Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Impact Garage Doors: The Hollywood Owner’s Guide
For a ViewLux impact garage door in Hollywood, FL, a full replacement typically runs $2,800 to $5,400 installed, depending on door size, panel count, and whether we’re reusing your existing track or running new. We stock ViewLux-compatible hardware and can get most doors ordered and installed within five to seven business days. Most Hollywood owners discover they need us two ways: a windstorm that finished a weakened door, or a slow failure after years of salt air working on the hardware.
These are impact-rated doors built for a reason. Hollywood sits close enough to the Atlantic that wind-driven debris is a real thing every hurricane season. A ViewLux door that’s lost a panel, delaminated at the bottom, or started binding in the track isn’t just ugly. It’s the weak point in a system you paid good money to make strong.
Which ViewLux Models This Applies To
ViewLux impact garage doors come in a few distinct series, and the part you need depends on which one you have. The most common in Hollywood are the VL-500 mid-range aluminum and the VL-800 heavy-duty line, though we still see original VL-300 doors from early-2000s installs in older neighborhoods like Emerald Hills and Hollywood Lakes.
The best way to identify yours is the metal tag on the upper left of the door panel, inside the garage. It has the series code and the panel stamp number. If that tag’s missing or faded past reading, measure the thickness of a panel edge. VL-500 panels run 1-3/8 inches thick. VL-800 panels run 2 inches. That’s the difference between a door rated for 130 mph and one rated for 170 mph, so it matters.
On the OEM-versus-aftermarket question: for ViewLux specifically, we recommend OEM panels and OEM bottom seals. The panel profiles are proprietary, and an aftermarket panel from a generic supplier won’t seat against the original hinge system the same way. Hardware like rollers, springs, and cables can be quality aftermarket without any downside, as long as the spring is wound to match the door’s weight. TruePane is an independent service provider, not affiliated with ViewLux. We know these doors because Hollywood has a lot of them, and we’ve been taking them apart and putting them back together for years.
One compatibility gotcha worth knowing: ViewLux changed their hinge spacing between the VL-500’s first and second production runs. If your door was installed before 2012, measure the center-to-center space between hinge bolt holes before ordering anything. If you don’t, you’ll have a panel that doesn’t line up, and you’ll be calling us anyway.
Signs Your ViewLux Impact Garage Doors Is Failing
- Delamination at the bottom panel. Salt air from the Atlantic gets into the panel edge, the aluminum starts to separate from the core, and the bottom three inches bulge. This is the most common failure we see in East Hollywood and along the Intracoastal.
- Binding or scraping when the door moves. Usually means a roller has gone flat-sided or a track has shifted out of plumb. Often a sign the tension is off, and the door is pulling unevenly.
- A diagonal crack in the polycarbonate or glass insert. ViewLux doors with glazing lite panels crack when the frame flexes under pressure. Even a hairline crack means the panel has lost its impact rating.
- Rust powder at the hinge points. Factory hinges are galvanized, but years of Hollywood humidity and salt will win eventually. Pinhole rust at a hinge is manageable. Rust at the spring anchor bracket is not.
- The door won’t stay aligned when closed. If one side sits a quarter-inch off the ground and the other doesn’t, you have either a sagging panel or a failing cable drum. Either way, it’s not just cosmetic, and it will get worse in a storm.
Replacement Cost & What’s Included
Here’s the honest picture for Hollywood. A single 8×7 VL-500 replacement panel is usually $480 to $720 installed. A full 16×7 two-car door in the VL-800 series runs $3,200 to $5,400, depending on whether you have insulation, glazing panels, or an opener we need to recalibrate. We don’t quote over the phone. We measure, and then the price is in writing before we order anything.
Every ViewLux job we do includes the panel or door, new nylon rollers where the old ones are worn, all new bottom seal, and a spring tension check. If your spring is more than seven years old and showing rust, we’ll tell you up front. It’s cheaper to replace it while we’re there than to have it snap in February when you’re late for work.
The workmanship is covered by our Done Right Promise. If it’s not right, we come back and fix it. No arguing, no fine print. Both warranty layers get registered in writing before the truck leaves your driveway. That’s The Keystone Standard, and we’ve never made an exception for a garage door.
DIY or Call Us?
Some things you can safely check yourself. Look at the rollers. Look at the bottom seal. Listen for grinding. Those are diagnostic, and knowing what you’re seeing makes the phone call shorter.
What you should not do is touch the spring assembly. The tension on a ViewLux door spring is enough to take a finger off. That’s not a warning from a company trying to scare you into a service call. It’s a fact of working with coiled steel under load. If the issue is a spring, a cable drum, or a panel that’s separated from the hinge rail, let a trained tech handle it. Dale Kessler has watched too many homeowners try to save $200 and spend the savings at urgent care.
If the panel is delaminating or the door is binding, call (863) 334-2933. We’ll tell you what we think over the phone, and if it needs a set of eyes on it, we’ll come look. The estimate is free.
FAQs
In Hollywood’s salt air and humidity, expect 12 to 18 years from a ViewLux door before the bottom panel shows delamination or the hardware is too far gone to be worth repairing. Doors with regular washing and a spring service every five to seven years trend toward the long end of that range. Call (863) 334-2933 and we’ll tell you honestly whether your door has years left or months.
Minor surface scratches and small dents can sometimes be stabilized, but a delaminated or cracked ViewLux panel is a replace, not a repair. The impact rating is structural, and once the aluminum separates from the core, no amount of sealant brings the rating back. We’ll always tell you if a repair is viable before recommending replacement. Call (863) 334-2933 for an honest assessment.
Most single-panel replacements take two to three hours from arrival to cleanup. A full two-car door replacement, including track and spring work, is usually a one-day job. We carry the common ViewLux-compatible hardware on the truck, so we don’t leave for a parts run while your garage is open.
We stock the hardware: rollers, hinges, bottom seals, spring assemblies, and emergency release mechanisms common to ViewLux doors. Panels are ordered per job because the series and stamp number have to match, which usually takes five to seven days. We also keep parts for PGT, CGI, and CWS impact doors on hand, so if you call with one of those, we’re likely ready the same week. Call (863) 334-2933 and we’ll check stock while you’re on the phone.
If your ViewLux impact garage door is failing or you just want a straight answer about what it will cost to fix, call (863) 334-2933. We’ll give you a real number for Hollywood, registered warranties in writing, and work done right the first time. Measure it right, set it square, and the paperwork takes care of itself.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hollywood and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.