Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Door Installation: The Hollywood Owner’s Guide
ES Windows door installation in Hollywood typically runs between $450 and $1,900 for the labor and hardware, depending on the door type, panel count, and whether we’re setting a new slab, rebuilding a track, or replacing rollers and weatherstripping on an existing ES Windows door. Most Hollywood owners call us after a door that once glided now drags, or a sliding panel that once sealed tight now lets the afternoon humidity in around the edge. We stock ES Windows-compatible rollers, tracks, locking hardware, and weatherstripping on the trucks that run Hollywood, so most single-panel jobs are done the same visit. We measure first, quote on paper, and set the door square before we leave.
That last point matters more than it usually gets credit for. A door installed a quarter-inch out of level will work for a season and then start wearing hardware at an angle. By the time you notice it, the rollers are already flat-spotted and the track is grooving. In Hollywood, where coastal air and summer humidity sit on aluminum and stainless year-round, the difference between a correct install and a close-enough install shows up within eighteen months.
Key takeaways:
- We install and service ES Windows doors across Hollywood, including sliding, French, and impact-rated models.
- Installed pricing ranges from $450 to $1,900 depending on the door configuration and condition.
- We stock ES Windows-compatible hardware on the truck for most single-panel jobs.
- Free estimates. Call (863) 334-2933 and a live person answers.
Which ES Windows Models This Applies To
ES Windows builds three lines we see most often in Hollywood homes: the 200 Series, the 300 Series, and the Impact-rated line that carries the Miami-Dade NOA for coastal exposure. The 200 and 300 Series share track profiles on most single and two-panel sliders, but the impact-rated doors use a beefier bottom rail and a different roller assembly entirely. If you take a roller from a 200 Series and put it in an impact door, it binds within weeks and chews the track. We’ve seen that exact shortcut on Hollywood callbacks.
How to identify what you have: look at the frame corner on the hinge or interlock side. ES Windows stamps the series number into the aluminum extrusion, usually on the door’s edge face, and the NOA number on impact models is printed on a small label near the bottom track. If the glass carries a tempered etch, it’s impact-rated and the hardware spec changes with it.
The OEM-versus-aftermarket decision for ES Windows doors is not a matter of brand snobbery. It’s a matter of track wear. ES Windows runs a proprietary rail profile on the 300 and impact series, and an aftermarket roller that is close but not exact will sit slightly proud in the track. It rolls, but it grinds the anodizing off over time, and then the track starts catching. We install OEM hardware on ES Windows doors unless the owner has already had a track retrofitted, in which case we match what’s there and note the deviation on the invoice so the manufacturer warranty conversation is honest from the start.
We are an independent service provider, not a corporate arm of ES Windows. What that means in practice: we can source the correct ES Windows hardware, we can install it to the manufacturer’s setting spec, and we register both warranty layers in writing under The Keystone Standard before our truck leaves your driveway.
Signs Your ES Windows Door Installation Is Failing
Most Hollywood owners do not call because the door stopped working entirely. They call because it started misbehaving in ways they cannot fix with a can of silicone spray. Here is what we see on the road, in order of frequency:
- The door drags or takes two hands to move. This is almost always flat-spotted rollers. Hollywood’s humidity causes the steel bearings inside cheap or worn rollers to rust, and once a bearing seizes, the roller slides instead of rolls. That slides the anodized finish off the track and the problem becomes a track replacement, not a roller swap.
- The panel jumps or scrapes at a certain point in the travel. That’s a track that has been grooved by a worn roller, or a door that was set slightly out of level and has worn the track unevenly. A grooved track will destroy a new roller set within months if it’s not addressed at installation.
- Daylight or a warm draft at the interlock or the bottom edge. The weatherstripping on ES Windows sliding doors is a compression seal. Once the pile or fin seal flattens, the door loses its air seal. In Hollywood this means the AC runs harder and the bug barrier is compromised. We replace the seal and check the panel alignment at the same time.
- The lock catches, but not fully. This is an alignment problem. The panel has settled or the rollers wore enough to drop the door by an eighth of an inch, and the hook bolt no longer seats in the keep. Forcing the lock just warps the hardware.
- Condensation inside the glass or a visible haze between the panes. That’s a seal failure in the insulated glass unit. The glass is not part of the door hardware, but it is a common companion problem on Hollywood doors that are over twenty years old. We can reglaze an ES Windows panel or order the replacement IGU to the exact spacer color.
If the door has dropped enough that the lock will not seat, do not keep forcing it. A misaligned hook bolt under pressure is how keepers get torn out of the frame, and that converts a hardware adjustment into a frame rail repair.
Replacement Cost & What’s Included
In Hollywood, here is what we quote for ES Windows door work, installed and with a written line-item invoice before work starts:
- Roller replacement, single sliding panel: $180-$340 depending on panel weight and whether it’s a standard or impact-rated assembly.
- Full roller and track service for a two-panel slider: $400-$750 including new rollers, track cleaning or replacement, and seal inspection.
- Weatherstripping and interlock seal replacement: $120-$260 with the correct ES Windows profile, not a generic box-store substitute.
- Locking hardware replacement or realignment: $140-$320 depending on the lock type and whether the keep needs to be recut.
- New ES Windows door slab, hanging and hardware setup: $900-$1,900 for standard and impact-rated slabs, plus the door cost if we order it.
The range is driven by three things: panel weight (impact-rated doors are heavier and the hardware costs more), track condition (a grooved track means replacement, not just roller service), and whether the opening itself is still square. In older Hollywood homes near the Intracoastal, we sometimes find frames that have shifted a quarter-inch over twenty years. We tell you before we touch it. You’ll see the measurements.
Every job is covered by the Done Right Promise, and under The Keystone Standard we register both manufacturer warranty layers in writing, durations stated, before the truck leaves. No surprise line items on the bill. We’re not the cheapest bid in Hollywood, and we have never tried to be. We are the last call you make on the door.
DIY or Call Us?
There are things an owner can safely check, and things that turn into a frame repair when done wrong. You can safely clean the bottom track with a vacuum and a dry cloth. You can inspect the rollers from the inside by lifting the panel slightly and shining a light under the edge. You can photograph the manufacturer label on the door edge so you know the series before you call anyone.
What you should not do is remove an ES Windows sliding panel to replace rollers unless you have help and know the panel’s weight. Impact-rated panels are heavy, the adjustment screws are set in tension, and a dropped panel bends the interlock and chips tile. We have taken apart enough of these to tell you plainly: the risk of injury and the cost of a bent rail far exceed the cost of letting a trained tech do it in an hour. Dale Kessler grew up in the Liberia neighborhood and has been setting impact-rated doors in South Broward for nearly three decades. The rule he keeps on the whiteboard is the one that applies here: measure it right, set it square, and the paperwork takes care of itself.
Call (863) 334-2933. A live person answers, twenty-four hours a day. We’ll bring the correct ES Windows hardware to your Hollywood home and quote it on paper before we touch the door.
FAQs
In Hollywood’s coastal climate, ES Windows door rollers typically last 8 to 12 years before the bearings start to rust and flatten, though doors closer to the Intracoastal or facing direct ocean air may wear them sooner. Impact-rated doors with heavier glass put more load on the rollers, so we inspect them as part of any seal replacement. Call (863) 334-2933 if your door has started dragging, and we can diagnose it by phone before we schedule.
In most cases, yes. Rollers, tracks, weatherstripping, and locking hardware are all replaceable components on ES Windows doors, and repairing them is almost always cheaper than a new door. We only recommend a new slab when the frame is bent, the glass has failed, or the panel is beyond an afternoon’s work. Estimates are free, and we’ll tell you honestly which one you need.
A single-panel roller or hardware service takes about an hour to ninety minutes in most Hollywood homes. A full two-panel track and roller service runs two to three hours, and a new door slab with clean-up usually finishes in half a day. We stock the most common ES Windows hardware on the truck, so most jobs are done in one visit with no second appointment left hanging.
Yes. We keep ES Windows-compatible rollers, track sections, weatherstripping, and lock hardware on our service vehicles that run Hollywood, along with hardware for Andersen, and Pella doors. If your door needs something we don’t have, we order it and tell you the lead time before we schedule. Call (863) 334-2933 with your door’s series number and we’ll check inventory while you’re on the phone.
If the door is dragging, binding, or leaking air at the edge, don’t wait until the track needs replacement too. Call (863) 334-2933 for a free estimate on ES Windows door installation in Hollywood. We’ll be there when we say, quote it on paper, and stand behind the work in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.