Andersen Window Replacement Nationwide | TruePane Windows & Doors

Andersen Window Replacement: The Hollywood Owner’s Guide

Andersen window replacement in Hollywood typically runs between $450 and $1,200 per window installed, depending on the series, glass package, and whether the sash, the frame, or both need to come out. We stock common Andersen-compatible sashes, balances, rollers, and hardware on the truck, and most single-window replacements are done in one visit. The way most Hollywood owners discover a window has failed is simple: it starts binding in the frame around June, or the glass fogs between the panes, or the sash drops two inches the moment you unlock it.

Call (863) 334-2933

What you’re looking at is rarely a mystery. Andersen windows ride on balances and rollers that wear on a schedule, especially in South Florida humidity and salt air. The good news is that the failed part is usually identifiable in about ten minutes by someone who knows the product line, and the replacement is often far less expensive than replacing the whole window.

Which Andersen Models This Applies To

We work on every major Andersen line still in circulation in Hollywood homes: the 200 Series and 400 Series (wood-clad and vinyl-clad), Narroline, Perma-Shield, and the newer 100 Series Fibrex. The older the home, the more likely you’re dealing with a Narroline or Perma-Shield gliding window from the 1980s or 1990s, and those have their own set of known failure points. The 400 Series Tilt-Wash double-hung is the single most common Andersen window we replace or repair in Hollywood, and its balance system is specific to that series: a 400 balance will not fit a 200, and vice versa, even when the visible sash size is identical. That is one of the most common ordering mistakes we see from homeowners who try to source parts themselves.

Andersen stamps a manufacturing code on the glass, usually in one corner, that identifies the series and the plant. If you can read that code, we can confirm compatibility over the phone before we ever roll a truck. If you can’t find it, our technician can pull it during the estimate visit. Andersen part numbers changed several times over the decades, so buying by “Andersen double-hung balance” without a series and sash size is a gamble. We match by measurement: sash weight, visible glass dimensions, and the profile of the shoe that clips into the jamb.

OEM vs. Quality Aftermarket Parts

Andersen OEM parts are well-made and carry the manufacturer’s backing, but they are not always the best value for an older window. A quality aftermarket balance or roller, dimensioned to the same spec, often performs identically and costs 30 to 40 percent less. Where we insist on OEM is with glass and weatherstripping, because the fit tolerances are tighter and the seal performance matters in Hollywood’s wet season. For balances, rollers, and lock hardware, we quote both options on paper and let the homeowner decide. We are an independent service provider, not an Andersen-affiliated dealer, so our recommendation is based on what holds up, not on what we’re obligated to sell.

Signs Your Andersen Window Replacement Is Failing

• The sash drops when you unlock it. This is almost always a failed or fatigued balance. Andersen balances lose spring tension gradually, then fail all at once, and a dropped sash can pinch fingers or crack the glass on the sill.
• You have to lift with two hands and lean into it. In a gliding window, this points to worn rollers or a track that is out of square. In a double-hung, it is usually the balance. The original Andersen roller was plastic-wheeled on steel; you don’t necessarily want that exact part again.
• Fog or condensation between the panes. The insulated glass unit (IGU) seal has failed. Once the seal goes, the argon or krypton fill escapes, the glass loses its energy efficiency, and the clouding will not go away on its own. This is an IGU replacement, not a whole-window replacement, but it should be caught early.
• The window binds at the top or bottom of the frame in summer. Aluminum and vinyl expand when they heat up. It may not be the hardware. Too often we come out after someone has “lubricated” a window for two summers straight and the frame reveal has dropped below Andersen’s spec. The window is moving within a frame that has shifted.
• The locking mechanism no longer fully engages or requires force. The keeper and strike on Andersen windows are wear items. A window that does not lock cleanly is a security issue and a weatherization issue in one.

Replacement Cost & What’s Included

In Hollywood, a straight balance replacement on an Andersen double-hung typically runs from $85 to $185 per window, including the part and labor. A sash replacement, where the frame is still sound, runs $250 to $600. A full window replacement, frame and all, lands in the $450 to $1,200 range depending on the series, size, and whether impact-rated glass is going in.

Here is how the typical Andersen work breaks down on paper:

• Balance or roller replacement: $85 to $185 per window
• Single sash replacement (frame intact): $250 to $600 per window
• Insulated glass unit (IGU) replacement: $200 to $450 per sash
• Full window replacement: $450 to $1,200 per window

What drives the range is the series, the size of the glass, and whether the existing frame is square or needs to be reset. We write the parts and labor separately on every quote, so you see exactly what you are paying for. Every Andersen replacement we install is covered by our Done Right Promise, with both manufacturer warranty layers registered in writing before the truck leaves the driveway.

DIY or Call Us?

There are a few things worth checking yourself before you spend a dime. Confirm the window is fully in its track. Remove debris from the sill with a soft brush. Check that the keeper and strike are not simply bent or loose. Those are safe homeowner checks.

What we advise against is opening the jamb to pull a balance cartridge or removing a sash without the right technique. A loaded balance spring carries real tension, and a slipped sash can take a finger or crack tempered glass. The older the window, the more brittle the jamb liner, and one wrong pop with a putty knife means you are buying the liner too. We have fixed more than a few “I tried it myself first” windows over the years, and the repair bill is always higher than the original fix would have been. If it will not close, will not stay up, or won’t lock, call us at (863) 334-2933 and we will send a technician who measures twice and quotes on paper before any work starts.

FAQs