PGT Energy-Efficient Windows Nationwide | TruePane Windows & Doors

PGT Energy-Efficient Windows in Hollywood: What to Know First

PGT energy-efficient window service in Hollywood typically runs $185 to $1,100 per window depending on whether we’re replacing a failed insulated glass unit, rebuilding a sash, or doing a full frame replacement. Most PGT repairs are completed in a single visit, and every quote is written line by line on paper before any work begins. We’ve been setting and servicing PGT windows in Hollywood for going on three decades, and the honest price posture is this: we don’t sell you a job you don’t need, and we don’t pad the bill with parts that didn’t need replacing.

Call (863) 334-2933

This page is written for homeowners in Hollywood, FL who own PGT windows and are tired of drafts, condensation between panes, or energy bills that climb every August. If you’ve got a PGT window that’s fogged, sticking, or letting heat bleed through the glass, call (863) 334-2933 and a live person will answer. No phone tree, no callback form.

How PGT Products Fail - and How We Fix Them

PGT builds a solid window, but every product has weak points. In Hollywood’s salt air and relentless UV, here’s what we see most often on PGT units, and how we address each one:

• Failed insulated glass seals on PGT WinGuard and SpectraGuard units. The dual-pane seal degrades under Hollywood’s heat and humidity, letting argon escape and moisture creep in. You see fog or haze that won’t wipe off. The fix is a new insulated glass unit set to the exact frame dimensions. On PGT frames we always check the glazing channel and drainage weeps before setting the new IGU, because a clogged weep is what kills the next seal.
• Deteriorating gaskets and weatherstripping on PGT Series 400 and 700 sliding windows. Florida sun bakes the rubber until it’s stiff and shrunken, and that’s when air infiltration starts. We replace the gasket with OEM-equivalent material rated for South Florida UV exposure, not off-the-shelf hardware store stripping that will crack again in two seasons.
• Warped interlocking meeting rails on PGT aluminum sliders. Salt air works on the hardware and the frame together, and over time the sashes stop sealing tight at the center. That gap is where your conditioned air leaks out. We true the rails, replace the pile weatherstrip, and reset the sash alignment so the lock actually pulls the seal tight.
• Failed argon fill without visible fog on PGT EnergySaver lines. You may not see fog yet, but the glass surface temperature on hot afternoons tells the story. When the Low-E coating is still fine but the gas is gone, the window’s U-factor has quietly climbed. We can thermal-scan the unit and replace the IGU before the seal fails completely.
• Brittle or cracked glazing beads on PGT casement and picture windows. The plastic beads shrink under heat stress and no longer hold the IGU in proper compression. We replace with factory-spec beads, not foam tape or caulk shortcuts. A loose IGU flexes in wind, and a flexing IGU fails sooner.

One thing we learned years ago from PGT jobs in Hollywood’s older neighborhoods: a fogged unit on a home built before 2002 is often not worth a patch job. The frame may be fine, but the spacer system in the original IGU was not built for the humidity this city throws at it. In that case we quote a new IGU with a modern warm-edge spacer and newer Low-E coating, and we show you the difference on paper before we order anything.

Our PGT Energy-Efficient Windows Process

When you call us about PGT windows in Hollywood, here’s the order of how it goes:

1. 1
   Call and talk to a live person. We ask about symptoms: fog, draft, sticking, condensation. We ask how old the windows are and which side of the house they’re on. Then we schedule a time and tell you exactly who will show up and what they’ll be driving.
2. 2
   On-site measurement and diagnosis. Our technician measures the opening twice, checks the frame for square, tests the glass surface temperature, and inspects the existing weatherstripping and drainage. We write down what’s actually wrong, not what’s easiest to sell.
3. 3
   Side-by-side quote on paper. We show you OEM PGT parts versus quality aftermarket options with prices and warranties for each. You decide what makes sense. The price we write is the price you pay. No change orders unless you ask for something different.
4. 4
   The repair or replacement, done the same visit whenever possible. We carry common PGT IGU sizes and hardware, and we’re set up to order and install what we don’t have in stock. The tech is uniformed, background-checked, and treats your home like his own mother’s house.
5. 5
   Testing before we leave. We check the seal, operate the sash, run a smoke test at the weatherstripping line, and verify drainage weeps are clear. If the pane is not true, the job is not done.
6. 6
   Both warranty layers registered in writing before the truck leaves. The Keystone Standard. We don’t leave paperwork to do. If something comes up within 90 days, we make it right. No arguing.

What PGT Energy-Efficient Windows Cost in Hollywood

Here’s the straight pricing for common PGT scenarios in Hollywood, FL:

• Insulated glass unit replacement, single window: $185-$420 depending on size, glass package, and whether it’s a standard rectangle or a shaped unit. Larger WinGuard or custom sizes run higher.
• Weatherstripping and gasket replacement per window: $90-$180 including materials and labor.
• Rebuilding a PGT sliding window (rails, rollers, weatherstripping, alignment): $220-$400 per sash.
• Full frame replacement with a new PGT energy-efficient window: $600-$1,100 per window installed, depending on size, glass package, and structural load requirements.
• Whole-house PGT energy upgrade on a 3-bedroom Hollywood home: typically $4,000-$9,000, depending on how many windows, frame condition, and whether we’re replacing sashes only or full frames.

What moves the price: window size, glass package upgrades (double vs triple, Low-E coating tiers), whether the frame is square enough to accept a new IGU or needs full replacement, and whether you’re in a coastal wind zone requiring impact-rated glass. We offer a permanent 5% discount for seniors and veterans, and a free written repair estimate. Call (863) 334-2933 and we’ll give you a written number after we measure. Estimates are free.

Why Hollywood Homeowners Call TruePane Windows & Doors for PGT Work

We’re an independent PGT service provider, not a factory-owned distributor, and that matters for one reason: we have no interest in selling you a brand, only in fixing your window correctly. Dale Kessler grew up in the Liberia neighborhood of Hollywood, resealing jalousie frames against the Atlantic with his father. He’s been measuring, setting, and troubleshooting windows in South Broward for almost thirty years. When we quote a PGT job, we quote it against what Andersen, Pella, and CGI offer for the same opening, side by side on paper. If a PGT part is the right call, we say so. If an aftermarket IGU with a better warranty makes more sense, we say that too. Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before we leave, durations stated, and a live person answers the phone 24/7 if you ever need us.

FAQs