Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Hollywood: What to Know First
Therma-Tru roof replacement and installation in Hollywood typically runs between $8,500 and $24,000 depending on the roofline, decking condition, and whether you’re dealing with a straight re-cover or a full tear-off. Most jobs take five to nine working days once materials land, and we quote fixed pricing after we’ve walked the roof and measured. As an independent Therma-Tru service provider, TruePane Windows & Doors handles the installation side with the same standard we bring to every opening: measured right, set square, and registered in writing before we call the job done.
This page is written for Hollywood homeowners who already own a Therma-Tru product and need the roof work above it done without drama. If you’re in Emerald Hills, Hollywood Lakes, or out near the Seminole Hard Rock and you want a straight answer on scope and cost, call (863) 334-2933. A live person answers, day or night.
Key Takeaways
- Independent Therma-Tru service provider, not manufacturer-affiliated.
- Fixed pricing after a physical inspection, never a guess over the phone.
- Both manufacturer warranty layers registered in writing before we leave the driveway.
- Done Right Promise on every job, no fine print.
- Serving Hollywood and South Broward since 2008.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru makes a solid door and a decent entry system, but Hollywood’s salt air, afternoon thunderstorms, and unrelenting sun expose weak points faster than the product literature suggests. Here’s what we actually see on roofs across Hollywood, and what we do about it.
- Therma-Tru Fiber-Classic and Smooth-Star slab splitting at the top rail. These fiberglass-skinned doors absorb heat unevenly against dark roof shingles, and after ten or twelve Hollywood summers, the top rail starts to micro-crack where the sun bakes it hardest. The real cause is usually a roof gutter or downspout that’s been feeding water onto the door header for years. We fix the drainage first, then replace the slab and reset the reveal so the door isn’t fighting the jamb. If you replace the slab without addressing the water, you’ll be calling again in three years.
- Therma-Tru Benchmark composite doors swelling in August humidity. The Benchmark line uses a polyurethane core that’s good on paper but tight-tolerance hinges and jamb pockets leave little room for the natural expansion Hollywood’s wet season brings. We see Benchmarks that won’t latch in July and swing free in January. Our fix is a full hinge adjustment plus a light jamb pocket rout where needed, and we re-weatherstrip the perimeter while we’re there. The key is doing it when the door’s at its worst, not when it’s dry and obedient.
- Therma-Tru patio door threshold leaks after roof replacement. This is a Hollywood-specific failure we see constantly after a roofing crew tears off and re-installs without flashing the threshold pan correctly. Water finds the gap where the new drip edge meets the old door pan, and the threshold rots from underneath. We pull the door, inspect the sub-sill, rebuild the pan, and set the door back with a continuous aluminum pan that drains to the exterior. It’s the difference between a door that lasts twenty years and one that’s soft in five.
- Therma-Tru side lite and transom seal failures around roof penetrations. When roofers run new boot flashings for plumbing vents or HVAC curbs, they often bump the caulk line on adjacent door and window trim. Therma-Tru’s factory sealants are good, but they’re not designed to survive a pry bar slipping against them. We re-glaze, re-caulk with a marine-grade sealant that handles Hollywood’s UV load, and double-check the frame anchorage while we’re up there.
- Therma-Tru Multi-Point locking hardware binding after structural settling. Roof replacement changes the load on the top plates, especially on older Hollywood homes with truss roofs. When the framing settles even a quarter inch, a Therma-Tru multi-point lock that used to turn with two fingers now needs two hands. We re-align the keeper plates, adjust the gearbox, and if the hardware’s too far gone, we source genuine Therma-Tru replacement parts rather than generic copies that never time right.
Measure it right, set it square, and the paperwork takes care of itself. That’s the rule on every one of these fixes, and it’s the rule that’s kept us in Hollywood since 2008 under Dale Kessler’s name.
Our Therma-Tru Roof Replacement & Installation Process
- 1
Call the number. A live person answers 24/7 at (863) 334-2933. We take your address, ask what you’re seeing, and book a walk-through that fits your schedule.
- 2
On-site inspection. We walk the roof, check the decking, look at how the Therma-Tru products are set against the current roof line, and note every problem before we write anything down.
- 3
Written line-item quote. You get a fixed price on paper before any work starts. OEM Therma-Tru parts priced separately from quality aftermarket alternatives, so you decide with your eyes open.
- 4
The work. Background-checked, uniformed technicians handle the roof work and the Therma-Tru integration the same day where possible. No subcontracted crews, no mystery installers.
- 5
Test and reinspection. Every door, window, and roof penetration gets tested for function and water-tightness before we call it done. If something doesn’t pass, we stay until it does.
- 6
Paperwork and promise. Both manufacturer warranty layers registered in writing, durations stated, and the Done Right Promise in your hand before the truck leaves the driveway.
What Therma-Tru Roof Replacement & Installation Costs in Hollywood
Straight talk on pricing, because Hollywood homeowners who’ve been burned once deserve a number, not a dance. Here’s what we see on Therma-Tru related roof work across South Broward:
- Full tear-off and re-roof on a standard Hollywood ranch (1,200-1,600 sq ft): $8,500-$14,000 depending on shingle grade and decking repairs.
- Re-roof with Therma-Tru door and threshold pan rebuild: add $900-$1,800 for the door work, including new pan, flashing, and re-weatherstripping.
- Therma-Tru patio door sub-sill replacement after roof leak: $700-$1,400 depending on rot extent and whether the door needs a new threshold core.
- Therma-Tru entry door replacement tied to a roof replacement (Fiber-Classic or Smooth-Star): $2,200-$4,800 installed, including the new slab, hinges, and factory finish matching.
- Multi-point lock hardware replacement on a Therma-Tru Benchmark: $340-$650 with genuine Therma-Tru parts.
What moves the price: decking rot, rafter tail damage from past leaks, whether the existing Therma-Tru door was flashed correctly the first time, and whether you want architectural shingles or basic three-tab. What doesn’t move the price: anything you didn’t approve in writing. Call (863) 334-2933 for a free estimate that doesn’t change once we start.
Why Hollywood Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’re not a franchise, and we’re not the cheapest bid you’ll get. What we are is the company that’s been in Hollywood and South Broward since 2008, run by a second-generation glazier who grew up in the Liberia neighborhood and still answers to his name. Dale Kessler started TruePane in 2008 because he kept seeing one thing: out-of-true installs and voided warranties that homeowners didn’t discover until the first storm season. That’s why we register both manufacturer warranty layers in writing before the truck leaves the driveway. It’s why every job carries the Done Right Promise with no paperwork fights and no arguing. And it’s why we train our own apprentices into journeymen instead of hiring day labor. If you own Therma-Tru now and you’re thinking about PGT, CGI, CWS, or ES Windows down the line, we quote those side by side on paper so you see the honest difference. Our techs measure every opening twice, and if the pane is not true, the job is not done.
FAQs
That depends on how the roof work is done and who does it. If a roofing crew damages the Therma-Tru flashing, threshold pan, or frame during tear-off and replacement, the manufacturer can deny a claim because the damage wasn’t a product defect. We coordinate the roof work and the Therma-Tru integration so everything stays within the warranty’s installation requirements, and we register both warranty layers in writing before we leave. Call (863) 334-2933 for a free assessment of your current setup before the roofers show up.
We source genuine Therma-Tru parts for hardware, thresholds, and slab replacements. Therma-Tru doesn’t sell direct to homeowners, and some aftermarket parts don’t time correctly with the multi-point locks on Benchmark and Fiber-Classic lines. We’ve installed enough of both to know when a quality aftermarket seal is fine and when you need the OEM hinge or keeper plate. The quote tells you which is which, so there’s no guesswork.
If your Therma-Tru door is over twelve years old and shows stress cracks at the top rail, a hoarse weatherstrip, or a threshold that’s seen water, doing both at once usually saves money. The roofers are already on the property, the scaffolding or ladders are up, and we can set the new door and rebuild the pan while the roof’s being flashed properly. It also means the whole opening gets one continuous water-management system instead of two crews working around each other. Call (863) 334-2933 and we’ll tell you straight whether your door has life left or it’s time.
Most full roof replacements take five to nine working days once materials are delivered. If the Therma-Tru work is limited to a door reset, threshold pan rebuild, or multi-point lock alignment, that’s usually a single-visit job that happens the same day as the roof work where scheduling allows. Hollywood’s wet season adds weather delays, but we don’t leave a torn-off roof uncovered overnight without a plan. Call (863) 334-2933 and we’ll give you a realistic timeline based on your address and the current forecast, not a generic promise.
Yes. Hollywood requires permits for roof replacement and for structural door work, and we pull them, schedule the inspections, and make sure the job passes on the first visit wherever possible. We’ve done enough Hollywood permit inspections to know what the city’s plan reviewers flag, and we build that into the quote so there are no surprise stop-work orders. The final inspection report goes to you in writing, along with both warranty registrations.
If you own a Therma-Tru door or window and you’re facing roof replacement in Hollywood, don’t let two crews point fingers at each other while water finds the gap. Call (863) 334-2933 and talk to a live person who can schedule your free estimate today. We’ll walk the roof, measure the openings, and give you a written price that holds. No change orders, no fine print, no arguing. Just work done right the first time, backed by a company that’s been here long enough to still be here when you need us.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.