Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPly Gem Window Installation in Hollywood: What to Know First
Ply Gem window installation in Hollywood runs $85-$165 per opening for a straightforward sash or balance replacement, and $250-$600 for a full window replacement depending on size, glass package, and whether the frame is salvageable. Most Ply Gem jobs are completed in a single visit; we stock the common balances, pivot bars, and tilt-latches so the work doesn’t stretch into a second appointment. We’re an independent Ply Gem service provider, not a factory representative, which means we fix what’s actually wrong instead of steering you toward a whole-house replacement you may not need.
This page is for Hollywood homeowners who own Ply Gem windows, know the brand well enough to ask hard questions, and want the work done right the first time. Call (863) 334-2933 with your window style and the symptoms you’re seeing, and we’ll tell you honestly whether a repair makes sense or a replacement is the square move.
How Ply Gem Products Fail - and How We Fix Them
- Ply Gem Pro Series double-hungs: spring balance failure. The Pro Series is Ply Gem’s vinyl flagship, and the most common failure we see in Hollywood is the constant-force balance wearing out, leaving the sash too heavy to lift. In a salt-air climate like ours, the coil spring inside the balance corrodes faster than the manufacturer’s average. We replace both balances in the opening, not just the failed one, because a mismatched pair will bind within a season.
- Ply Gem Premium Series casements: crank and operator wear. Casement operators on Premium Series units take a beating in South Florida because homeowners open them daily for salt breeze. The worm gear inside the operator strips over time, and the window won’t stay open. We replace the operator and the hinge track together, using OEM parts when available or a heavy-gauge aftermarket match when the OEM part has a lead time measured in weeks.
- Ply Gem 2000 and 1500 Series sliders: roller and track damage. These builder-grade lines are common in Hollywood neighborhoods built in the 1980s and 1990s, particularly east of US-1. The rollers flatten after two decades of sand and salt grit accumulating in the track. We pull the sash, clean the track, replace the rollers with a sealed-bearing version, and re-tune the frame so the window glides instead of grinding.
- Ply Gem Mira Series awnings: hinge rivet failure. Mira Series awning windows hinge at the top, and the factory rivets are aluminum. After eight to ten years of salt exposure in Hollywood, those rivets develop play, the sash sags, and the seal breaks. We drill out the old rivets and set stainless steel pivots, which outlast any factory hardware in a coastal install.
- Ply Gem impact-rated units: improper install leaving the frame proud of the rough opening. We see a fair number of impact-rated Ply Gem windows in Hollywood that were installed by out-of-state crews who treated them like standard vinyl. The frame gets set proud of the rough opening, the fasteners land in the wrong place, and the performance rating is voided before the first storm season. We reset the unit, fasten per the Miami-Dade anchoring schedule, and register the install paperwork in writing.
Our Ply Gem Window Installation Process
- 1
Call and answer the real questions. You call (863) 334-2933, a live person answers, and we ask what the window is doing, not just what brand it is. Ply Gem made seven different balance designs over the years; the symptom tells us which one you have.
- 2
On-site measure and diagnosis. We come to your Hollywood home, pull the sash out of the opening, and measure everything twice. Dale Kessler grew up in the Liberia neighborhood of Hollywood, where his father spent weekends resealing jalousie frames against whatever the Atlantic decided to throw at them that season. We learned early that the window is only as good as the opening it sits in.
- 3
Parts decision on paper. We quote OEM Ply Gem parts and a quality aftermarket option side by side, with the difference explained in plain English. You approve the number before we touch a screw.
- 4
The install. Our technician sets the window square, shims the frame properly, fastens per Ply Gem’s engineering, and towels off the sill. If the opening has rot, we tell you before we cut anything.
- 5
Test and register. We cycle the window a dozen times, check the seal with a smoke pen, and register both manufacturer warranty layers in writing before the truck leaves the driveway. The Keystone Standard applies whether the repair took forty minutes or half a day.
- 6
You get the Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no fine print that covers neither.
What Ply Gem Window Installation Costs in Hollywood
You’re not buying a window so much as paying for the labor to set it correctly, and that’s where the real cost lives. In Hollywood, expect $85-$165 per opening for balance, tilt-latch, or roller replacement on most Ply Gem double-hungs and sliders. Awning hinge replacement runs $120-$190 per unit. A full vinyl replacement window, installed, runs $250-$600 depending on size and glass package; a Ply Gem impact-rated unit in a standard opening runs $1,800-$3,400 including anchoring and permits. The wind zone in your neighborhood, your stucco thickness, and whether the original install left the rough opening square all move the number. We give free estimates with written line-item quotes. Call (863) 334-2933 and we’ll come measure. Measure it right, set it square, and the paperwork takes care of itself.
Why Hollywood Homeowners Call TruePane Windows & Doors for Ply Gem Work
We’ve been serving local communities since 2008, founded by second-generation glazier Dale Kessler in 2008 out of a principle that out-of-true installs and voided warranties were problems worth fixing permanently. Our technicians are background-checked and uniformed, and they know Ply Gem hardware well enough to tell you when a part is worth replacing and when the window has earned its retirement. We’re also authorized installers for more than a dozen other lines including, and PGT, so if your Ply Gem window is past repair, you’ll see what the alternatives actually cost before you commit. Every job carries our Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves the driveway. We stand behind it.
FAQs
Yes, we can install and service Ply Gem windows still under factory warranty, but we always check the warranty language before doing work that might void it. Ply Gem’s warranty covers the manufacturer’s defects, not installation labor, so we register both warranty layers and give you the exact durations written down. Call (863) 334-2933 with your serial number and we’ll walk you through what the warranty says.
We use genuine Ply Gem parts when they’re available and reasonably priced, and we quote a quality aftermarket option alongside so you see the difference. Some Ply Gem balance designs have long factory lead times, and a sealed-bearing aftermarket replacement can be the better square deal. We’ll show you both numbers and let you choose.
If the frame is square, the glass seal is intact, and the failure is hardware like a balance or roller, repair almost always makes sense and costs a fraction of replacement. If the seals are fogged or the vinyl frame has cracked, replacement is the honest answer. Call (863) 334-2933 and we’ll give you a straight recommendation, not a sales pitch for a whole-house job.
Most Ply Gem window installation jobs are completed in a single visit, and a live person answers the phone 24/7 to schedule. We don’t put you on a voicemail tree or have a callback form. Call (863) 334-2933 and we’ll set a time.
Yes, we register both manufacturer warranty layers in writing before we leave the driveway, durations stated. That’s The Keystone Standard on every job. We don’t leave warranty registration as an exercise for you to handle later.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.