Awning Windows

Awning Windows in Hollywood, FL | TruePane Windows & Doors

Awning windows are the top-hinged, crank-out workhorses of Florida coastal architecture. You crack them open during an afternoon downpour, and the angled glass sheds rain away from the opening while still letting the breeze move through. That’s why Hollywood homeowners keep asking us for them, especially for kitchens, bathrooms, and anywhere a window sits low on the wall. At TruePane Windows & Doors, we install impact-rated awning windows across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines, all set level, plumb, and square per AAMA 2400/2410 practice. Call (863) 334-2933 to talk through your project in Hollywood.

Call (863) 334-2933

Product Overview - Awning Windows

An awning window hinges at the top and cranks outward from the bottom, which does two things that matter a lot in Hollywood. First, rain hits the glass and slides off instead of blowing into the house, so you can ventilate during a passing summer storm without thinking twice. Second, the crank mechanism pulls the sash tight against the weatherstripping at multiple points around the perimeter, which creates a compression seal that sliding windows simply cannot match. That seal becomes critical in wind-driven rain conditions along the Hollywood coast.

For hurricane-prone construction, the Impact Series pairs that top-hinged geometry with laminated impact glass in a weathertight frame. The glass carries a PVB interlayer that holds the pane together under impact, and the frame is engineered for design pressures matched to your specific Hollywood wind zone. We regularly install awning windows in a stacked configuration above fixed picture windows, in bathrooms above tubs, and in kitchens where a counter makes a crank the most practical operator. The low-profile hardware doesn’t fight with window treatments, and the outward swing frees up interior sill space. It’s a practical profile with a clean look that suits the mix of mid-century ranches and newer coastal builds you see across Hollywood neighborhoods like Emerald Hills, Hollywood Lakes, and Lakes of Emerald Hills.

Technical Specifications

Every awning window order starts with the configuration. Frame material, glass package, finish, and screen style all get matched to the elevation and the exposure. Here’s what we spec on the Impact Series:

• Frame materials: Aluminum or vinyl, both engineered for HVHZ wind loads.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass.
• Finish options: White, almond, bronze, black, and tan, available on the aluminum lines; finish options vary slightly by manufacturer.
• Screen options: Fixed screen or retractable screen, selected by how much you operate the window.
• Design pressure: Matched to your Hollywood wind zone, up to +/-100. We never spec higher than your zone requires, because paying for an overbuilt rating is wasted money.
• Compliance documents: Miami-Dade NOA and Florida Product Approval numbers available per configuration, issued for the exact size and glass package you order.

Hurricane & Compliance Performance

Laminated Impact Glass - The glass is two panes bonded with a PVB interlayer. Under a large-missile impact, the glass may crack, but the interlayer holds the pane in the frame. That means no breach, no pressurization, and no rain blowing through your window after a storm hits in Hollywood.

Miami-Dade NOA / Florida Product Approval - Every configuration carries either a Miami-Dade Notice of Acceptance or a Florida Product Approval number, issued per configuration. These are the documents your Hollywood building department will look for in the permit package. We verify the specific number on your quote before submittal.

FBC / HVHZ Compliance - The Impact Series awning windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ governs Hollywood and most of the southeast coast, and the engineering requirements are stricter here than anywhere else in the state.

TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, typically with a timber 2×4 fired at the glass. TAS 202 covers cyclic wind-pressure loading, which simulates the repeated gusts of a passing storm. TAS 203 covers forced-entry resistance, which matters for ground-floor and accessible windows in Hollywood.

Design Pressure for Your Wind Zone - Design pressures are matched to your Hollywood wind zone, up to +/-100. The specific DP your home requires depends on elevation, proximity to the coast, and the window’s position on the structure. We calculate that per opening rather than applying a blanket rating.

Energy Performance - Low-E and insulated glass options are available on the Impact Series. Low-E coatings reduce solar heat gain through the glass, which matters for west-facing elevations in Hollywood. Insulated glass adds a thermal break that helps keep conditioned air inside during the long cooling season.

Color & Glass Options

Finish selection in Hollywood tends to split along architectural lines. The older mid-century homes in Hollywood Hills and the Lakes area often look best with bronze or tan frames that sit quietly against the surrounding stucco. The coastal contemporary builds closer to Hollywood Beach and along the Intracoastal lean toward white or black for contrast, especially with clean interior trim lines. Almond is the quiet, warm neutral that splits the difference. All five finishes - white, almond, bronze, black, and tan - are available on the aluminum Impact Series lines we install, and we’ll show you physical samples rather than asking you to pick from a catalog scan.

On glass, clear laminated impact glass is the straight-ahead choice when you want maximum visible light and don’t have a serious solar gain problem. Tinted glass cuts glare and heat on south and west exposures, which Hollywood has plenty of. Low-E insulated glass delivers the best all-around energy performance and is worth the upcharge on any elevation that gets direct afternoon sun. We’ll walk through the trade-offs by window, not by the whole house, so you can mix glass packages where it makes sense.

Installation by TruePane Windows & Doors in Hollywood

An impact window is only as strong as the perimeter holding it in the wall. The NOA-rated assembly assumes a proper installation, and Hollywood’s permitting process enforces that assumption. Here’s how we run every awning window job in Hollywood.

We start with a pre-install inspection of each opening: condition of the rough opening, existing flashing, water intrusion history, and alignment of the structure. Then an opening-by-opening measurement that feeds back into the order, because an awning window cut to the wrong size cannot be shimmed into compliance. Installation follows AAMA 2400/2410 practice, with each window set level, plumb, and square. We seal the perimeter with AAMA 812 low-expansion foam, which fills the gap, reduces air leakage, and allows the wall to drain without wicking water behind the frame. Then we complete the exterior flashing and run a flood test on the wall to verify the seal exists before we caulk and trim the interior.

In Hollywood, the specifics matter. Coastal exposure accelerates salt corrosion, so we’re particular about the fasteners and sealants we use on homes within a few blocks of the water. Wind zone calculations vary by address, even within the same neighborhood, and we use the correct design pressure rating per opening rather than overselling a rating you don’t need. Permitting in Broward County requires product approval documentation for every window on the permit submittal, and we handle the paperwork for you, including the NOA or Florida Product Approval numbers specific to the configurements we install. Improper installation compromises the entire rated assembly: a window installed out of square will bind at the crank, a perimeter not sealed will leak under wind pressure, and a unit without the correct flashing will hold water behind the wall. We do it once, correctly.

Frequently Asked Questions - Awning Windows

Get a Quote - Awning Windows in Hollywood

If you’re building in Hollywood or replacing windows in an existing home, start with a measurement and a conversation. We’ll review wind zones, glass packages, color options, and what your permit package will require, with line-item pricing. Call (863) 334-2933 to schedule your free on-site estimate with TruePane Windows & Doors.

Written by the team at TruePane Windows & Doors, serving Hollywood, FL with hurricane-impact windows and doors.