Simonton Window Installation Nationwide | TruePane Windows & Doors

Simonton Window Installation in Hollywood: What to Know First

Independent Simonton window installation in Hollywood typically runs from $85 to $225 per window for labor when replacing glass or hardware, while full frame replacements on larger Simonton units start around $450 per opening. Most Simonton jobs we handle are completed in a single visit, and we’ll give you the real number in writing before we touch a screw. We’re a locally rooted shop serving Hollywood since 2008, not a manufacturer hotline, and we quote every Simonton job side by side on paper so you see exactly what you’re buying. If you own a Simonton window that’s fogged, binding, or leaking at the sill, call (863) 334-2933 and a live person answers, day or night.

Call (863) 334-2933

How Simonton Products Fail - and How We Fix Them

Simonton builds a solid mid-range window, but we’ve been called out to enough Hollywood homes to know where their units give up first. Here’s what we see and what we do about it:

• Fogged glass on Reflections 5500 and 5050 series: These units were popular in Hollywood tract builds from the mid-1990s through the 2000s. The spacer bar corrodes from salt air intrusion at the sill, and once the seal goes, moisture gets between the panes. The fix is a full insulated glass replacement, not a seal patch. A patch fails, the replacement holds.
• Spiral balance failures on Simonton Double Hung units: After ten to fifteen years, the spiral balances inside the side jambs lose tension. The sash won’t stay up, or it drops hard. We replace the balance assemblies with OEM-spec or higher-quality aftermarket parts and reset the tilt latches. The window should not need to be held open with a dowel rod.
• Weep system clogs on Impact and StormBreaker lines: Simonton’s drain system is designed to channel water out through the sill, but Hollywood’s summer debris and salt buildup clog the weep holes. Water pools, the sash swells, and the frame eventually rots at the corners. We clear the system, reseal the sill dam, and check the slope to make sure water drains away from the frame, not into it.
• Roller wear on Simonton Slider and patio door lines: Simonton patio and horizontal sliders ride on nylon rollers that grind down unevenly, especially after years of sand blown up from the beach. The door binds, and homeowners assume the track is shot. The track is fine. We replace the roller assemblies, clean the track, and adjust the strike for a clean close.
• Warped sashes on older Simonton casement and awning units: South-facing Simonton casement windows in Hollywood take a decade of sun and salt. The sash pulls out of square, the lock doesn’t engage, and the crank struggles. We measure the reveal on all four sides, reset or replace the hinges and roller mechanisms, and re-square the sash before testing the lock lash.

Our Simonton Window Installation Process

Here’s how Simonton window installation works when you call us. No surprises, no short cuts.

1. 1
   Measure the opening twice. We check both diagonals and the reveal before anything gets ordered. A rough opening that’s out of square is the root of most Simonton install problems. If it’s out of square, we correct the shim pattern before the window goes in.
2. 2
   Identify your exact Simonton line and model. We read the corner marker or the label on the spacer bar. The fix on a Reflections 5500 is not the same as the fix on a mid-grade Simonton slider. We match the job to the product, not the other way around.
3. 3
   Decide OEM vs. quality aftermarket parts, on paper. We quote both where both exist. For some Simonton assemblies, OEM is the only sensible call. For others, a higher-spec aftermarket part will outlast the original. You see the line items and the reasoning before the work begins.
4. 4
   Install and seat the unit square. We set the frame, shim the jamb, insulate the rough gap, and drive the fasteners on schedule. Flashing and sill sealing get extra care in Hollywood, because salt air is harder on a frame than any storm.
5. 5
   Test operation and drainage before we pack up. We cycle the sash, check the weep flow with a controlled pour, and strike the locks. If anything binds, it gets fixed before we leave, not on a callback.
6. 6
   Register both warranty layers in writing. We file the manufacturer warranty and our Done Right Promise documentation before the truck leaves the driveway. No paperwork fight later.

What Simonton Window Installation Costs in Hollywood

Most Simonton window installation work falls in these ranges in the Hollywood market. The final number depends on glass package, frame condition, and whether we’re rebuilding an existing sash or replacing a whole unit.

• Fogged glass replacement, Simonton Double Hung: $180-$310 per sash
• Balance assembly replacement, Simonton Single or Double Hung: $95-$185 per window
• Casement hinge and crank rebuild: $140-$260 per window
• Sliding patio door roller replacement: $165-$285 per panel
• Full Simonton window install into square rough opening: $450-$850 per opening, depending on glass and frame

What moves the price: rotted framing at the sill corners, an opening that’s significantly out of square, or an upper-story window that requires ladder work. What doesn’t move the price: hidden fees. We quote upfront, in writing, and we don’t add a line item you didn’t approve. Call (863) 334-2933 and we’ll come measure, quote both parts options, and leave you a number that won’t change when the work starts.

Why Hollywood Homeowners Call TruePane Windows & Doors for Simonton Work

We’ve been setting windows in South Broward since 2008. Dale Kessler grew up in the Liberia neighborhood of Hollywood, and the founding rule on the whiteboard hasn’t changed: if the pane is not true, the job is not done. Every Simonton job carries the Done Right Promise, backed by The Keystone Standard, which means both warranty layers get registered in writing with durations stated, before the truck leaves the driveway. A live person answers the phone 24 hours a day, not a voicemail tree. And if your Simonton unit isn’t worth repairing, we quote replacement options from Andersen, Pella, and PGT side by side on paper, so you know exactly what you’re getting and what it costs.

FAQs

Will repairing or installing my Simonton windows void the manufacturer warranty? No. Our work preserves your existing Simonton warranty where it’s still active, and we register both warranty layers in writing under The Keystone Standard. If the unit is already out of warranty, we tell you that straight, and we quote the repair as a repair, not as a warranty claim.

Can you match new Simonton windows to my existing ones? In most Hollywood homes, yes. We match the line, the glass package, the grid profile, and the frame color as closely as the current Simonton catalog allows. If your exact model was discontinued, we’ll show you the closest current match and a comparable quality line, side by side on paper.

Is it better to repair a Simonton window or replace the whole unit? It depends on the frame and the glass package. If the frame is sound and the seal or hardware is the problem, repair usually costs half or less of a replacement. If the sill corners are rotted or the glass package is obsolete, replacement is the square call. We measure, we show you both numbers, and the decision is yours.

How long does Simonton window installation take? Most repairs and single-window installs are done in one visit, usually two to four hours depending on the condition of the rough opening. Multi-window jobs may take a full day or more, and we’ll give you a straight schedule before the first window comes out.

Do you charge for the estimate? No. We come out, measure, quote on paper, and leave the number with you. If you call (863) 334-2933, a live person answers and gets you on the schedule. There’s no charge for the estimate, and no obligation.

Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.