Simonton Impact Windows & Doors Nationwide | TruePane Windows & Doors

Simonton Impact Windows & Doors in Hollywood: What to Know First

TruePane Windows & Doors provides independent Simonton impact window and door service in Hollywood, FL, with most repairs and replacements completed in a single visit. We are not a Simonton dealer and we are not authorized by the manufacturer. We are an independent Simonton service provider, and that independence means we recommend the repair that makes sense for the window in front of us, not the one that pads a sales quota. Typical Simonton work in Hollywood runs from $95 for a simple hardware adjustment to $1,800 or more for a full impact-rated door replacement, and every quote is written line-item before any work begins.

Call (863) 334-2933

This page is for the homeowner who has Simonton windows or doors already installed and wants to know who in Hollywood actually understands the product, the climate, and the building code. Call (863) 334-2933 and our team will talk through the issue and schedule a measurement visit. Dale Kessler founded TruePane on a simple rule: if the pane is not true, the job is not done. That rule applies to every Simonton window we touch.

How Simonton Products Fail - and How We Fix Them

Simonton builds a solid window, but every line has failure patterns that show up in Hollywood’s salt air and hurricane season. Here is what we see on service calls:

• Simonton StormBreaker Plus sashes binding at the jamb. The aluminum-reinforced vinyl on StormBreaker Plus is rigid, which is good for impact resistance. But Hollywood’s summer humidity swells the surrounding stucco and framing just enough that the sash starts dragging against the jamb. Owners assume the window is warped. It is usually the installation opening shifting, not the sash. We mark the high side, pop the interior stop, and shave or realign the jamb so the sash travels clean again. Most of these are fixed the same visit without replacing the window.
• Simonton Reflections 5500 weep holes clogging with salt residue. This is a Hollywood-specific failure Simonton’s national documentation does not address well. The Reflections 5500 is a middle-tier vinyl line that relies on weep holes at the sill to drain wind-driven rain. Within two to three hurricane seasons, ocean salt and fine sand from Hollywood’s coastal wind pack those holes solid. Water pools in the track, then wicks into the interior drywall at the sill. Owners see a soft spot below the window and assume the frame failed. We clear the weeps, verify the sill pitch, and in severe cases re-slope the exterior sill with a small bead of adhesive caulk before reinstalling the window. If you live east of Federal Highway in Hollywood, check your weeps once a year or have us do it during a tune-up.
• Simonton Madeira casement cranks stripping at the gear teeth. The Madeira line uses an older-style worm gear operator. After 15 or 20 years of someone cranking against the full force of a wind gust, the gear teeth round off and the crank spins free in one direction. The aftermarket operators sold through big box stores are plastic-bodied and fail within two years. We source the OEM metal-bodied operator or, when the product line is discontinued and the OEM part is no longer produced, a milled-aluminum aftermarket replacement we have tested on Hollywood’s Madeira installs. We also set the arm limit so the sash stops just short of full compression, which doubles the life of any new operator.
• Simonton impact doors sagging at the hinge stile. Impact-rated doors carry 1-1/4 inch of laminated glass per panel, which is heavier than standard insulated glass. On older Simonton sliding and hinged impact doors, the constant weight pulls the hinge stile out of square over the years. A door that latched cleanly in 2016 now catches at the top. We re-square the frame by adjusting the hinges and shimming the jamb, then we check the sweep and threshold to restore the impact seal. Simonton’s warranty only covers the door unit, not the installation, so if the original installer set the rough opening out of plumb, this is an installation problem we correct.
• Failed argon fills in Simonton Impressions 9800 vapor barriers. The Impressions 9800 is one of Simonton’s higher-end impact glass packages, and the interlayer is excellent. The weak point is the perimeter seal around the insulating glass unit. After enough Hollywood UV exposure, the desiccant saturates, the argon fills leak out, and you get a fogged unit even though the impact rating is still intact. We replace the IGU with a Simonton-compatible unit that matches the original thickness and Low-E coating, then re-register the remaining warranty layers with the manufacturer. You keep the impact protection, lose the fog.

Our Simonton Impact Windows & Doors Process

Here is how a Simonton job runs through our shop, from the first call to the final walkthrough:

1. 1
   Call and describe the issue. A live person answers at (863) 334-2933, even at 2am when a windstorm has blown a door off its track and left an opening. We ask about the symptom, the age of the unit, and the model line if it is marked on the spacer or sticker.
2. 2
   Measurement and diagnostics visit. Our technician measures every opening twice, verifies plumb and level on the frame, and identifies the root cause before naming a price. We never quote over the phone without seeing the window or door.
3. 3
   Parts decision, in writing. We present the options on paper: OEM Simonton parts with their exact lead time, or a quality aftermarket part with our recommendation. Our team tells you which one we would use in our own mothers’ houses, and we register both manufacturer warranty layers before the truck leaves the driveway.
4. 4
   Repair or replacement. We do the work in a single visit whenever the parts are in hand, respecting your home with drop cloths, shoe covers, and uniformed, background-checked technicians.
5. 5
   Post-installation test. We cycle open-and-close five times on every repaired sash, test the sweep seal with a feeler gauge, and check the drainage path by running water through the weeps.
6. 6
   Done Right Promise. We walk you through what was fixed and why, then hand you the paperwork. If it is not done right, we make it right within 90 days. No arguing.

What Simonton Impact Windows & Doors Costs in Hollywood

Simonton work in Hollywood is priced by the unit, the failure, and the parts path. Based on the jobs we quote across Hollywood Lakes, Emerald Hills, and East Hollywood, here are the ranges homeowners see:

• Weep hole clearing and sill re-seal: $95 to $180 per window, depending on access and how much silt must be removed.
• Casement operator replacement (OEM or upgraded aftermarket): $140 to $320 per window, parts and labor.
• Impact door re-squaring and hardware adjustment: $180 to $450 for a hinged or sliding unit, including new sweep if needed.
• Insulating glass unit replacement (fogged or failed seal): $300 to $900 per sash depending on glass size, thickness, and Low-E coating.
• Full StormBreaker Plus impact window replacement: $1,200 to $2,600 per window, installed and warrantied, depending on size and whether the existing frame can be reused.
• Full impact sliding door replacement: $3,500 to $7,200 for a Simonton or comparable impact-rated unit, measured and installed to current Florida Building Code wind-load requirements for Hollywood’s exposure category.

What moves the price: whether the rough opening is square, whether the frame is salvageable, OEM versus quality aftermarket parts, and the wind-load rating required for your zone. We give you a fixed, line-item price before work begins and not one surprise on the final bill. Call (863) 334-2933 to schedule a free measurement and exact quote for your Simonton windows and doors in Hollywood.

Why Hollywood Homeowners Call TruePane Windows & Doors for Simonton Work

We have been doing this work in Hollywood since 2008, through three building code eras and more hurricane seasons than we care to count. Dale Kessler grew up in the Liberia neighborhood of Hollywood, where his father spent weekends resealing jalousie frames against whatever the Atlantic decided to throw at them that season. That is not marketing copy. It is the reason our techs treat every Simonton window like the thing standing between a family and the storm.

Every job is covered by our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. We stand behind it. We also maintain multi-brand expertise across Andersen, Pella, and PGT, so when a homeowner has mixed-brand openings or is weighing a Simonton repair against a different brand replacement, we quote manufacturer lines side by side on paper, and the homeowner sees exactly what they are buying. Most of our Hollywood customers have been in their homes twenty years or more. They do not want a sales pitch. They want the window done right and a company that answers the phone in ten years. That is the deal we offer.

FAQs