3-Panel Sliding (3-Lite Roller) Windows

3-Panel Sliding (3-Lite Roller) Windows in Hollywood, FL | TruePane Windows & Doors

A 3-panel sliding window, sometimes called a 3-lite roller, gives you a wide, uninterrupted view with the strength to stand up to a South Florida hurricane season. It’s a horizontal configuration built for openings where a standard two-panel window won’t do: three lites on smooth roller tracks, with laminated impact glass across every panel. We install these systems in Hollywood homes from Emerald Hills to Hollywood Lakes, and we’ve seen how well they perform when the wind picks up. If you’re planning a remodel, a coastal retrofit, or new construction that needs a wide opening plus HVHZ-rated protection, this is the window profile worth a close look. Call TruePane Windows & Doors at (863) 334-2933 to talk through your opening size and get a free estimate.

Call (863) 334-2933

Product Overview - 3-Panel Sliding (3-Lite Roller) Windows

A 3-panel sliding window solves a specific architectural problem: you want daylight, you want airflow, and you need impact protection, but the opening is too wide for a standard slider. The three-lite roller configuration spans those wider rough openings while keeping the frame geometry strong enough for hurricane wind loads. In Hollywood, where mid-century ranch homes and newer coastal builds both call for wide sightlines, this profile fits naturally in living rooms, primary bedrooms, and Florida rooms.

The configuration choices matter. You can order a 3-lite setup with two fixed panels and one operable panel, which maximizes glass area and is our most common recommendation for wide openings. Or you can go with one fixed panel and two operable panels, which trades a little glass for more cross-ventilation. Either way, every lite carries laminated impact glass with a PVB interlayer. That’s the engineering that holds the glass in the frame under impact instead of letting it shatter into the room.

The frames come in extruded aluminum or vinyl. Aluminum gives you thinner sightlines and a more contemporary profile, and it’s what we see most often on Hollywood’s waterfront properties. Vinyl brings strong thermal performance and a softer look that suits older Florida homes. Both frame materials run on smooth roller tracks, so operating the panels feels light even on oversized lites. TruePane Windows & Doors has installed this exact product profile in Hollywood for years, across build types and wind zones, and we order each unit to the specific design pressure your structure calls for.

Technical Specifications

• Frame materials: Extruded aluminum or multi-chamber vinyl.
• Track configurations: 3-Lite (2 Fixed + 1 Operable) or 3-Lite (1 Fixed + 2 Operable).
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass.
• Finish options: White, Almond, Bronze, Black, Tan.
• Screen options: Retractable screen or sliding screen.
• Design pressure: Matched to your Hollywood wind zone, up to +/-100, never higher.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to FBC High-Velocity Hurricane Zone requirements.

Hurricane & Compliance Performance

Laminated Impact Glass
Every lite in this window carries laminated glass with a PVB (polyvinyl butyral) interlayer. Under impact, the glass cracks but stays bonded to the interlayer and held in the frame. That keeps wind, water, and debris on the outside where they belong. Call us at (863) 334-2933 to see sample glass in person.

Miami-Dade NOA / Florida Product Approval
Each configuration we quote carries its own Miami-Dade Notice of Acceptance and Florida Product Approval numbers. We verify the specific approval on your written quote so your Hollywood permit submittal moves without a compliance gap.

FBC / HVHZ Compliance
This window is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. For Hollywood homeowners, that means the unit is designed for the wind and debris conditions specific to Broward County’s coastal and near-coastal zones.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated impact products are tested under the TAS protocol family: TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. The 3-panel slider earns its approval through that test sequence.

Design Pressure Matched to Your Wind Zone
We order every 3-panel sliding unit to the design pressure of your specific Hollywood wind zone, up to +/-100, and never higher than the opening actually requires. Over-engineering a unit past its tested range is not a benefit; matching it correctly is what keeps the system compliant.

Energy Performance Options
Low-E and insulated glass options let you pair impact protection with better thermal performance. That matters a lot in Hollywood, where afternoon sun on western-facing sliders can make a room noticeably warmer.

Color & Glass Options

Finish selection is where the window starts to feel like it belongs on your house. White and Almond are the workhorses, especially on Hollywood’s older concrete-block homes where a clean, bright frame reads as classic Florida. Bronze and Black have become the go-to choices for modern and transitional builds in Hollywood Lakes and along the Intracoastal, where darker frames give the glass a sharper, more architectural look. Tan works well on homes with warmer stucco tones, blending the frame into the exterior instead of making it a contrast point.

Glass choice depends on what the room needs. Clear laminated impact glass keeps the view neutral and is the standard starting point. Tinted glass cuts glare, which matters on south and west exposures. Low-E insulated glass is worth considering when the same window is doing double duty on both impact protection and cooling-load reduction. Every glass option remains impact-rated, so the choice is about comfort and light, not protection level.

Installation by TruePane Windows & Doors in Hollywood

The way a 3-panel sliding window is installed determines whether it performs like the NOA-rated product it is or becomes a liability. We’ve repaired enough improperly set windows in Hollywood to say this plainly: a good window set badly is still a leak waiting to happen. That’s why our installation process is built around the same discipline as the product itself.

Every project starts with a pre-install inspection of the rough opening. We check the existing framing for rot or movement, verify the opening dimensions against the ordered unit, and review the wind zone requirements for your specific Hollywood structure. Then we set the frame level, plumb, and square, which on a three-panel unit is non-negotiable: if the frame is racked even slightly, the roller panels bind and the seals never sit right.

We follow AAMA 2400 and AAMA 2410 installation practice, including an AAMA 812 low-expansion foam perimeter sealant around the frame. After the unit is set and anchored, we run a water test on the install, recheck operation of the operable panel, and confirm the screen seats properly. We also stay current on permitting requirements in Hollywood and Broward County’s HVHZ jurisdictions, so your permit submittal includes the correct NOA or Florida Product Approval documentation for the exact configuration we installed. Coastal exposure in Hollywood means salt air, wind-driven rain, and inspection scrutiny. We install for all three.

Frequently Asked Questions - 3-Panel Sliding (3-Lite Roller) Windows

Get a Quote - 3-Panel Sliding (3-Lite Roller) Windows in Hollywood

You’ve got the details. Now we bring the tape measure. Call TruePane Windows & Doors at (863) 334-2933 to schedule a free on-site measurement in Hollywood, and we’ll quote your exact window configuration with the correct design pressure, the right glass package, and the NOA or Florida Product Approval submittal you’ll need for permit. Written line-item quotes, no surprises, installed by a team that sets HVHZ windows the right way, every time.

Written by the team at TruePane Windows & Doors, serving Hollywood, FL with impact window and door installations.