Mr-Glass Energy-Efficient Windows Nationwide | TruePane Windows & Doors

Mr-Glass Energy-Efficient Windows in Hollywood: What to Know First

We provide independent Mr-Glass energy-efficient window repair and replacement in Hollywood, with most single-unit jobs completed in one visit. We are an independent Mr-Glass service provider, not an authorized dealer, which means we’re free to quote the fix that actually serves your house rather than the fix that serves a franchise agreement. Pricing runs on a square-deal basis: you get a written line-item quote before any work starts, and the number on the paper is the number on the bill.

Call (863) 334-2933

This page is for Hollywood homeowners whose Mr-Glass windows are fogged, sweating, leaking air, or failing to hold a temperature. If you’ve read the manufacturer brochure twice and still can’t tell which energy rating applies to your unit, you’re in the right place. Call (863) 334-2933 and a live person answers, day or night.

How Mr-Glass Products Fail - and How We Fix Them

After three decades of pulling Mr-Glass sashes out of Hollywood rough openings, we know exactly how they fail and what it takes to make them right. Here are the patterns we see most often, named by series where it matters:

• Mr-Glass Classic Series - failed dual seals from salt-loaded humidity. The Classic Series used a thinner desiccant strip in the spacer bar than what we see in comparable PGT or CGI units. In Hollywood, where summer humidity sits above 70 percent for months on end, that strip saturates early. The glass fogs between the panes, the argon leaks out slowly, and the U-factor climbs without you noticing until the August electric bill arrives. We replace the insulated glass unit with a thicker-desiccant assembly and a stainless steel spacer, then rebalance the sash so it doesn’t fight the new glass weight.
• Mr-Glass Series V - vinyl frame bowing that breaks the thermal break. The Series V vinyl extrusion has a thinner mid-wall than many builder-grade lines. Under direct Hollywood sun exposure on a west-facing wall, the outer wall expands at a different rate than the inner wall. Over ten or twelve years, that differential bows the frame enough to open a hairline gap at the meeting rail. Air moves through the gap, the Low-E coating gets bypassed, and condensation shows up on the interior glass edges in December. We straighten what can be straightened and replace what cannot, then re-shim the opening so the next frame isn’t fighting the same forces.
• Mr-Glass Premium Vinyl - failed argon gas retention. This is the one we see most on energy-efficient Mr-Glass units in Hollywood. The gas fill was never designed to survive our thermal swing, especially on south-facing elevations. We test with a gas analyzer, confirm the fill is gone, and replace the IG unit with an argon-krypton blend where the budget allows. The difference in window surface temperature is measurable the same afternoon.
• Mr-Glass impact-rated units - worn weatherstripping and track wear. On the impact lines that Hollywood required after Andrew, the interlocking stiles wear at the weatherstripping channel. The result is not a safety failure, but an energy failure: air infiltration rises, the sash rattles in a storm, and the energy rating stops matching the sticker. We replace the weatherstripping with a high-density Q-Lon profile and adjust the rollers so the interlock seats tight.
• Mr-Glass sliding doors - weep hole neglect that ruins the insulated glass. We see this on Hollywood homes where landscaping mulch or pavers have crept up against the track. The weep holes plug, water backs up into the frame, and capillary action draws it into the IG unit at the bottom seal. The fix is drainage first, door rebuild second. Pulling the door and resealing the bottom rail without cleaning the weeps guarantees the next IG unit dies the same way.

Our Mr-Glass Energy-Efficient Windows Process

Here’s how a typical Mr-Glass energy-efficiency job runs through our shop, from your first call to the final walkthrough:

1. 1
   We answer the phone and listen. You describe the symptom, we ask the questions that tell us which series you have, which direction the window faces, and whether it’s a fog, a draft, or a heating bill that won’t quit.
2. 2
   We test the glass and the frame. Our tech arrives with a gas analyzer, a moisture meter, and a straightedge. We measure the rough opening twice. We check the thermal break, the glazing bead, and the weatherstripping channels. If it’s a failed seal, we confirm which pane and how bad.
3. 3
   We figure out the right parts, not the easiest ones. For Mr-Glass units, we prefer OEM where the warranty is intact and the lead time is reasonable. Where the OEM part is the reason the window failed in the first place, we explain the aftermarket alternative and quote both side by side on paper. You decide with full information.
4. 4
   We do the work on schedule. Whether it’s an IG replacement, a full sash rebuild, or a complete frame re-set, we arrive when we say. The tech is background-checked, uniformed, and working in your home the way they’d work in their own mother’s house. Drop cloths down, sills taped off.
5. 5
   We test before we leave. We run a smoke pencil across the meeting rail, check the gas fill with the analyzer, and verify the sash travels without binding. We register both warranty layers before the truck leaves the driveway. That’s The Keystone Standard, and we don’t skip it.
6. 6
   We walk the job with you. You see the work, you see the paperwork, and you get the Done Right Promise in writing. If it isn’t done right, we make it right. No arguing.

What Mr-Glass Energy-Efficient Windows Costs in Hollywood

What you’ll pay depends mostly on whether we’re repairing the glass in an existing Mr-Glass frame or replacing the unit outright. Here are the ranges we quote most often in Hollywood:

What moves the price: the size of the unit, whether it’s impact-rated, how many stories up, and whether the frame is square enough to accept a new IG without a full re-set. We’ll never give you a number over the phone without measuring. Call (863) 334-2933 for a free estimate, and we’ll put the price in writing before a single piece of glass is ordered.

Why Hollywood Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We have been serving Hollywood and the surrounding communities since 2008, which means we’ve watched a lot of Mr-Glass windows meet the Florida climate and lose. Dale Kessler grew up in the Liberia neighborhood of Hollywood, taping off jalousie frames with his father on weekends, and he has spent the decades since earning a reputation for work that passes reinspection the first time.

When a Mr-Glass unit fails, we give you options: repair what’s worth repairing, replace what isn’t, and quote PGT, CGI, CWS, or ES Windows lines alongside the OEM so you understand the full landscape. The Done Right Promise covers our workmanship in writing. A live person answers the phone 24 hours a day, 7 days a week. And every technician who walks through your door measures twice and sets the pane true, because the founding rule hasn’t changed: if the pane is not true, the job is not done.

FAQs