Mr-Glass Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

Mr-Glass Shingle, Tile & Metal Roofing in Hollywood: What to Know First

We’re an independent Mr-Glass service provider in Hollywood, FL, and we handle shingle, tile, and metal roofing repairs and replacements on Mr-Glass systems throughout Broward County. Most Mr-Glass roofing calls we see in Hollywood take one to three days on site, depending on what the underlayment tells us once we lift the existing material. Pricing is straightforward: we measure, we quote on paper, and the number we give you is the number on the bill, with no change orders hiding behind the flashing.

Call (863) 334-2933

This page is for homeowners in Hollywood who own a Mr-Glass roof and want straight answers about how their system holds up here, what breaks, and what it costs to fix it the right way. If you’d rather talk than read, call us at (863) 334-2933. A person answers. Every time.

Key takeaways:

• We service Mr-Glass shingle, tile, and metal roofs in Hollywood as an independent provider, not as a manufacturer-authorized dealer.
• Most repairs run $350 to $1,900 depending on material type, roof pitch, and what the underlayment looks like once we’re on the deck.
• Warranty-safe practices matter on Mr-Glass systems, and we document every step so your paperwork is worth something if you ever file a claim.
• Live person answers the phone 24/7 at (863) 334-2933.

How Mr-Glass Products Fail, and How We Fix Them

Mr-Glass roofs in Hollywood face a specific set of conditions: salt air pushing in from the Atlantic, the late-summer lightning storms, and the kind of humidity that never really leaves. After years of working on these systems in neighborhoods from Emerald Hills to Hollywood Lakes, we see the same failure modes repeat. Here’s what actually goes wrong:

• Lifted tile edges along the eave line. On Mr-Glass flat-profile concrete tile, the bottom course takes the worst of wind-driven rain. In Hollywood’s storm season, water gets under the edge, saturates the underlayment, and the tile starts to settle unevenly. We see this most on older installations in the Driftwood and 441 corridor neighborhoods where original underlayment was never rated for our humidity. The fix is not just resetting the tile. We lift the affected area, replace the degraded felt or synthetic underlayment underneath, and reset the tile with correct headlap.
• Shingle granule loss on west-facing slopes. Mr-Glass architectural shingles on the west side of a Hollywood home take relentless afternoon sun. Granule loss happens faster here than inland because of the UV index combined with salt. The symptom homeowners notice first is grit in the gutters every time it rains. Once the asphalt mat is exposed, the shingle is done. We replace individual shingles when the roof is less than 10 years old and the remaining field is sound. When the granule loss is widespread, we talk about a partial reroof, not a patch job that buys you 18 months.
• Metal roof seam separation at the ridge. On Mr-Glass standing-seam metal roofs, the ridge cap fasteners loosen over years of thermal expansion. In Hollywood, where the roof deck swings from 50 degrees to 140 degrees in a single season, the metal moves more than people expect. The seam opens, water follows the screw threads down, and you get rust staining on the underside of the cap. We remove the cap, inspect the seam, replace any corroded fasteners with properly gasketed screws, and reseal the seam with the right butyl tape and sealant for a coastal climate.
• Underlayment rot under tile valleys. This is the one that makes homeowners wince, because the tile looks fine from the ground. Mr-Glass tile roofs channel water into valleys, and if the valley metal wasn’t buttressed correctly or the underlayment overlaps were cut short during the original install, water gets between the layers. By the time you see a ceiling stain in a Hollywood home, the underlayment has been rotting for a while. We pull the valley tile, replace the underlayment and any deck damage, set new valley metal, and relay the tile. It’s a bigger job than a simple reset, but it’s the only fix that lasts.
• Fastener backout on tile systems. Mr-Glass tile installations in Hollywood sometimes get fasteners that back out of the deck, particularly on homes where the original crew over-drove screws into OSB. The tile lifts, rattles in wind, and eventually cracks at the fastener point. We replace the fastener with a properly seated screw or nail per the tile manufacturer’s spacing, replace any cracked tile, and check the surrounding rows so you’re not back up on a ladder in six months.

One thing we tell Hollywood customers: the number of years on a warranty means nothing if the installation practice underneath it was sloppy. Dale Kessler grew up in the Liberia neighborhood of Hollywood, and he’s seen too many Mr-Glass roofs fail early because of shortcuts at the deck, not because the material was bad. “Measure it right, set it square, and the paperwork takes care of itself.”

Our Mr-Glass Shingle, Tile & Metal Roofing Process

When you call us about a Mr-Glass roof in Hollywood, here’s how the job actually goes, start to finish:

1. 1
   The call and the first look. You reach a person at (863) 334-2933. We ask about what you’re seeing: leaks, lifted tile, granules in the gutter, a banging sound in the wind. We schedule a site visit. No voicemail, no callback form, no regional call center routing your message to a queue.
2. 2
   The inspection. We walk the roof, measure the affected area, and photograph everything. We’re looking at the material, the underlayment condition, the flashing details, and the fastening pattern. We also check the roof deck from the attic side when access allows. On a Mr-Glass system, we specifically check for the failure modes above: tile lift at the eave, valley underlayment, and fastener integrity.
3. 3
   The written quote. We hand you a line-item quote on paper. It shows the materials, the labor, the disposal, and the warranty registration we’ll file. We quote Mr-Glass-compatible materials side by side with any alternatives so you see exactly what you’re paying for. No surprise line items later.
4. 4
   The repair or replacement. Our uniformed, background-checked techs do the work. For tile and metal, that means proper underlayment, correct fastener depth, and resetting to manufacturer spacing. For shingle, it means clean replacement with matched color and correct nail placement, never over-driven into the deck.
5. 5
   The test. We water-test valley work and flashing repairs before we leave. On tile resets, we walk the rows around the repair. If there’s a leak source we can’t confirm, we say so, and we come back when the weather cooperates. We don’t leave a Hollywood roof unsure.
6. 6
   The paperwork. We register both manufacturer warranty layers in writing before the truck leaves your driveway. You get copies. The Done Right Promise covers the workmanship. If it’s not right, we make it right. No arguing.

What Mr-Glass Shingle, Tile & Metal Roofing Costs in Hollywood

Mr-Glass roofing work in Hollywood is priced by the material, the slope, and what we find under the surface. Here are the ranges we see on a typical call:

• Individual shingle replacement: $350 to $650, depending on roof slope and accessibility. Most shingle-only spot repairs land in the middle of that range.
• Tile reset with underlayment patch: $600 to $1,200. If the deck underneath is sound, this is a one-day job for our crew.
• Valley underlayment replacement with new metal: $900 to $1,900. The price moves with valley length, tile profile, and whether the deck needs repair.
• Metal roof seam reseal and fastener replacement: $450 to $1,100, depending on the linear feet involved and the condition of the existing cap.
• Partial reroof of a Mr-Glass shingle slope: $2,800 to $6,500 for a standard Hollywood ranch or two-story. Tile partial reroofs run higher because of the tile weight and underlayment requirements.

What moves the price in Hollywood: roof pitch (steep tile roofs in the Hollywood Hills area cost more to work safely), the condition of the underlayment once we lift material, and whether the original installation used code-compliant fastening. We quote a fixed price. You sign off on it. It doesn’t change. Call (863) 334-2933 for a free estimate, and we’ll get you a number in writing, not a vague range that doubles when the crew shows up.

Why Hollywood Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We’re a company that’s been serving South Broward since 2008 through a heritage of craft and community commitment, backed by Dale Kessler’s three decades of measuring, setting, and troubleshooting around Hollywood. We’re known for impact-rated installations that pass reinspection on the first visit. That same standard applies to every Mr-Glass roof we touch.

We understand Mr-Glass systems because we’ve worked on them across Hollywood, from the original tile in Hollywood Lakes to the metal roofs in newer construction off Stirling Road. And if your home has windows or doors from PGT, CGI, CWS, or ES Windows, we’re the crew that can handle the whole envelope, roof to sill, so you’re not juggling three contractors and three voicemail trees. We’re not a franchise. We hire local, train our apprentices into journeymen, and plan to be in Hollywood in thirty years. If it’s not done right, we make it right. That’s the Done Right Promise. That’s the whole point.

FAQs