CWS Energy-Efficient Windows Nationwide | TruePane Windows & Doors

CWS Energy-Efficient Windows in Hollywood: What to Know First

TruePane Windows & Doors provides independent CWS energy-efficient window evaluation, repair, and replacement in Hollywood, FL. Most CWS window jobs run $240 to $1,850 depending on whether we’re resealing a failed insulated glass unit, rebuilding a worn sill track, or installing new ENERGY STAR-rated sashes in an existing frame. We’re an independent CWS service provider, not a factory-authorized dealer, which means we quote the repair that fits your window and your budget, not the one that pads a manufacturer program.

Call (863) 334-2933

This page is written for Hollywood homeowners who own CWS windows, have lived with them for years, and want straight answers on whether to repair or replace. If your CWS windows are fogging, hard to open, or letting afternoon heat through the west-facing glass, call (863) 334-2933 and ask for Dale. We’ll talk it through before anyone schedules a truck.

How CWS Products Fail - and How We Fix Them

CWS windows were built for Florida’s climate, but the Atlantic salt air and Hollywood’s humidity find every weak point eventually. Here’s what we see most on CWS units in this city, and what we do about it.

• Failed seals on CWS 200 Series insulated glass. After roughly ten to fourteen years, the desiccant strip inside the spacer loses its ability to absorb moisture. The tell in Hollywood is condensation between the panes that doesn’t clear by noon. We replace the sealed unit with a new double-pane argon-filled pack set to match the original sightline and glass tint, then foam-tape the new unit into the existing sash so the weather rating holds.
• Warped vinyl sashes on CWS single-hung units with western exposure. Hollywood’s late-afternoon sun bakes the west walls hard, and CWS single-hung sashes with narrow reinforcement channels tend to bow over time. You’ll notice the top corner lifting away from the weatherstrip, or a lock that won’t seat. We straighten what can be salvaged, but for sashes bowed past a quarter-inch we quote a new sash with stiffer steel reinforcement, cut to the original glazing bead depth.
• Worn jamb liners on CWS 100 Series double-hungs. The constant humidity in Hollywood swells then dries the nylon liners CWS used in early 100 Series windows. Once they crack, the sash drops or binds. We replace the liner pair and both sash balances, spec’d to the original tilt-latch type, and lubricate the channel so the window moves with two fingers instead of both hands.
• Water intrusion at the bottom weep holes on CWS sliding windows. Debris, paint, and years of Hollywood rain season floods clog the small square weeps on CWS sliders. Water pools in the track, soaks the inner felt weatherstrip, and wicks into the sill. We clear the weep path, replace the felt, and apply a sloped sill dam strip that sends water outside instead of under the frame.
• Failed spandrel tint on CWS aluminum-frame units facing east. Hollywood’s morning sun is hard on aftermarket window film, and on CWS aluminum windows installed in the early 2000s we see factory tint blistering at the glass edge. It doesn’t just look bad, it lets UV through and drives cooling loads up. We strip the failed film, clean the lite with a neutralizer that won’t etch CWS’s clear anodize, and install a dual-layer ceramic film rated for Florida’s heat gain zone.

Our CWS Energy-Efficient Windows Process

Every CWS job starts the same way: we listen first, then measure. Here’s how the work goes, from first phone call to final walkaround.

1. 1
   Phone call with a person. You call (863) 334-2933. Dale or one of our senior techs answers. We ask what the window is doing, how long it’s been doing it, and what model line you have if the label’s still legible.
2. 2
   Site visit and measurements. We come to your Hollywood home, measure every opening twice, and check the frame, the glazing bead, the hardware, and the wall condition around the window. Dale has been measuring openings in South Broward for going on three decades, and he still tapes the sill before anyone moves a screwdriver.
3. 3
   Parts decision on paper. If it’s a repair, we show you OEM CWS parts where they’re still available, alongside quality aftermarket equivalents, with prices listed side by side. If it’s a replacement, we quote the energy package that matches your Hollywood exposure: Low-E coatings, argon fill, and the right SHGC for the wall’s orientation.
4. 4
   The work itself. One crew, one visit, most jobs finished the same day. We pull the old sash or unit, prep the opening, set the new glass square and plumb, and foam-seal the perimeter before reinstalling trim. If the pane is not true, the job is not done.
5. 5
   Testing and verification. We operate the window through full travel, check the lock throw, run a smoke pen around the weatherstrip on a breezy day, and confirm the glass package matches what we wrote on the quote.
6. 6
   Paperwork before we leave your driveway. Both manufacturer warranty layers registered in writing, durations stated, and our Done Right Promise in your hand. No email attachments to chase later.

What CWS Energy-Efficient Windows Costs in Hollywood

Hollywood homeowners ask us for a price before we’ve measured anything, and Dale’s answer is always the same: it depends on what we find when we open the window. That said, here’s what CWS work typically runs in this city.

• Resealing a fogged CWS 200 Series fixed lite: $240 to $480, depending on glass pack size and whether the frame needs re-bedding.
• New Low-E argon-filled sash in an existing CWS single-hung frame: $380 to $720 per sash, including new weatherstrip and balance tune-up.
• Full-frame replacement for a CWS window with rotted or bowed frame: $1,200 to $1,850 per opening, including new jambs, trim, and perimeter insulation.
• UV-blocking film strip and reapply on CWS aluminum frames: $180 to $350 per window, depending on film grade and glass size.

What moves the price: sash size, frame material condition, whether the original CWS glass pack is still produced, and whether we’re matching an existing tint or installing a new Low-E package. We give a square deal on every quote, the number on the written estimate is the number on the bill. Call (863) 334-2933 for a free estimate on your specific CWS windows.

Why Hollywood Homeowners Call TruePane Windows & Doors for CWS Work

We’re not the cheapest bid in Hollywood, and we don’t plan to be. We’re the company people call when they’ve lived in their house for twenty years, remember the last crew that left a fogged seal and a door that binds in July, and want the job done right the first time. Every CWS job is backed by our Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves your driveway, durations stated, no arguing.

Dale Kessler grew up in the Liberia neighborhood of Hollywood, where his father spent weekends resealing jalousie frames against whatever the Atlantic decided to throw at them that season. That’s the lens we bring to every CWS windshield, sliding door, and single-hung we touch. We also service and install Andersen, Pella, and PGT, so when a CWS repair doesn’t make financial sense, we can quote an honest replacement from a line we trust. A live person answers the phone 24 hours a day, seven days a week. Call (863) 334-2933 and tell us what your windows are doing.

FAQs