Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Jeld-Wen Door Installation: The Hollywood Owner’s Guide
Jeld-Wen door installation in Hollywood typically runs $350-$900 installed for a standard prehung entry or interior door, and $1,200-$2,800 when we’re setting an impact-rated exterior unit that has to meet South Florida building code. We stock common Jeld-Wen hinge sets, thresholds, sweeps, and weatherstrip on our trucks, which means most single-door swaps are done in one visit. Most Hollywood homeowners discover the problem the same way: a door that bound in July suddenly won’t latch in January, or the sweep leaves a gap wide enough for palmetto bugs to march through sideways.
We’re an independent installer, not a Jeld-Wen dealer, so we’re not tied to pushing one product line. That matters when you need an honest answer about whether to repair, replace a part, or set a brand-new slab. Dale Kessler has been setting and troubleshooting doors in South Broward for nearly three decades, and the rule here is simple: measure the rough opening twice, set the jamb square, and the paperwork takes care of itself.
Which Jeld-Wen Models This Applies To
Jeld-Wen builds doors under a range of labels: the Auraline composite line, the Smooth-Pro fiberglass series, the W-2500 and W-4500 wood lines, and the Builders Series found in a lot of Hollywood track homes from the 1990s and 2000s. The part you need depends on which line you have, and that’s where things go sideways for a lot of homeowners. A Builders Series threshold doesn’t mate to a Smooth-Pro sill, and slapping on whatever the big box store has in the aisle is how you end up with a door that seals on one side and whistles on the other.
Look for the manufacturer sticker on the hinge edge of the slab. It gives you the series, the date of manufacture, and in some cases the original order number. If the sticker is gone, measure the slab thickness and the hinge spacing: Jeld-Wen interior doors are 1⅜ inches thick, exteriors are 1¾, and hinges sit at 7, 9, and 11 inches from the top on nearly every residential unit. Bring us those numbers and a photo, and we’ll match the part. We’ll tell you honestly when an aftermarket component is as good as Jeld-Wen branded and when it’s a false economy.
Signs Your Jeld-Wen Door Is Failing
- The door binds against the frame in summer. South Florida humidity swells wood slabs and jambs. If it’s been shaved once already and it’s binding again, the jamb has likely shifted, and the fix is re-hanging, not more trimming.
- There’s daylight under the sweep. The vinyl or brush sweep on a Jeld-Wen exterior door flattens after five to seven years in our sun. When you can see light under the threshold, water and insects have a clear lane inside.
- The door won’t latch without shoulder pressure. That’s a strike plate alignment issue or a sagging hinge. Either one gets worse every time you force the door shut.
- You hear wind through the weatherstrip. The Q-Lon compression weatherstrip Jeld-Wen uses lasts a long time, but once it’s compressed past the point of recovery, you’ll hear the Atlantic during a summer squall.
- The threshold is cracked or sagging. Jeld-Wen adjustable thresholds are aluminum with vinyl caps. Years of foot traffic and UV exposure crack the vinyl, and the aluminum underneath dents near the latch point.
Replacement Cost & What’s Included
For a standard Jeld-Wen interior door, installed, Hollywood homeowners should expect $350-$550. An exterior fiberglass or steel unit runs $650-$900, and impact-rated doors that require hurricane-resistant frames and hardware run $1,200-$2,800 depending on glass, finish, and whether we’re pulling a permit. Hollywood building code requires impact-rated or properly shutter-protected openings within hurricane wind zones, and we’ll tell you straight what your permit requires before we start.
Every quote includes the slab or part, hinges, hardware, weatherstrip, threshold, disposal of the old unit, and our labor. No surprise line items. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway, and our Done Right Promise covers the workmanship. If it’s not right, we make it right, no paperwork fights.
Key Takeaways
- Jeld-Wen door installation in Hollywood runs $350-$2,800 installed depending on interior vs impact exterior.
- OEM and quality aftermarket parts available; we match to your exact series, not whatever’s on the shelf.
- Most single-door jobs complete in one visit.
- Impact-rated exterior replacements must meet Hollywood hurricane code; we handle the permit.
- Every job carries our Done Right Promise and both warranty layers registered in writing.
DIY or Call Us?
If your Jeld-Wen door is dragging, you can check the obvious: are the hinge screws tight, is the strike plate lined up, is there a floor mat holding the sweep up? Those are five-minute inspections any homeowner can do. What you shouldn’t do is pull the center hinge pin on a heavy exterior door to “adjust” it. A fiberglass or steel slab with glass in it weighs enough to take a finger off if it comes loose, and a door that falls on you in a doorway is a good way to end up in a Hollywood emergency room.
Dale’s rule from his father’s days resealing jalousie frames in the Liberia neighborhood still holds: some jobs are about the tool, and some are about knowing when to set the tool down. If the jamb’s out of square or the rough opening has settled, that’s a re-hang, not a hinge adjustment. Call (863) 334-2933 and we’ll send a uniformed, background-checked tech to measure it right the first time.
FAQs
An interior Jeld-Wen door should last the life of the house if the jamb stays in place; exterior units in Hollywood realistically last 12-18 years before sun, salt air, and humidity wear out the weatherstrip, threshold, and finish. Well-maintained impact units with regular seal and hardware checks can outlast that. Call (863) 334-2933 if your door is pushing that age and starting to bind, we’ll tell you honestly if it’s repairable.
In most cases, yes, weatherstrip, sweeps, thresholds, hinge sets, and strike plates are replaceable parts and we carry common Jeld-Wen components on our trucks. If the slab itself is cracked, rotted, or the core has separated, replacement makes more financial sense. We’ll show you both options on paper with pricing before you decide, call (863) 334-2933 for a straight answer.
A standard prehung interior or exterior door swap takes 2-4 hours including removing the old unit, adjusting the rough opening if needed, and hauling away the debris. Impact-rated replacements requiring permits and new framing can run a full day or more depending on what Hollywood code review turns up. Most single-door jobs are done in one visit, and we’ll tell you the timeline before we set a single screw.
We stock common Jeld-Wen-compatible hinges, sweeps, thresholds, and weatherstrip on our trucks, along with hardware for Andersen, and Pella units. Odd-size slabs or specific series components that aren’t a standard size typically arrive in 3-5 business days, and we don’t start a job until every part is in hand. Call (863) 334-2933 with your model number or hinge-edge sticker info and we’ll check stock while you’re on the phone.
Get an Honest Quote for Your Jeld-Wen Door
If your Jeld-Wen door is binding, leaking air, or won’t latch, don’t guess. We’ll measure your opening, check the jamb with a level, and give you a written quote for the fix or replacement, with both warranty layers registered in writing before the job starts. A live person answers the phone 24 hours a day at (863) 334-2933. We’ve been serving Hollywood since 2008 through the TruePane standard, and we’ll still be here if something’s not right. That’s the promise.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After