Geometric & Shaped Windows

Geometric & Shaped Windows in Hollywood, FL | TruePane Windows & Doors

Geometric and shaped windows turn an ordinary wall into the reason people slow down in front of your house. We’re talking triangles, hexagons, octagons, arched tops, radius corners, and fully custom curves, all fabricated with hurricane-impact glass that meets Florida’s strictest wind-zone codes. TruePane Windows & Doors has installed these architectural windows across Hollywood, FL for years, and we know what this coastline demands. If you’re planning a new build, a remodel, or replacing a failed unit, call us at (863) 334-2933 to start the conversation about your opening, your design, and your permit requirements.

Call (863) 334-2933

Product Overview - Geometric & Shaped Windows

A square window is a square window. A shaped window is a decision. In Hollywood, FL, where Mediterranean revival, coastal contemporary, and mid-century homes all compete for curb appeal, angled and curved glass does work that no rectangular sash can. These units are custom-fabricated to your exact rough opening, whether that’s a fixed triangular accent over a gable, a hexagonal focal point in a stairwell, or a radius-top transom above a front door.

Why does geometry matter so much in hurricane country? Because every corner, every seam, and every degree of angle changes the load path of wind pressure. A poorly fabricated shaped window in a coastal wind zone is a funnel for water and a hinge for debris. That’s why we only sell these configurations through impact-rated fabrication lines: PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass. The glass is laminated, the frame is engineered, and the entire assembly is designed to keep its shape when the wind tries to reshape it.

What sets these windows apart is restraint with strength. You get the architectural detail you actually want, no false mullions or faux grids pretending to be something they’re not. You get real custom geometry, real structural aluminum or vinyl, and real compliance documentation. TruePane Windows & Doors has built our Hollywood, FL reputation on installs like these: the hexagonal window in Emerald Hills, the arched transom row in Hollywood Lakes, the triangular gable units in North Beach. Each one measured, ordered, and set to the millimeter.

We don’t push a generic product lineup. We talk through where the window sits in the wall, what direction it faces, what the interior sightline will be, and what the wind zone dictates. Then we spec the exact configuration that meets all of it. If you have an odd opening or a design you’ve been sketching on a napkin, call (863) 334-2933. That’s what we do.

Technical Specifications

• Frame materials: Extruded aluminum or vinyl, selected by location, exposure, and finish preference. Aluminum for strength in large or complex geometries; vinyl for thermal performance and coastal salt-air resilience.
• Maximum size: Custom fabricated to order. There’s no standard cap. We work from field measurements and drawings, not stock sizes.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, and clear glass. Mix and match by elevation and energy needs.
• Color and finish options: White, almond, bronze, black, and tan. Each available across the fabrication lines we carry, matched to your existing or planned exterior palette.
• Configuration styles: Fixed and operable units available depending on geometry. Triangular, hexagonal, octagonal, arched, radius, trapezoid, parallelogram, and custom CAD-driven shapes.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers issued per configuration, verified on your specific quote.
• Design pressure: Matched to your wind zone, up to +/-100, never higher.

Hurricane & Compliance Performance

Laminated Impact Glass
The glass in every TruePane Windows & Doors geometric unit carries a PVB (polyvinyl butyral) interlayer. Under impact, that layer holds the glass in the frame rather than letting it shatter inward. The outer pane may crack. The window does not open up. That’s the entire point in a storm.

Miami-Dade NOA / Florida Product Approval
Each Geometric & Shaped Windows configuration we sell is documented with a Miami-Dade Notice of Acceptance and Florida Product Approval number. These aren’t blanket certificates; they’re issued per configuration. When you get your quote, we’ll list the exact approval numbers your permit package needs.

FBC / HVHZ Compliance
Every window we install in Hollywood, FL is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ isn’t a suggestion. It’s the standard for Broward County, and it governs how the frame, glass, and anchoring system work together as one assembly.

TAS 201 / TAS 202 / TAS 203 Testing Context
The HVHZ rating comes from a defined protocol family. TAS 201 covers large-missile impact. TAS 202 covers cyclic wind-pressure loading. TAS 203 covers forced-entry resistance. These are the tests our product configurations are built and rated under. We reference them because your building official will.

Design Pressure Matched to Your Wind Zone
We don’t sell you more window than your house needs. Design pressures are matched to your wind zone, up to +/-100, never higher. A window on the leeward side of a single-story home in Hollywood, FL doesn’t need the same rating as a third-floor oceanfront gable. We spec accordingly. You get code compliance without paying for overkill.

Energy Performance Options
Laminated impact glass handles the storm. Low-E coatings and insulated glass handle the sun. In Hollywood, FL, afternoon heat loads drive cooling bills. If your geometric window faces west or south, we’ll recommend Low-E insulated glass for that elevation. Same storm rating, better daily comfort.

Color & Glass Options

Hollywood, FL architecture splits into a few clear camps. The older beachside cottages and Mediterranean-inspired homes lean toward white, almond, and tan frames that recede into stucco and barrel tile. The newer coastal-modern and Key West style homes often run bronze or black for contrast against light exteriors. We keep all five finishes, white, almond, bronze, black, and tan, available across our fabrication lines so the window frame doesn’t fight the rest of the house.

Glass selection follows the room, not just the code. Clear laminated impact glass is the most common choice when the view matters most and the window faces shaded or northern light. Tinted glass cuts glare on east and west elevations, a real consideration for Hollywood, FL sun angles. Low-E insulated glass brings year-round energy performance without changing the look of the window, the coating is nearly invisible. We’ll walk you through which combo makes sense for each opening during the estimate.

Installation by TruePane Windows & Doors in Hollywood

A hurricane-rated geometric window installed badly is just a hole with paperwork. The NOA and Florida Product Approval assume the product is installed exactly as the tested assembly requires. Anchor pattern, perimeter seal, shimming, flashing sequence. Every one of those details either preserves the rating or voids it in practice. We install per AAMA 2400/2410 practice, and we’re relentless about level, plumb, and square. On weird geometry, that’s harder than it sounds.

Our process starts before the window is ordered. We inspect the rough opening, check the framing for moisture or rot, verify the dimensions in three places, and discuss the permit path with you. In Hollywood, FL, HVHZ jurisdiction means the building department will want to see your NOA numbers and installation details. We’ve been through that process hundreds of times. We know what the reviewers look for.

On install day, we set the window plumb and level, shim at every anchor point, and run low-expansion AAMA 812 foam around the full perimeter. That seal matters in Hollywood, FL, where afternoon downpours and salt air are relentless. Then we flash the exterior, seal the interior, run a final water test, and clean up the site completely. The window is square, the opening is dry, and the permit package is ready for inspection.

Improper installation compromises an NOA-rated system. That’s not marketing language; it’s structural reality. A window that’s racked in the opening won’t drain. A perimeter seal that’s skipped will leak. A frame that’s out of square binds the sash and stresses the glass. We’d rather tell you the opening needs reframing than install expensive glass into bad structure. That’s the kind of honesty that keeps our Hollywood, FL customers calling us back for the next project.

Frequently Asked Questions - Geometric & Shaped Windows

What wind zone and design pressure are Geometric & Shaped Windows rated for?
We match design pressure to your specific wind zone, up to +/-100, and never higher. Hollywood, FL sits in a High-Velocity Hurricane Zone, so most openings fall between +/-60 and +/-100 depending on exposure, height, and location. Your quote will list the exact design pressure rating for each window, backed by Miami-Dade NOA and Florida Product Approval numbers for that configuration. Call (863) 334-2933 for a site-specific answer.

What is the lead time for a custom geometric window?
Most Geometric & Shaped Windows fabricate in four to six weeks from final approved shop drawings, though unusual shapes or finish combinations can run longer. Once we measure your opening and lock the drawings, we give you a firm date. The fastest way to get a real timeline is to call (863) 334-2933 and schedule the on-site measurement.

Does my Hollywood, FL permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes. Broward County and the City of Hollywood build under HVHZ rules, and your permit package will need the Miami-Dade NOA and Florida Product Approval numbers for each window configuration. We supply the documentation with your quote and again with your permit submittal. Your building official reviews those numbers against the tested assembly. We make sure they match.

Can I customize the size or configuration of a shaped window?
That’s the entire point of this product. Triangular, hexagonal, octagonal, arched, radius, and fully custom CAD-driven shapes are fabricated to your opening, not forced into stock molds. We work from field measurements and your design intent, then produce shop drawings for approval before anything goes into production. If you have a sketch, a photo, or just an odd hole in your wall, call (863) 334-2933 and we’ll take it from there.

How do I maintain the frame on a geometric window?
Rinse the frame and glass with fresh water every month or two, especially if you’re within a few blocks of the Intracoastal or ocean in Hollywood, FL. Salt film builds up and eats at finishes over time. Use a soft brush on the frame corners and weep holes. Check the perimeter sealant once a year for cracks or separation. The good news: these frames are designed for decades, not seasons. The maintenance is simple, and we’ll show you exactly what to watch for after we install.

Get a Quote - Geometric & Shaped Windows in Hollywood

If you’ve got a shaped opening, an architectural sketch, or just a vague idea that a hexagon would look incredible over your entry, we’ll help you spec it, price it, permit it, and install it. Call TruePane Windows & Doors at (863) 334-2933 to schedule your free on-site measurement in Hollywood, FL. We walk the opening, check the wind zone, and give you a written line-item quote. No pressure, just numbers.

Written by the team at TruePane Windows & Doors, serving Hollywood, FL since day one.