Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPella Windows & Doors in Hollywood, FL | TruePane Windows & Doors
We provide independent Pella Window Installation in Hollywood and door service throughout Hollywood, FL, from jalousie-era condos on South Ocean Drive to 1950s CBS ranches west of I-95. Unlike a manufacturer rep, we work on the Pella units already in your home or building, and we answer the phone when it matters: (863) 334-2933. The biggest difference here is code. Hollywood sits entirely inside Florida’s High Velocity Hurricane Zone, which means Pella products installed or repaired along the beach must carry product approvals most inland contractors never touch. That’s the work we do. Call us for a free estimate, and we’ll tell you straight whether a repair holds or a full impact-rated replacement is the only route to passing inspection.
Why Hollywood Residents Choose Us for Pella Service
Dale Kessler grew up in Hollywood’s Liberia neighborhood. His father spent weekends resealing jalousie frames against whatever the Atlantic decided to throw at them. That’s where his understanding of salt-driven window failure comes from, and it’s why our crew treats a corroded Pella casement hinge on A1A differently than one in a climate three hours inland.
We’ve torn down, re-glazed, and rebuilt Pella units across Broward for over a decade. We’re independent, so we’re not tied to a manufacturer’s script. When a Pella ProLine or Architect Series unit fails, we diagnose the actual mechanism and use genuine Pella OEM hardware when it’s available. When that hardware isn’t made anymore, we spec trusted aftermarket equivalents that meet or exceed the original fit. We stand behind that standard on every call.
Common Pella Windows & Doors Problems We Solve in Hollywood
Pella builds a good window. Hollywood tests it harder than most places. Here’s what we see week after week:
- Oxidation and pitting on aluminum cladding. Salt spray along ocean-facing and Intracoastal elevations breaks down the Pella EnduraClad finish within 5-7 years. On South Ocean Drive and Hollywood Beach, we’re often swapping corroded trim or re-coating frames on units that are still mechanically sound.
- Roller and track wear on Pella sliding patio doors. Sand and salt grit get into the track, wear down the rollers, and cause sticking or full derailment. This is the single most common Pella repair call we get from beachfront and Intracoastal condos in Hollywood, and it’s almost always repairable if the frame isn’t corroded through.
- Failed insulated glass seals. The year-round humidity in Hollywood shows up as fogging between panes on Pella Designer Series and Architect Series units. Once that seal fails, the glass loses its insulating gas, and the only fix is a replacement insulated unit, not a clean-up.
- Seized crank hardware on casement and awning windows. Mid-rise condos with Pella casements see crank mechanisms bind from salt air intrusion into the gear housing. Left too long, the operator strips, and the sash won’t close tight enough to keep rain out.
- Non-impact Pella units flagged in building inspections. Hollywood’s pre-1994 condos often have aluminum-clad Pella windows that are not HVHZ-approved. When an HOA runs a mandatory milestone inspection under SB 4-D, those units become line items in a building-wide replacement, and we help boards navigate that process with the right product approval paperwork.
Pella Service in Hollywood: What Local Conditions Mean for Your Equipment
Hollywood Beach condos built before 1994 commonly have Pella aluminum-clad windows that are not HVHZ-approved. That’s not a cosmetic issue. When an HOA undertakes a mandatory SB 4-D milestone inspection, these non-impact Pella units become the single largest line item for building-wide replacement, triggering a permitting process that requires product approval numbers specific to each building elevation. What this means in practice: a Pella window that works fine by itself may still fail the building’s code requirement, and the HOA can’t just call any contractor to swap it out. The permit application has to list the product approval for each elevation, and the window has to be installed so the frame ties into the concrete structure per current HVHZ flashing details. That’s a specialized paperwork-plus-installation job, and it’s almost exclusive to this narrow coastal Broward corridor. Measure it right, set it square, and the paperwork takes care of itself.
Pella Models & Products We Service in Hollywood
We service Pella Architect Series, Pella 350 Series, Pella ProLine, and Pella Impervia units across Hollywood. Architect Series tends to appear in high-rise condo lobbies and upscale custom homes. ProLine shows up in 1990s single-family homes and townhouses. Impervia is the fiberglass line, and it’s the one we most often recommend for owners who want Pella’s look without aluminum’s salt-corrosion problem. For every repair, we check whether genuine Pella OEM parts are the right call, and if the line is obsolete, we bring in aftermarket parts that won’t change the look or the fit. We keep common rollers, hinges, and weatherstripping stocked for fast turnaround in Hollywood, so you’re not waiting on a parts truck from the Midwest.
Pella Service Pricing in Hollywood
Pella service pricing in Hollywood typically runs $95-$150 for a diagnostic visit, $120-$250 for hardware and seal repairs per window, $275-$450 for replacing an insulated glass unit, and $800-$2,500 for full window replacement depending on model and size. Impact-rated Pella units push toward the higher end; ProLine and Impervia replacements usually land mid-range. A free estimate includes the diagnostic, a written line-item quote, and our honest read on whether repair or replacement is the better money. Call (863) 334-2933 for an exact number; we don’t quote without measuring.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Pella Windows & Doors in Hollywood
Yes. Pella does manufacture impact-rated lines with Miami-Dade Notice of Acceptance and HVHZ product approvals, and we install them in Hollywood condos under the correct building permit. The approval number must match the specific elevation and pressure zone for your building. We handle that paper trail as part of the estimate, and we register both warranty layers in writing. Call (863) 334-2933 for a building-specific product approval check.
On ocean-facing Hollywood units, the answer is often both. Sand and salt grit wear the rollers while salt spray attacks the frame track. If the frame is pitted but structurally intact, new stainless rollers and a track cleaning fix it. If the frame channel is corroded through, patching is a false economy, and replacement is the honest answer. We’ll tell you which one you’ve got during the free estimate. Call (863) 334-2933.
In most Pella Architect Series units, the insulated glass unit is replaceable without replacing the entire sash, provided the sash frame and hardware are sound. We remove the glazing stops, set a new IG unit, and re-seal to spec. If the sash is also corroded or the hinges are seized, then replacing the sash as a unit is the better long-term fix. We price both options side by side.
The milestone inspection itself looks at the building’s structural and electrical systems, but replacing non-impact windows with properly approved impact-rated Pella units is often a required repair item that follows the inspection. In Hollywood, that means selecting a Pella product with the correct HVHZ approval number for the building’s elevation and pressure zone, then pulling a Broward County permit for the work. We handle that end to end. Call (863) 334-2933 for a no-obligation review of your building’s requirements.
Uniformity rules in Hollywood condos typically mean the replacement window must match the existing look on every elevation. We work with the board and the property manager to spec a Pella line that satisfies the architectural committee, carries the correct HVHZ approval, and installs cleanly into the existing openings. We’ve done this on multiple South Ocean Drive and Hollywood Beach mid-rises, including projects where the board wanted marine-grade hardware swapped in without changing the exterior sightline.
Service Areas Near Hollywood
We service Pella windows and doors throughout South Broward and the coastal corridor. Pella sales & service covers the full range of models. Our Hollywood service area includes all neighborhoods from the beach to west of I-95. We also run crews in Pella service in Dania Beach and Pella service in Aventura, plus Pembroke Park, Hallandale Beach, and Sunny Isles Beach.
Book Your Pella Service in Hollywood Today
If your Pella windows are failing under salt, humidity, or code pressure, call TruePane Windows & Doors at (863) 334-2933. We’ll schedule a free estimate, measure the openings, and give you a written answer on repair versus replacement. No overtime charges for honest advice.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hollywood since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.