Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Window Installation in Hollywood: What to Know First
Independent ES Windows window installation in Hollywood runs $340 to $1,900 per opening depending on the window type, size, and whether you’re replacing a sash, a balance, or full-frame rough-in work. Most ES Windows jobs wrap up in one visit, and we quote the work in writing before anything goes on the truck. If you own ES Windows and a window won’t close square or a casement crank has gone stiff, call (863) 334-2933 and we’ll set a time to measure it.
This page is for Hollywood homeowners who already have ES Windows products, or are considering them, and need installation done right by people who understand the hardware, the waterproofing, and the paperwork. Dale Kessler grew up on these streets and has been setting windows in South Broward for close to three decades.
Key Takeaways
- We’re an independent ES Windows service provider, not a factory arm, so we fix what’s actually wrong without voiding your warranty.
- Free estimates, written line-item quotes, and both warranty layers registered before we leave the driveway.
- Background-checked, uniformed technicians who measure every rough opening twice.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid aluminum frame. But Hollywood’s salt air and afternoon thunderstorms find every weak point in a window, and after ten or fifteen years those weak points have names. Here’s what we see most often on service calls across Hollywood, and what we do about it.
- Casement crank assemblies on the ES Studio line. The operator gear strips when the sash gets forced past its stop. Homeowners think the crank is shot, but half the time the real issue is a bent hinge arm from wind catching the sash. We replace the hinge and operator together, OEM when we can source them, because a new crank on a bent hinge fails again within the year.
- Single-hung balance failures in the ES Vinyl Series. Hollywood’s humidity swells the jamb liners along canalside properties in Lakes and Emerald Hills. The spring block slips in the channel and the sash won’t stay up. We pull the sash, inspect the pivot bar and shoe, and replace both springs on that sash so the load is even. One new spring on one side is a callback waiting to happen.
- Leaking fixed-picture window perimeters on early-2000s installations. In Hollywood, the culprit is usually flashing that was taped to the sheathing with no back dam, then covered in stucco. The window itself is fine. We remove the interior trim, reset the frame on a sloped sill pan, and reflash the perimeter. That is the fix that lasts, and it’s why we never caulk-and-walk a leak.
- Condensation between panes on the ES Thermal line. Failed seals are a manufacturing matter, not an installation one, but the replacement unit has to be ordered to the exact glass size and installed without twisting the frame. We measure visible glass, not the rough opening, and order the IGU through a South Florida supplier we’ve used for years. Then we pressure-test the new unit before we call it done.
- Sliding window rollers on ES aluminum horizontals. In Hollywood Beach and the barrier island, sand and salt work into the track. The rollers seize, the homeowner yanks the sash, and the frame posts torque out of square. We replaced rollers on a unit in Hollywood Lakes where the frame was pulled 3/16″ out of square by years of that exact fight. We squared the frame, replaced the roller assemblies, and the sash glides with two fingers now.
Our ES Windows Window Installation Process
- 1
Call and schedule. A live person answers at (863) 334-2933. We set a time, and our tech arrives uniformed and background-checked.
- 2
Measure the opening, not the old sash. We take rough opening dimensions, check the sill for level, and look for water intrusion signs in the framing. Measure it right and the paperwork takes care of itself.
- 3
Parts decision on paper. If it’s an operator failure, a balance, or a roller assembly, we quote OEM when available and quality aftermarket when OEM is discontinued. You see both prices and pick. No surprises.
- 4
The install. We remove the old unit or components, correct any framing or flashing deficiency we found, set the new window square and plumb, shim it properly, and fasten it per manufacturer spec.
- 5
Test and register. We cycle every sash, lock and unlock, run a water check on the flashing where applicable, and make sure your ES Windows installation is operating the way it should have from day one.
- 6
Paperwork and the Done Right Promise. Before the truck leaves, both warranty layers are registered in writing. If something isn’t done right within 90 days, we make it right. No arguing.
What ES Windows Window Installation Costs in Hollywood
| Job Type | Typical Range in Hollywood |
|---|---|
| Casement operator / hinge replacement (per window) | $340 - $620 |
| Balance or pivot shoe replacement (per sash) | $180 - $310 |
| Full frame ES window installation (standard size) | $800 - $1,400 |
| Impact-rated ES replacement (per opening) | $1,200 - $1,900 |
Price moves with size, opening height above ground, whether the existing flashing is serviceable, and whether the frame has been pulled out of square. A third-floor casement on a Hollywood Beach condo costs more to set than a first-floor slider in Emerald Hills, and that’s honest. Call (863) 334-2933 for a free estimate and a written line-item quote. Fixed pricing means the number we hand you is the number on the bill.
Why Hollywood Homeowners Call TruePane Windows & Doors for ES Windows Work
South Florida has plenty of window companies. Very few of them want to touch an existing ES Windows frame with a stripped operator or a fogged thermal unit. We do that every week. Dale Kessler grew up in the Liberia neighborhood of Hollywood, and our techs have been setting, squaring, and troubleshooting windows here for nearly thirty years.
We are background-checked, uniformed, and punctual. We’ll be there when we say. The Done Right Promise, backed by The Keystone Standard, covers your workmanship in writing. If the pane is not true, the job is not done, and we stand behind it. When a homeowner calls us about ES Windows, they also get the benefit of our experience with Andersen, Pella, and PGT on the rare job where another line serves them better. That’s a square deal, on paper, before we start.
FAQs
No. We’re an independent ES Windows service provider, which means we are not bound to a factory service path, but every installation we do is performed to the manufacturer’s installation spec. We register the manufacturer warranty in writing before we leave, so your ES Windows coverage stays intact. Call (863) 334-2933 if you want us to check your specific window’s warranty status before any work begins.
In most cases, yes, and that’s what we recommend when the frame is sound. Operators, balances, rollers, and even sealed glass units can be replaced without pulling the whole window. We’ll tell you plainly if a replacement is cheaper or smarter for your situation, but we never push a full replacement where a repair does the job. Call (863) 334-2933 with the symptoms and we’ll give you an honest answer.
Most common ES Windows operators, balances, and roller assemblies are in our hands within a week, and many standard parts are on the truck. Custom glass units take whatever the supplier quotes, typically two to three weeks. We don’t guess at parts availability. We check before we schedule and tell you exactly when we’ll be there.
Yes. The fix is a new insulated glass unit, not a new window. We measure the visible glass, order an IGU to the exact size, and install it in your existing frame. The frame stays, the glass gets replaced, and the fog disappears. Call (863) 334-2933 for a free estimate on your fogged ES Windows unit.
Both. We handle single-family homes throughout Hollywood, Hollywood Lakes, Emerald Hills, and also condo work wherever the association’s requirements allow. We’ll review any HOA or condo installation requirements with you before we quote so the job passes inspection the first time. Call (863) 334-2933 to schedule a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.