineering and permit coordination as separate line items. Curtain wall work is quoted per project because the structural requirements vary so widely. These ranges reflect what we actually see in Wilton Manors, not national averages. Call (863) 334-2933 for a written quote. Estimates are free, and the price we quote is the price you pay.
We Also Serve Cities Near Wilton Manors
Our crews work regularly in Hollywood, Dania Beach, Aventura, and Pembroke Park. The permitting and product approval rules shift a little across Broward county lines, but the standard does not. If you live just outside Wilton Manors, we bring the same written quotes, the same background-checked technicians, and the same Done Right Promise to your door. Call (863) 334-2933 and a live person answers.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Wilton Manors
Yes. Wilton Manors sits inside Broward County’s High Velocity Hurricane Zone, so any replacement window or door must carry HVHZ product approvals. This applies even when you are replacing like-for-like. Original jalousie windows cannot pass current wind-debris standards, so every renovation that touches openings triggers an upgrade to impact-rated glazing. Call (863) 334-2933 and we will pull the specific product approvals for your project before we quote.
Within two blocks of the Middle River or any of its forks, you should assume aluminum frames and hardware will corrode faster than inland Broward. Pitting and track failure typically show up in five to eight years. We recommend PGT impact-rated fiberglass or vinyl frames with stainless hardware for any lot that close to brackish water. The spec costs more upfront and saves a second replacement later.
You can choose any contemporary style you want. Original jalousies are not protected by any historic designation in Wilton Manors. Most owners switch to casement or single-hung impact-rated windows for better sealing and cleaner sightlines. If you want to preserve the mid-century appearance, architectural grilles and SDLs give you the divided-light look with modern hurricane glass. We will show you both options on paper before you decide.
Any oversized glass wall or commercial storefront in Wilton Manors needs wind-load engineering specific to the opening size and building orientation. Broward County requires HVHZ product approvals, and larger spans may need reinforced mullions or steel stiffeners. We coordinate with local engineers who work this corridor regularly, and engineering time appears as a line item on your quote, not a surprise later. That is the square deal we put in writing.
A fogged double-pane window is a failed seal, and once the desiccant inside the spacer is saturated, the fog will not clear. The insulated glass unit gets replaced, not repaired. In most Wilton Manors homes, this is a unit replacement within the existing frame, not a whole-window tear-out. Call (863) 334-2933 for an exact quote on the glass unit. Estimates are free, and we will tell you honestly whether the frame is worth saving.
TruePane Windows & Doors installs custom windows and doors in Wilton Manors the way a second-generation glazier should: compliance first, craft second, and a written warranty behind both. If you live in Wilton Manors and your windows or doors are original to a 1950s CBS ranch, the time to act is before the next insurance reinspection. Call (863) 334-2933 to schedule a free estimate. A live person answers, and Dale Kessler’s rule stays on the whiteboard: if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wilton Manors and surrounding Broward communities with custom window and door installations since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After