Therma-Tru Impact Garage Doors Nationwide | TruePane Windows & Doors

Therma-Tru Impact Garage Doors: The Hollywood Owner’s Guide

We stock and install Therma-Tru-compatible impact garage doors throughout Hollywood, with most complete door replacements running between $2,800 and $5,400 installed depending on size, series, and whether you’re replacing the door only or the full track and opener assembly. We carry the common Therma-Tru impact-rated door components on our trucks, so a failed hinge, bracket, or roller swap is usually a single-visit job. Most Hollywood homeowners discover a problem the same way: the door starts binding on one side, a roller chews itself apart, or the bottom seal starts peeling away after a season of Atlantic salt air.

Call (863) 334-2933

Which Therma-Tru Models This Applies To

Therma-Tru builds impact garage doors under a handful of series lines, and the compatibility question is where we see the most confusion on service calls. The door’s wind-load rating and panel construction dictate which hardware it takes, not just the brand name on the sticker. If your door has a Therma-Tru label on the inside edge of the top panel, start there. Most Florida-rated Therma-Tru impact doors use a heavier gauge track than a standard inland door, and the rollers are often nylon-encased steel with sealed bearings built for the humidity we get in Hollywood from June through October. A 2-inch roller that fits a standard residential track will bind fast in a Therma-Tru impact door because the track profile is often narrower.

The practical distinction that matters: OEM Therma-Tru parts are manufactured to the door’s original wind-load certification, which matters if your home is in one of Hollywood’s High Velocity Hurricane Zones (HVHZ), generally east of Federal Highway. Quality aftermarket equivalents exist for non-structural components like weatherstripping and hinge bushings, but anything that bears wind load, the hinges, the struts, the bottom brackets, we recommend staying OEM. One compatibility gotcha we see weekly: Therma-Tru doors built before 2012 used a different bottom bracket mounting pattern than post-2012 production, so a bracket ordered from the model number alone can miss by half an inch. We always measure the bracket face and bolt spacing before we order.

Signs Your Therma-Tru Impact Garage Door Is Failing

• The door shudders or jerks when opening or closing. Almost always a worn roller or a hinge that has loosened under wind-load cycles. Left alone, it wears the track unevenly and turns a $60 part into a $700 track replacement.
• One side sits lower than the other when closed. That means a spring has lost tension or a cable has begun to fray. In Hollywood’s salt air, cables corrode faster than they do inland, especially in homes within two miles of the Intracoastal.
• The bottom seal is cracked, peeling, or letting daylight through. This is the most common Therma-Tru failure we see. The rubberized seal used on Florida impact doors breaks down under UV exposure in about 3 to 5 years here, and once it separates, you get leaves, water, and lizards under the door.
• Loud grinding or squealing from the roller tracks. Usually means the bearings inside the rollers have failed. If you hear metal-on-metal, the roller has started chewing the track itself. That’s a stop-using-the-door problem, not a spray-it-with-WD-40 problem.
• The door flexes visibly when you press on the center panel. An impact door should feel rigid. Flex means a strut has broken or separated from the panel, and the wind-load rating is compromised until it’s replaced.

Replacement Cost & What’s Included

For a full Therma-Tru-compatible impact garage door installed in Hollywood, most homeowners spend between $2,800 and $5,400. A single-panel repair, say a roller bundle or a hinge assembly, is far less, usually $140 to $320 with labor and the part. The range on full replacements is driven by three things: door width and height, whether you need the track and spring assembly replaced, and which panel series you’re matching. A 16-by-7-foot door costs more than a single-car 9-by-7. Wind-load requirements east of Federal Highway, where HVHZ codes apply, can push the door spec and the price higher. Every quote we give is line-itemed on paper before work starts, with the parts cost separated from the labor. The warranty on our work is straightforward: 90 days, in writing, and we honor it without asking you to fill out a claim form first. The manufacturer warranty gets registered before our truck leaves your driveway, with the term stated on the paperwork.

DIY or Call Us?

There are things you can check safely on a Therma-Tru impact garage door: look at the rollers with the door closed, run your hand along the bottom seal to find splits, and watch the door open once from inside to see if it tracks evenly. That’s diagnosis. Anything involving the torsion springs, the cables, or the bottom brackets is not a DIY job, and we’ll say it plainly: a high-tension spring releasing under load can cause serious injury or worse. Even seasoned DIYers call us for spring work, because on impact-rated doors the springs are matched to the door’s weight and wind-load spec, and an under-sprung door is a door that fails when a storm is already at the edge of the neighborhood. If you’ve found a failing part or you’re not sure what you’re looking at, call (863) 334-2933. We’ll tell you what we think over the phone, and if it needs a hands-on look, we’ll schedule a time and show up when we say.

FAQs