Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPly Gem Energy-Efficient Windows in Hollywood: What to Know First
We provide independent Ply Gem energy-efficient window repair, glass replacement, and full-frame installation throughout Hollywood, FL. Most Ply Gem window jobs take a single visit, and we quote every job on paper before any work begins so there are no surprises on the bill. If you own a Ply Gem window that’s fogged, drafty, or letting the July sun turn your living room into a kiln, call (863) 334-2933 and we’ll measure it right before we quote a dollar.
This page is written for Hollywood homeowners who bought Ply Gem windows years ago and are now wondering whether to repair or replace. If you’ve noticed condensation between the panes, a rising FPL bill, or frames that sweat in August, you’re in the right place.
How Ply Gem Products Fail - and How We Fix Them
- Seal failure on the Premium and Classic series. Ply Gem’s insulated glass units use a two-part spacer system that, in South Florida’s humidity cycle, can break down faster than in drier climates. We see it most often on the Premium line installed during the 2005-2012 Hollywood building boom. The symptom is a milky haze between the panes that comes and goes with the weather. We replace the IGU with a fresh Low-E unit, matched to the original sightline, and register the glass warranty in writing before we leave.
- Warped sashes on the Mira series. The Mira uses a narrow-profile vinyl extrusion that’s fine up north but flexes under sustained heat. After ten-plus Hollywood summers, the sash can bow enough to break the weather-strip seal at the meeting rail, letting conditioned air escape. We can often shim and re-align; when the bow is too far gone, we quote a replacement sash against the cost of a full window so you can see the numbers side by side.
- Fogged glass on the Builder Series with failed argon fill. Argon dissipates naturally over 15 to 20 years, but in Ply Gem Builder Series units the fill port is a known weak point. Once the argon is gone, the window loses most of its insulating value despite looking fine. Our techs can test the glass, confirm the gas is depleted, and replace it with a Low-E argon unit that meets current ENERGY STAR specs for the South Florida climate zone.
- Hardware fatigue on the Pro Series awning and casement windows. Coastal salt air works on metal components no matter the brand. On Ply Gem Pro Series, we see the crank mechanisms and locking points corrode well before the glass fails. The window won’t seal when closed, and the energy loss shows up at the thermostat. We replace with OEM-spec operators or quality aftermarket equivalents, lubricate the tracks, and adjust the locking points so the sash sits tight against the seal.
- Failed glazing tape on the side-hung models from the 1990s. Ply Gem’s older side-hung, single-hung lines used a butyl tape that dries out and cracks after two decades of Hollywood sun. The glazing bead loosens, the glass rattles in the frame, and air infiltrates around the edges. We remove the old tape, clean the rabbet, and re-set the glass in fresh tape or structural silicone, depending on the frame. Done right, the window is tight again for another twenty years.
Our Ply Gem Energy-Efficient Windows Process
- 1
You call, a person answers. No voicemail tree. We take your address, the age and series of your Ply Gem windows if you know it, and what you’re seeing. We schedule the visit at your convenience.
- 2
We measure and diagnose on site. Every opening is measured twice. We check the glazing bead, the weather stripping, the hardware, and the condition of the insulated glass unit. We note whether the failure is the frame, the glass, or the installation from the original job.
- 3
We give you options on paper. OEM Ply Gem glass if available, a quality aftermarket IGU if it’s not, a sash replacement, or a full window replacement. We quote each line item separately so you see exactly what each piece costs and make an informed call.
- 4
We do the work in a single visit when practical. Most glass replacements and component repairs are done that day. We bring the part with us, not after a second trip. We clean up after ourselves and leave the jamb as neat as we found it.
- 5
We test the window and stand behind it. We check the seal, cycle the sash, and confirm the frame sits true. Then we register both warranty layers in writing, state the durations, and cover our workmanship for 90 days under the Done Right Promise. No paperwork fights, no arguing.
What Ply Gem Energy-Efficient Windows Costs in Hollywood
Plywood numbers are what you’re after, so here they are. Expect the cost to move based on the series, glass size, and whether we’re repairing the existing frame or replacing the whole unit.
- Single IGU replacement with Low-E glass: $185 to $420 per window, depending on size and coating.
- Argon-filled Low-E IGU with UV-blocking film: $240 to $510 per window.
- Sash replacement (Mira, Pro Series): $190 to $390 per sash, plus labor and any glazing work.
- Hardware repair and seal adjustment per window: $95 to $205.
- Full-frame Ply Gem replacement window, energy-efficient double-pane: $650 to $1,100 per opening installed, depending on size and style.
What changes the price: whether the glass is oversized or tempered code-required for a Hollywood home, whether we are matching an old sightline or fitting a modern Low-E unit into a narrow frame, and whether the original installation left the rough opening square or out of true. Call (863) 334-2933 for a free, line-item estimate. We measure twice before we quote a dollar, and the estimate is yours to keep whether you hire us or not.
Why Hollywood Homeowners Call TruePane Windows & Doors for Ply Gem Work
We’ve been serving Hollywood since 2008, and most of our Ply Gem calls come from people who had another company out first and did not like what they heard. Dale Kessler grew up in the Liberia neighborhood and has been setting windows in South Broward for going on three decades. The Keystone Standard is on every job: both warranty layers registered in writing, durations stated, and the Done Right Promise backing our workmanship. Our techs are background-checked, uniformed, and they quote manufacturer lines side by side on paper: Ply Gem, Andersen, Pella, PGT, and others. A live person answers the phone 24 hours a day, seven days a week. If the pane is not true, the job is not done.
FAQs
No, not when the work is done right. Independent glass replacement and proper hardware repair using manufacturer-spec components typically preserves what is left of the original warranty, and we register the new glass warranty in writing so you have a fresh layer with a stated duration. Call (863) 334-2933 and we can verify your window’s warranty status before we touch anything.
Yes, in most cases we can match the original Low-E coating and sightline closely enough that neighbors will not notice, though minor tint variations can occur when OEM units are no longer made. For exact matches, we quote OEM Ply Gem glass when available; for everything else we use a quality aftermarket unit built to current energy codes.
Most glass replacements take a single visit of two to four hours, depending on how many windows we are doing and whether the old seal material fights us. We arrive with the glass pre-cut and the hardware we need, so you are not left waiting for a second appointment.
If the frames are solid, the glass is the only failure, and the hardware still operates, repair is almost always the better value. If the frames are warped, the seals are gone on multiple units, or the original installation set the window out of true, replacement may cost less than chasing individual failures. We’ll give you both quotes and let you see the math. Call (863) 334-2933 for an exact take on your specific windows.
No. We quote a fixed price before we start and we do not add change orders unless you ask us to do work outside the original scope, which you will approve in writing first. The number on your estimate is the number on your bill.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.