ViewLux Custom & Geometric Windows Nationwide | TruePane Windows & Doors

ViewLux Custom & Geometric Windows in Hollywood: What to Know First

Finding someone who will actually touch a ViewLux custom window in Hollywood, Florida is harder than it should be. We do. We service and replace ViewLux custom, geometric, arched, radius, pentagon, and trapezoid windows throughout South Broward, and most smaller jobs are completed in one visit. You won’t get a price over the phone before we have measured the opening, because a geometric window that is out of square by three-sixteenths of an inch changes the whole job. If you own a ViewLux shaped window that is fogged, binding, leaking, or was never set right to begin with, call (863) 334-2933 and we will come measure it and tell you exactly what you are looking at.

Call (863) 334-2933

This page is for homeowners in Hollywood, Hallandale Beach, Davie, and the surrounding neighborhoods who have a ViewLux product that is failing, or want to add a custom ViewLux piece to a remodel, and don’t want to be told it can’t be fixed or it has to be replaced when it doesn’t. Dale Kessler grew up in the Liberia neighborhood of Hollywood resealing jalousie frames with his father, and he has spent nearly three decades measuring and setting windows in this salt air and this sun. We know how ViewLux windows behave here specifically.

How ViewLux Products Fail - and How We Fix Them

ViewLux makes a solid extruded aluminum product line. But in Hollywood’s climate, every manufacturer’s frame eventually tells you where its weak points are. Here is what we actually see on ViewLux custom and geometric openings in this area.

• Fogged insulated glass units in radius and arch tops. ViewLux arch and eyebrow windows take direct south Florida sun, and the curved IGUs fail at the seal more often than rectangular units from the same line. The cause is usually thermal pumping on the curved edge, which stresses the polyisobutylene seal over time. On a ViewLux 4500 or 6500 series radius unit, the replacement IGU has to be cut from a full-size template, never from field measurements alone. We template every curved lite on the job site before we order glass. That is the difference between a replacement that drops in and one that gets forced, and a forced arch will fog again within two years.
• Binding sashes on oversized custom sliders and fixed geometric frames. When a ViewLux custom window binds, the homeowner usually assumes the house settled. Sometimes it has. More often what we find in Hollywood is that the original installer shimmed the frame to square at the time of install, but did not account for the fact that aluminum moves in this heat. A ViewLux fixed trapezoid or oversized rectangle that was set tight with no room for thermal expansion will bow slightly in August, and the sash binds against the frame. The fix is not a new window. The fix is pulling the stops, re-shimming to allow for the movement, and re-bedding the frame. We have done this on ViewLux windows that other contractors told the homeowner to replace entirely.
• Warped or cracked frame corners on geometric units. Pentagon, octagon, and other shaped ViewLux windows concentrate stress at the corners. In coastal Hollywood, the combination of heat cycling and salt-laden air accelerates corrosion at the miter joints on older ViewLux units that did not get a marine finish. We see this most on ViewLux products installed within a mile of the beach in the 1990s and early 2000s. When the corner joint is sound, we repair and refinish. When the extrusion is compromised, replacement is the honest call, and we will show you the corner with a flashlight so you can see it yourself.
• Leaking geometric frames where flashing was never integrated properly. Custom-shaped windows are harder to flash than rectangles, and we regularly see ViewLux geometric installs in Hollywood where the original contractor relied on caulk alone at the head and the joints. Caulk fails. Flashing done right does not. On a ViewLux circle-top or arch, the head flashing has to be cut and lapped in a way that actually sheds water, and the pan flashing at the sill needs an end dam. If your ViewLux shaped window leaks, we will pull the interior trim first, trace the water path, and show you where the failure is before we touch anything from the outside.
• Failed lift mechanisms and roller assemblies on ViewLux casement and awning geometric units. ViewLux casement operators and awning hinges take a beating in Hollywood’s humidity, and when they fail on a custom geometric window, the hardware is not always available as a ViewLux OEM part anymore. We keep a stock of the common operators and can source the rest, but we will always tell you when a quality aftermarket part will outlast the OEM option. That is part of the square deal: you know what you are paying for and why.

Our ViewLux Custom & Geometric Windows Process

Here is how a ViewLux job comes together with us, from the first call to the final wipe-down.

1. 1
   You call, a person answers. Not a voicemail tree. We ask what you are seeing: fogging, binding, leaking, condensation, a draft. We schedule a time that works, and we are there when we say.
2. 2
   We measure everything twice. Rough opening dimensions, the existing frame condition, the glass lite size, the diagonal measurements on a shaped opening. Dale insists on two independent measurements before any order goes out. A geometric window ordered off a single set of numbers is a window that gets sent back.
3. 3
   We diagnose and put it in writing. We show you what is wrong, explain whether repair is viable or replacement is the right answer, and give you a line-item quote on paper. No surprise charges later. If we can fix a fogged arch with a new IGU instead of replacing the whole frame, we tell you that and quote it accordingly.
4. 4
   We decide parts together. OEM ViewLux components when they are available and the clear best option. Quality aftermarket when the OEM part is obsolete, overpriced, or known to fail the same way again. You see the choice and the price difference in writing before anything is ordered.
5. 5
   We do the work and test the result. Setting a custom ViewLux piece means checking square at every corner, not just the four you can see. We shim, bed, seal, flash, and then run a water test on the finished opening. Every job leaves with the warranty paperwork registered before the truck pulls out of the driveway.
6. 6
   We clean up and follow up. The opening is clean, the glass is polished, and the old materials are hauled off. Your invoice shows what we quoted. If anything is not done right, the Done Right Promise means we come back and fix it. No argument, no fine print.

What ViewLux Custom & Geometric Windows Costs in Hollywood

ViewLux custom work is priced by the opening, the shape, and what has actually failed. Here are the ranges we have seen on Hollywood jobs recently.

• Fogged IGU replacement on a ViewLux arch or radius unit: $380-$750 per lite, depending on the glass package and whether the curve requires a custom template and templating is included on shaped glass; this is not an off-the-shelf piece.
• Binding sash re-shim and re-bed on a standard ViewLux custom rectangle: $250-$500, assuming the frame is sound and the hardware is reusable.
• Full replacement of a ViewLux geometric window with a new impact-rated unit: $1,200-$3,200 per opening, with the ceiling on large fixed trapezoids, arches, or custom shapes. Impact glass is mandatory in Hollywood building code for any new or replaced opening, and that requirement affects every quote.
• Frame corner repair and refinish on a coastal ViewLux geometric unit: $300-$600 per corner, if the extrusion is intact and does not need structural replacement.
• Complete tear-out and reinstall of a leaking ViewLux shaped window with new flashing integration: $900-$2,000, including removal, re-flashing, re-setting, and trim.

The price moves when the glass is Low-E impact rated, when the shape requires a full-size template, and when the opening needs scaffolding or a lift instead of a ladder. We give you the number in writing before work starts, and it does not change once we get into the opening. Call (863) 334-2933 for a free estimate. Measure it right, set it square, and the paperwork takes care of itself.

Why Hollywood Homeowners Call TruePane Windows & Doors for ViewLux Work

We are an independent ViewLux service provider, not a factory-authorized dealer. That matters because we are not obligated to sell you a particular line or push replacement when repair is the honest answer. Dale Kessler started this company in 2008 out of a simple frustration: too many out-of-true installs and voided warranties that never should have happened. For many years, the work has run on one rule: if the pane is not true, the job is not done.

Every ViewLux job gets the same standard as any other window: both manufacturer warranty layers registered in writing before our truck leaves your driveway, and our Done Right Promise if anything is not right. Our technicians are background-checked and uniformed, and we also work across PGT, CGI, CWS, and ES Windows, which means if a ViewLux replacement is not the smartest dollar you can spend, we will show you the alternative on paper side by side and let you decide. A live person answers the phone 24 hours a day, 7 days a week, and the person who answers is the same company that will still be here in thirty years.

FAQs