Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMilgard Door Installation in Hollywood: What to Know First
Milgard door installation in Hollywood typically runs $850 to $2,400 for a standard swing or patio door set, with custom and impact-rated units starting around $3,000. We complete most Milgard installations in one day, including trim and hardware. TruePane Windows & Doors is an independent service provider, not a factory-authorized shop, which means we source parts carefully and register every warranty layer in writing before we leave the driveway.
This page is for Hollywood homeowners who already have a Milgard door in the opening or want one installed correctly the first time. If you’re dealing with a Milgard that binds, leaks, or simply never sat square from the day it was put in, call (863) 334-2933 and we’ll send a tech who measures twice before quoting anything.
How Milgard Products Fail - and How We Fix Them
- Milgard Tuscany swing doors binding at the top corner. We see this on east-facing Hollywood homes where morning humidity works the frame. The real cause is usually a rough opening that was never shimmed square, not the slab itself. We pull the casing, reset the jamb, and rehang the slab so it clears by an even sixteenth all the way around.
- Monterey Series French doors sagging and scuffing the threshold. Milgard’s Monterey line uses a center-hinged astragal that carries real weight. When the hinge screws strip out of the jamb over a decade of Hollywood salt air, the active panel drops and starts dragging. Our fix is new structural screws into the jack studs, not longer screws into the same stripped holes.
- Milgard Ultra Series rollers wearing unevenly on patio sliders. The factory rollers on older Ultra Series units are nylon and they flat-spot in the heat. We replace with stainless-steel aftermarket rollers that match Milgard’s track profile. The door glides the way it did when it left the factory, and the warranty stays intact because we document the part swap.
- Trinsic Series weatherstripping pulling loose at the bottom corners. This happens more on Hollywood doors that face the afternoon sun on the west side. The kerf channel relaxes in the heat and the gasket slips. We re-kerf the bottom rail and set a marine-grade replacement strip that won’t walk out again.
- Milgard doors with fogged glass and no replacement sash available. Milgard’s full-lifetime glass warranty is one of the best in the industry, but the fine print requires the original homeowner to file the claim. When a Hollywood homeowner bought a house with a fogged Milgard and tries to claim it, the manufacturer often denies retroactive registration. So we quote insulated glass unit replacement through our local glass partner at a price that beats full door replacement, and we handle the IGU swap in-house.
Our Milgard Door Installation Process
- 1
Measure. Our tech checks the rough opening diagonal, level, and reveal every time. A Milgard door is only as good as the hole it’s set in, and a quarter-inch out of square shows up as a bind in nine months.
- 2
Diagnose. We explain what’s wrong in plain English: “The jamb’s been shimmed to a bow in the stud, that’s why it sticks at the top in July.” You get the full picture and the part options before anything gets ordered.
- 3
Parts decision. We lay out OEM Milgard parts versus quality aftermarket equivalents on paper. If the door is in production and the part is available, we use OEM. If it’s discontinued, we source a reputable aftermarket part and confirm measurements before ordering.
- 4
Install or replace. We set the jamb square and sealed, hang the slab, set the reveal, and adjust hardware. We work clean, shoe covers on, drop cloths down.
- 5
Test and walk through. We open, close, lock, and check the seal with a light-gap test along every side. We look for daylight. We explain what we did, what we saw, and what to watch for.
- 6
Paperwork. Before we pull out of the driveway, both manufacturer warranty layers are registered in writing, durations stated, and the Done Right Promise is on your invoice. No fine print. No follow-up phone call to chase a warranty card.
What Milgard Door Installation Costs in Hollywood
Here’s what we see in Hollywood, straight up:
- Single swing door install (labor only): $450 to $850
- Milgard Tuscany or Trinsic door, installed: $1,200 to $2,100
- French door pair install (with threshold and weatherseal): $900 to $1,600 labor
- Impact-rated Milgard door, installed: $2,800 to $4,500 depending on glass package and hardware
- Full frame replacement with new jamb and casing: add $300 to $600 to any of the above
What moves the price: whether the rough opening is true, whether you’re pulling permits (we will, if the job requires it), and whether the existing frame has rot from years of water sitting in the bottom corner. Every quote is free, in writing, and good for 30 days. Call (863) 334-2933 and we’ll come measure.
Why Hollywood Homeowners Call TruePane Windows & Doors for Milgard Work
We’ve been setting doors and windows in South Broward since 2008. Dale Kessler grew up in the Liberia neighborhood of Hollywood and learned early what a jalousie frame does when the Atlantic sends a storm through. He founded TruePane in 2008 on a simple rule: if the pane is not true, the job is not done. We still run every crew on that rule.
We stand behind every Milgard install with the Done Right Promise and The Keystone Standard. That means both warranty layers go into your name, in writing, before we leave. We don’t argue. We come back and fix it. We also install and service Andersen, Pella, and PGT, so if a Milgard part is back-ordered and you’d rather replace than wait, we can quote a comparable alternative side by side. A live person answers the phone at (863) 334-2933, twenty-four hours a day, seven days a week.
Frequently Asked Questions
Yes, in the sense that we register both manufacturer warranty layers for you and document every part we touch. As an independent Milgard service provider, we cannot file warranty claims as the manufacturer’s agent, but we make sure your installation never gives Milgard a reason to deny one. We also carry our own 90-day workmanship guarantee.
Usually yes. Milgard keeps parts for lines like the Classic and Monterey in production far longer than most manufacturers, but when a part is discontinued, we have three independent distributors in South Florida we pull from. If it’s truly gone, we’ll show you a compatible aftermarket option before we order anything.
We look at the frame, the glass, and the hardware separately. If the jamb is solid, the glass is clear, and the only issue is a roller or a hinge, repair makes sense. If the frame has rotted at the bottom corners or the glass package is failed and the door is fifteen years old, replacement is usually the better money.
Most single-door installations are done in one day. French and bifold units may run a day and a half. We’ll coordinate the permit if the city of Hollywood requires one for the job, and we’ll set a firm date before we leave your driveway.
No. The measure and inspection is free. You get a written, line-item quote with the part and price breakdown. If we think the door can be repaired for less than replacement, we’ll tell you that first. Call (863) 334-2933 to set one up.
Written by Dale Kessler, Owner, TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.