Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Glass Railing Systems in Hollywood: What to Know First
As an independent ES Windows service provider, TruePane Windows & Doors repairs and installs glass railing systems for Hollywood homes, typically within a single visit once we have measured the opening. Real costs depend on whether you need a panel reset, a new tempered lite, or full railing replacement, which is why we give written line-item quotes after measuring, never over the phone. This page is written for Hollywood homeowners who own ES Windows products and need straight answers about repair, replacement, and cost. Call (863) 334-2933 and a live person answers, day or night.
Key takeaways: We are not an ES Windows authorized dealer, and we won’t pretend to be. What we are is a second-generation glazier’s shop that has measured, set, and troubleshot windows and doors in South Broward since 2008. Dale Kessler grew up in the Liberia neighborhood of Hollywood, and the standard here has always been the same: measure it right, set it square, and the paperwork takes care of itself.
How ES Windows Products Fail and How We Fix Them
ES Windows builds a solid frame. What we see in Hollywood is rarely the extrusion failing. It’s the hardware, the glass, and the way salt air works on fasteners over time. Here are the five failure modes we see most often on ES Windows glass railing systems in Hollywood:
- ES PureView series: delaminating laminated lites near the coast. Homes east of US-1 in Hollywood get constant salt spray. The interlayer in laminated glass starts to cloud at the edges after eight to twelve years. Owners think the panel is ruined. Most of the time, we can replace the lite and keep the original ES frame, which saves $400 to $700 per panel versus full replacement.
- ES Panorama series: loose base shoe anchors on concrete decks. Hollywood’s wet-dry cycle works concrete hard. The wedge anchors ES specifies can work loose. A panel that wobbles at the top is a safety problem, not a cosmetic one. We pull the shoe, reset with epoxy anchors where the concrete allows it, and torque to spec. Then we write the torque values on the invoice so you know exactly what was done.
- ES Apex series: glass slipping in dry-glazed channels. Heat expands aluminum, and a Hollywood August is unforgiving. When the glazing gasket dries out, the glass settles and the top edge drops out of level. We remove the lite, replace the gasket with a fresh EPDM run, and reset the panel square. No adhesive shortcuts.
- ES frameless panel-to-panel joints: water intrusion at the base. Frameless panels look clean, but the joint between panels sends water straight down to the shoe. If the drain slots are clogged with Hollywood’s summer storm debris, water pools and corrodes the anchors from the inside out. We clean the channel, verify drainage, and seal only where the manufacturer’s design allows it.
- Handle and latch hardware on ES gate panels. The spring-loaded latch on ES gate panels fails in two predictable ways: the internal spring rusts or the strike plate shifts. It’s a $40 part and 45 minutes of labor, but it can’t be adjusted blind. We measure the reveal, shim the strike, and set the latch so it closes without slamming.
A note on parts: we use ES Windows OEM hardware when the original warranty is still in effect and the part is available. When it isn’t, we use aftermarket hardware that matches the ES profile and finish, and we tell you the difference before we order anything.
Our ES Windows Glass Railing Systems Process
- 1
You call (863) 334-2933. A live person answers. You describe the problem. We schedule a time that works for you, and we show up when we say we will.
- 2
We measure everything twice. Rough opening, glass thickness, panel dimensions, anchor spacing, and the existing shoe condition. No repair starts without numbers in hand.
- 3
We put the options on paper. OEM versus aftermarket, repair versus replace, and the cost of each. Side by side, in writing. You decide, not us.
- 4
We do the work. Background-checked, uniformed technicians, working in your Hollywood home the way they would work in their own mother’s house.
- 5
We test before we leave. Every panel tapped for square, every anchor checked, every latch cycled. We walk you through what we did and what to watch for.
- 6
We stand behind it. Both warranty layers are registered in writing before the truck leaves the driveway. If it’s not done right, the Done Right Promise means we fix it. No paperwork, no arguing.
What ES Windows Glass Railing Systems Costs in Hollywood
| Service | Typical Range in Hollywood |
|---|---|
| Single panel reset and re-anchor | $180-$340 |
| Replace one laminated glass lite (ES PureView) | $450-$850 per panel |
| Replace glazing gasket and reset lite | $220-$420 per panel |
| Gate latch and hardware replacement | $90-$220 |
| Full railing section replacement (6-10 linear feet) | $2,100-$5,600 |
What moves the price: whether the extrusion can be saved, glass thickness, anchor condition in the existing concrete, and how many panels are involved. Hollywood homes with older decks sometimes need additional concrete work before anchors can be set properly. We quote that work separately so you know exactly what you are paying for. Call (863) 334-2933 for a free estimate. We measure first, then price it in writing.
Why Hollywood Homeowners Call TruePane Windows & Doors for ES Windows Work
We have been fixing windows and doors in this town longer than most of the homes we work in have been standing. Dale Kessler learned to read a rough opening at Broward College, and he has spent nearly three decades applying that skill on ES Windows, Andersen, Pella, Marvin, Milgard, PGT, CGI, and Jeld-Wen products. We are an authorized installer for more than a dozen manufacturer lines, and when an ES Windows part is backordered, we can draw on that multi-brand knowledge without losing a step. Every job is covered by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. A live person answers the phone whenever you call. We plan to be in Hollywood in thirty years, and we act like it.
FAQs
We are an independent ES Windows service provider, which means we do not process ES Windows warranty claims directly. What we do is register both warranty layers in writing on every job and document the work well enough that your claim stands a fair chance if you file it. If the warranty doesn’t cover the failure, we price the repair honestly and give you the paperwork either way.
OEM ES Windows hardware is usually available within 7 to 14 days, depending on the part. Common latch assemblies and glazing gaskets we often carry or can source within a few days. Aftermarket hardware that matches the ES profile is typically available within a week. We tell you the lead time up front, before you commit to the repair.
Most glass railing panel resets and hardware replacements are completed in a single visit. Full lite replacements require the glass to be ordered to size, so there is typically a measurement visit and a second visit for installation. We coordinate the whole thing and leave you with a working railing at the end of it.
No. We quote fixed pricing after measuring, and we don’t come back with change orders unless the concrete underneath the shoe turns out to be structurally unsound. In that case, we stop, show you what we found, and quote the additional work in writing before we touch it. A square deal means the bill matches the quote.
Yes. TruePane Windows & Doors offers a permanent 5% discount for seniors and veterans on every job, including ES Windows glass railing systems work in Hollywood. Call (863) 334-2933 for your free estimate and we will apply it to the quote.
Get Your ES Windows Glass Railing System Done Right in Hollywood
If your ES Windows railing has a wobble, a clouded lite, or a gate that won’t latch, don’t wait until it’s a safety hazard. Call (863) 334-2933 and schedule your free estimate. We measure first, price it in writing, and stand behind the work with the Done Right Promise. Dale Kessler has been setting windows and doors square in Hollywood for nearly three decades, and the rule on the whiteboard hasn’t changed: if the pane is not true, the job is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After