Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI Impact Windows & Doors in Hollywood: What to Know First
CGI impact windows and doors in Hollywood typically cost between $900 and $2,800 per opening installed, depending on the series, size, and whether you’re replacing glass only or the entire frame. Most CGI repairs we handle are completed in one visit, and we give you the honest price before any work starts. If you own a CGI window or door that’s fogged, binding, or no longer closing like it should, this page explains exactly what’s going on and what it takes to set it right.
We’re TruePane Windows & Doors, an independent CGI service provider in Hollywood. That word “independent” matters. We’re not tied to a single manufacturer’s playbook, so we can tell you straight when a repair makes sense and when replacement is the smarter money. Call (863) 334-2933 and a live person answers, day or night.
How CGI Products Fail - and How We Fix Them
- Fogged glass on CGI Estate Collection units. Hollywood’s humidity works against every sealed unit, but Estate Collection windows from the mid-2000s show seal failure more often than later CGI lines. The desiccant inside the spacer saturates, condensation forms between the panes, and the insulating value drops. We replace the glass pack to original CGI specifications, not with a generic unit that throws off the sightlines.
- Stiff rollers on CGI sliding glass doors. CGI sliders are heavy, and Hollywood’s salt air corrodes the roller bearings faster than inland homes ever see. We regularly find rollers seized solid on doors less than eight years old. The fix is a full roller and track service using stainless hardware rated for coastal exposure, then a realignment so the door rides without dragging.
- Weatherstripping compression set on CGI Tribute series windows. After a decade of South Florida sun, the rubber weatherstripping on Tribute windows compresses and loses rebound. Air leaks at the meeting rail, the lock gets sloppy, and homeowners start feeling drafts. We replace with matched-density weatherstripping and reset the sash tension so the lock engages properly again.
- Damaged screens on CGI casement and awning windows. These screens are integral to the frame, so a torn screen is a bigger job than most people expect. We match the original mesh count and spline, which keeps the window looking factory-fresh and keeps bugs out during Hollywood’s rainy season.
- Failed interlock hardware on CGI horizontal sliders. The interlock between the meeting stiles takes the brunt of every hurricane-cycle wind load. When that aluminum extrusion starts to gall or the interlock hook rounds off, the window loses its structural rating even though it still opens and closes. We replace the hardware and verify the interlock is engaged square, because a slider that looks fine can fail when it matters most.
Our CGI Impact Windows & Doors Process
- 1
You call, a person answers. We ask about the symptom, the age of the unit, and whether you know the CGI series. That starts the picture before anyone gets in the truck.
- 2
We measure everything twice. On site, our technician identifies the exact CGI line, checks the rough opening dimensions, and inspects the frame, glass, hardware, and weatherstripping. Measure it right, set it square, and the paperwork takes care of itself.
- 3
We give you a straight answer. If the repair is warranty-safe and parts are available, we say so. If the numbers favor replacement, we quote CGI-compatible lines and alternatives like Andersen, Pella, and PGT side by side on paper, so you see exactly what you’re buying.
- 4
We do the work right, once. OEM parts where they matter, quality aftermarket where they perform better for less, and no surprise line items on the bill. Our techs are background-checked and uniformed, working in your home the way they’d work in their own mother’s.
- 5
We test, register, and stand behind it. Every opening is tested for operation, seal, and lock engagement. Both warranty layers are registered in writing before our truck leaves the driveway, and the Done Right Promise covers the workmanship, no paperwork fights and no arguing.
What CGI Impact Windows & Doors Costs in Hollywood
| Service | Typical Range in Hollywood |
|---|---|
| Glass pack replacement (fogged seal) | $350-$750 per pane |
| Slider roller and track rebuild | $275-$600 per door |
| Weatherstripping and sash adjustment | $150-$400 per window |
| Screen replacement (integral frame) | $90-$250 per screen |
| Full impact window replacement (installed) | $900-$2,200 per opening |
| Impact sliding glass door replacement (installed) | $2,500-$4,800 per door |
What moves the price: the CGI series, the opening size, whether the frame is sound or needs replacement, and parts availability for older lines. A homeowner in Hollywood’s Lakes section with a 2008 Estate slider will pay differently than one in Emerald Hills with a newer Tribute casement. We give you the number before work starts, in writing, with no change orders hiding behind the estimate. Call (863) 334-2933 for a free estimate.
Why Hollywood Homeowners Call TruePane Windows & Doors for CGI Work
Dale Kessler grew up in the Liberia neighborhood of Hollywood, where his father spent weekends resealing jalousie frames against whatever the Atlantic decided to throw at them that season. After high school, Dale enrolled in the building construction technology program at Broward College, where he learned to read a rough opening before he learned to drive a company truck. He’s been measuring, setting, and troubleshooting windows and doors in South Broward for going on three decades. That’s the person behind the work.
We’ve served Hollywood since 2008 through a heritage of craft and community commitment. When a CGI door binds in July or a window fogs in January, we answer the phone, show up when we say, and make it right under the Done Right Promise. We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. If a CGI repair doesn’t make financial sense, we’ll tell you that too, and quote the alternatives honestly. A square deal, every time.
FAQs
No. As an independent CGI service provider, we perform repairs that preserve the original warranty. We use OEM parts where required, register both warranty layers in writing, and document every step so your coverage stays intact. Call (863) 334-2933 if you have a specific warranty question about your CGI unit.
Most common parts, including rollers, weatherstripping, locks, and glass packs, are available within three to seven business days. Stock hardware for older CGI lines may take up to two weeks, but we’ll tell you the honest timeline before you commit, and most repairs are completed in a single visit once parts arrive.
Repair is usually the right call if the frame is sound and the glass is intact, with fogged seals, worn rollers, and failing weatherstripping being the most common fixable issues. Replacement makes sense when the frame shows corrosion, the interlock hardware is beyond repair, or the unit is over 20 years old and you’re facing multiple failures. We quote both options on paper so you can see the real difference, not a sales pitch.
Yes. We match the original CGI finish, whether it’s white, bronze, or a custom color. Glass packs are built to spec, and hardware is ordered to match the original series. If an exact match isn’t available for a discontinued line, we’ll tell you before ordering, not after.
We do. TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT. If you have mixed brands in your Hollywood home, we can service them all in one visit, with side-by-side quotes on paper so you see exactly what you’re buying.
Call TruePane Windows & Doors for CGI Work in Hollywood
If the pane is not true, the job is not done. That’s the rule that names our company and governs every install. If your CGI impact windows or doors are fogged, sticky, or failing inspection, call (863) 334-2933 and schedule your free estimate. A live person answers, 24 hours a day, 7 days a week. We’ll be there when we say, and we’ll stand behind the work in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After