ES Windows Energy-Efficient Windows Nationwide | TruePane Windows & Doors

ES Windows Energy-Efficient Windows in Hollywood: What to Know First

ES Windows energy-efficient window repair and replacement in Hollywood typically runs $380 to $1,100 for glass assembly work and $900 to $2,800 for full sash or frame replacement, depending on the series, glass package, and how the original install was set. As an independent ES Windows service provider, we diagnose, repair, and replace these windows without voiding whatever warranty is left on the frame. Most energy-related fixes - failed Low-E coatings, argon leaks, worn weatherstripping - are completed in one visit, and we give you a line-item quote before any work starts. Call (863) 334-2933 and a live person answers, day or night.

Call (863) 334-2933

This page is for Hollywood homeowners who bought or inherited ES Windows and have noticed the glass fogging, the electric bill creeping up, or south-facing rooms that bake by noon. Dale Kessler grew up in the Liberia neighborhood, sealing jalousie frames against Atlantic weather. We know what ES Windows do well in this climate, and we know exactly where they give out.

Key Takeaways

• We are an independent ES Windows service provider, not a factory warranty desk. We work with the warranty when it applies and tell you straight when it doesn’t.
• Most energy-loss issues on ES Windows are seal failures, weatherstripping compression, or frame settling. These are repairable without replacing the whole window.
• Every ES Windows job gets both warranty layers registered in writing if replacement parts carry coverage. That’s The Keystone Standard, and it’s non-negotiable on our truck.
• Free estimates are real. We measure twice, quote on paper, and the price we quote is the price you pay.

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid product, but the Hollywood climate punishes every window eventually. Salt air, ten months of heat, and humidity that never quits expose any weakness in a seal, a gasket, or a frame joint. Here are the failure modes we see most on ES Windows in Hollywood homes, and what we do about them.

• Premature Low-E coating degradation on the ES 6000 series. We regularly pull sashes from south-facing bedrooms in Hollywood Hills and Emerald Hills where the Low-E film has turned hazy or developed a wavy pattern. The cause is usually solar gain combined with humidity trapped between panes after a seal starts to let go. The fix is a new insulated glass unit with a Low-E coating rated for our climate zone, not whatever the supply house has on the shelf.
• Argon gas loss through spacer failure on the ES 7000 series. When a window that used to hold 72 degrees now gathers condensation at the bottom corners, the argon is gone and the desiccant in the spacer is saturated. We order replacement IGUs with the correct spacer thickness for the frame pocket. This is not a reglaze job; the whole sealed unit gets replaced.
• Compressed and split weatherstripping on ES sliding windows. Hollywood’s heat cycles bake the pile weatherstripping in these sashes until it flattens and loses contact with the frame. You’ll feel the draft along the meeting rail. We replace it with OEM-grade pile matched to the extrusion channel, then set the sash so it compresses evenly at all four corners.
• Frame joint separation at the corners of ES casement windows. We see this most on windows installed before 2015, where corner keys in the extrusion flex under thermal expansion and contract. A gap opens at the miter, air moves through, and the sash sags. We square the frame, replace the corner key, and reset the sash so the hardware pulls it tight.
• Fogged glass mistaken for “normal wear.” It’s not normal. Fog between the panes means the seal has failed, period. On ES fixed windows along Hollywood Beach and the Intracoastal, we’ve seen seals fail in as little as seven years from salt exposure. We replace the IGU and check the glazing bead for degradation while we’re in there.

Our ES Windows Energy-Efficient Windows Process

Every ES Windows job follows the same sequence. It keeps the work square and the paperwork honest.

1. 1
   Call and talk to a person. You reach a live dispatcher, not a phone tree. We ask what the window is doing, the rough age, and the series if it’s printed on the spacer. Then we set a time.
2. 2
   On-site diagnostic and measurement. Our technician reads the rough opening and the existing glass pack, checks the spacer for the manufacturer stamp, and tests the sash for plumb and square. We figure out whether the problem is glass, frame, or hardware before we quote anything.
3. 3
   Parts decision. If the window is under warranty, we document the failure and work within the claim. If it isn’t, we price OEM and quality aftermarket side by side on paper and let you decide. You see the numbers, not a sales pitch.
4. 4
   The repair or replacement. The old unit comes out clean, the frame is checked for rot and settlement, and the new glass or sash goes in level and true. We use shims that won’t compress in Hollywood humidity, and we don’t caulk over a gap just to make it disappear.
5. 5
   Test and verify. We run the sash through its full travel, check the weatherstripping contact, and do a basic air-infiltration check at the frame. If the pane isn’t true, the job isn’t done.
6. 6
   Documentation before we leave. Both warranty layers get registered in writing, durations stated, while the truck is still in your driveway. That’s the Done Right Promise and The Keystone Standard, both.

What ES Windows Energy-Efficient Windows Costs in Hollywood

Every ES Windows job is priced off the actual condition, not a guess. Here’s the honest range for Hollywood homes.

What moves the price: glass size, whether the model line is still in production, whether the frame has shifted, and whether you want double-pane Low-E or a triple-pane glass pack. We quote on paper, fixed. No change orders, no surprise line items at the end. Call (863) 334-2933 for a free estimate. The estimate is free, and the price we hand you is the one we stand behind.

Why Hollywood Homeowners Call TruePane Windows & Doors for ES Windows Work

We’ve been serving Hollywood and South Broward since 2008. Dale Kessler founded TruePane in 2008 because he was tired of watching out-of-true installs and voided warranties get written off as “industry standard.” The rule on the whiteboard never changed: if the pane is not true, the job is not done.

On an ES Windows job, you get a technician who knows the product lines, not a trainee with a price sheet. We register both warranty layers in writing, state the durations, and put the workmanship guarantee at 90 days with no paperwork fights. If it isn’t done right, we make it right. No arguing. And because we’re an authorized installer for more than a dozen other lines -, PGT - we can match or beat what your ES product is doing without steering you toward something that doesn’t fit your house. We hire local, we train apprentices into journeymen, and if something goes wrong, we answer the phone. A live person, 24 hours a day, 7 days a week.

FAQs