Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across North Miami Beach
Custom window and door work in North Miami Beach is not a generic glass job. It is a wind-load calculation, a salt-air materials decision, and a permit-triggered code compliance exercise wrapped into one. TruePane Windows & Doors has been handling all three for North Miami Beach homeowners for years, and we answer the phone when you call: (863) 334-2933. Every opening on your house has to meet Miami-Dade High Velocity Hurricane Zone standards, and every install has to survive the Intracoastal’s salt spray without corroding in half a decade. That is the whole job, and we do it the way it should be done: measured twice, quoted on paper, and installed so the pane is true when we leave.

If you are in Skylake or Biscayne Gardens and staring at original jalousie windows that leak wind and rust at the clips, you are not looking at a simple swap. You are looking at a full-opening replacement with Miami-Dade NOA-approved impact units. We will walk you through exactly what that means, what it costs in North Miami Beach, and we will put every manufacturer warranty registration in writing before our truck leaves your driveway.
Call (863) 334-2933 for a free estimate. A live person answers.
Why TruePane Windows & Doors Is North Miami Beach’s Preferred Custom Windows & Doors Company
North Miami Beach homeowners call us because we understand what this city puts a window through. The entire city sits inside the HVHZ, the most demanding wind-load jurisdiction in the country. A custom window that passes code in Hollywood or Hallandale Beach may not pass in North Miami Beach. We do not guess at this. We pull the Miami-Dade Notice of Acceptance for every product we specify, and we hand you the paperwork. No verbal reassurances. Documents.
Our technicians work in uniform, they are background-checked, and they measure every opening twice. That second measurement catches the settling, the out-of-square jambs, and the salt-pitted tracks that a rushed quote misses. We have been doing this work long enough to know that a 1950s CBS ranch in Skylake does not have a single perfectly square rough opening. The framing settled before the original owner paid off the mortgage. We plane, shim, flash, and set each unit so it closes square and seals tight, because if the pane is not true, the job is not done.
Dale Kessler founded TruePane in 2008 on a simple rule that still governs every install: if the pane is not true, the job is not done. That is the standard we bring to every North Miami Beach home, from Biscayne Gardens to Skylake and every block in between.
Our Custom Windows & Doors Services in North Miami Beach
Custom Shape Windows
North Miami Beach’s CBS ranch homes have architectural quirks: eyebrow arches over entry doors, trapezoid transoms, odd-radius half-rounds. Off-the-shelf stock windows will not fit these openings without ugly infill panels and sloppy trim. Our custom shape windows are ordered to the exact arc, angle, and radius of your existing rough opening, factory-glazed in Miami-Dade NOA-approved impact glass, and set so the daylight opening matches the original design. In neighborhoods like Biscayne Gardens, where a 1960s front elevation often pairs a round gable vent with a rectangular picture window, the right shape matters. We cut the opening, order the unit, and install it plumb, level, and square.

Oversized Glass Panels
North Miami Beach homes built for cross-ventilation often have massive fixed glass walls facing the Intracoastal breeze, and that glass has to hold against 170-plus mph wind loads. We specify oversized impact panels with laminated glass and heavy-gauge fusion-welded frames, and we size the structural mullions to carry the load. The salt air here means we upgrade hardware to stainless steel on every oversized install. Standard zinc-plated hardware pits and seizes within five years this close to the water. Our quotes reflect that upgrade up front, not as a surprise change order later.

Architectural Grilles & SDLs
Simulated divided lites, or SDLs, are the traditional look: exterior raised grilles, interior flat bars, and a shadow bar that makes the sash read like true divided light from the street. North Miami Beach homeowners who want to preserve a 1960s ranch aesthetic without sacrificing impact performance choose SDLs. We match the sightline widths to the original muntin pattern, so your new impact windows do not look like modern replacement units. On a Skylake home with original jalousie windows, the upgrade to a fixed picture window with an SDL pattern and a pair of flanking single-hungs completely changes the curb appeal, and every unit carries the required Miami-Dade NOA.

Commercial Storefront Glazing
North Miami Beach’s commercial corridors, including the storefronts along NE 163rd Street and West Dixie Highway, need storefront glass that meets HVHZ impact requirements and holds up to daily salt exposure. We install and replace aluminum storefront systems with impact-rated laminated glass, stainless steel hardware, and properly sealed perimeter joints. We work around business hours when the job requires it, and we coordinate with your landlord on access. A fogged or cracked storefront lite on a heavily traveled street is not just an eyesore; it is a code issue and a security gap. We get it addressed correctly the first time, with the NOA paperwork delivered to the property owner.

Curtain Wall Systems
For commercial and multifamily buildings in North Miami Beach, a curtain wall is a substantial engineering commitment. The system has to carry wind loads across large spans, resist water infiltration during hurricane-driven rain, and maintain its structure in a salt-laden environment. We specify curtain wall systems with thermal breaks, stainless steel anchors, and impact-rated glazing, and we coordinate structural design with the manufacturer’s engineering team before the first anchor is set. This is not a job where you want someone figuring it out on site. We plan the details, order the materials, and sequence the install so your building stays watertight at every step.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Miami Beach
We are an authorized installer for more than a dozen manufacturer lines, and for North Miami Beach customers we most often quote impact-rated product lines. Each of those manufacturers produces Miami-Dade NOA-approved units that handle HVHZ wind and water design pressures, and each has different strengths: Marvin leads on architectural aesthetics and SDL options, Simonton is a solid mid-range impact line with strong warranty coverage, and Jeld-Wen offers a broad range of frame materials and finishes. We quote manufacturer lines side by side on paper, so you see exactly what you are buying, what it costs, and what each warranty covers in writing. No one tries to steer you toward whatever has the highest margin. We show you the numbers and let the product earn the job.
Common Custom Windows & Doors Problems We See in North Miami Beach Homes
- Salt-corroded aluminum frames and door tracks: Homes within a mile or two of the Intracoastal Waterway in North Miami Beach absorb constant salt spray. Aluminum window frames and sliding door tracks pit and seize within five to ten years. The sliding glass panel starts to drag, the lock mechanism binds, and eventually the door will not move without shoulder force. The fix is not lubrication; it is replacement with fusion-welded frames and stainless steel hardware, specified for a marine environment.
- Original jalousie windows with snapped clips and wind-driven rain leaks: The 1950s CBS ranch homes in Skylake and Biscayne Gardens were built with jalousie, or louvered, windows on three or four sides of the house. Those units cannot be retrofitted to meet impact standards. The clips break, the glass louvers rattle, and wind-driven rain rides through the gaps into the wall cavity. Any permitted window work on these homes triggers a full replacement with Miami-Dade NOA-approved impact units. There is no partial fix.
- Fogged insulated glass units (IGUs) after only seven to ten years: Inland, a properly manufactured IGU should hold its seal for fifteen to twenty years. In North Miami Beach, the combination of salt air, high UV exposure, and daily thermal cycling stresses the sealant and desiccant faster. A fogged unit means the seal has failed and the inert gas has escaped. We replace the IGU or the entire sash, depending on the frame condition, and we register the new manufacturer warranty in writing.
- Out-of-square rough openings from settled CBS block: Concrete block homes settle, and a 1950s ranch in North Miami Beach has had seventy years to do it. The rough opening that was square when Eisenhower was president is now a parallelogram. A stock window forced into that opening will bind, leak, and fail early. We measure every opening twice and order units sized to the actual rough opening, then shim and flash correctly so the finished window operates smoothly and seals tight.
Pricing for Custom Windows & Doors in North Miami Beach, FL
A typical custom impact window replacement in North Miami Beach runs $1,100 to $2,800 per opening, installed. A custom shaped window, such as an eyebrow arch or a half-round, adds $400 to $1,200 over a rectangular unit of equivalent area. Oversized impact glass panels run $2,500 to $6,000+ depending on square footage and structural mullion requirements. Architectural grilles and SDLs add $150 to $450 per sash on most product lines.
The coastal-spec upgrade for a standard window typically adds 15 to 22 percent to the base unit price. That covers stainless steel hardware, upgraded frame finishes rated for a marine environment, and fusion-welded frame construction instead of mechanically fastened. An inland-spec window that is not specified for salt exposure will show frame pitting, hardware corrosion, and seal failure within five to ten years in North Miami Beach. The coastal-spec unit costs more on the front end and costs less within a decade because you are not paying for a second replacement and the labor to pull the first one. We quote both specs side by side, on paper, with the exact dollar difference, so you make the call with the numbers in front of you. Call (863) 334-2933 for a free written line-item estimate. The number on the page is the number on the proposal.
We Also Serve Cities Near North Miami Beach
Our crews serve North Miami Beach and the surrounding South Florida corridor. We work regularly in Hollywood, Miami Gardens, and Fort Lauderdale, handling custom window and door replacements, impact upgrades, and storefront glazing. If you are in one of those cities and want a real quote on paper from someone who understands coastal wind loads and salt-air corrosion, call us at (863) 334-2933. We will tell you the truth about what the job needs and what it costs, no matter which side of the county line you live on.
Serving North Miami Beach, FL - Our Local Coverage Area
We’re based in the North Miami Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in North Miami Beach
North Miami Beach sits entirely inside Miami-Dade County’s High Velocity Hurricane Zone, the strictest wind-load jurisdiction in the United States. Every window and door replacement, no matter the size, must carry a Miami-Dade Notice of Acceptance, which is a product-by-product approval showing the exact unit passed Miami-Dade’s wind and water performance standards. Hollywood, in Broward County, does not impose the same county-level NOA mandate. This is not a paperwork preference; it is a legal requirement, and we pull the NOA for every product before we install it. Call (863) 334-2933 and we will show you the NOA documents for the units in your quote.
No. Jalousie, or louvered, windows cannot be configured to achieve an impact rating, and no manufacturer produces a retrofitted impact glass pane for the original louver frames. The geometry does not work; the glass louvers cannot be replaced with a fixed impact unit. If you are doing permitted window work on a 1950s CBS ranch in Skylake or Biscayne Gardens, the permit will require replacement of the affected jalousie openings with Miami-Dade NOA-approved impact windows. We handle the full scope, and we will walk you through the exact phasing if you want to replace the house in stages rather than all at once. Call (863) 334-2933 for a free estimate on your full opening list.
The coastal-spec version uses stainless steel hardware, a marine-grade frame finish, and fusion-welded frame corners. The inland-spec version uses standard zinc-plated hardware, a basic anodized or painted finish, and mechanically fastened corners. In North Miami Beach, the inland-spec hardware will show pitting within three to five years. The frame will show corrosion at the weep holes and corners within seven to ten. The coastal-spec upgrade typically adds 15 to 22 percent to the unit price, but it avoids a second full replacement within a decade. We quote both options side by side so you see the exact price gap and can make the call with the numbers in front of you.
Fogging between panes means the insulated glass unit’s seal has failed. Moisture has entered the air space between the glass lites, and the inert gas has escaped. In North Miami Beach, the combination of salt-laden air, intense UV exposure, and daily thermal cycling breaks down IGU sealants and desiccants faster than inland installations. A properly specified coastal unit with a marine-grade frame and high-quality IGU sealant should hold its seal for fifteen to twenty years even here, but an inland-spec unit will fail earlier. If you are seeing fog on a unit that is only seven to ten years old, the fix is IGU or sash replacement, not defogging. Call (863) 334-2933 and we will inspect the unit and quote the replacement.
You can phase the work. There is no city ordinance in North Miami Beach that requires a whole-house window replacement in a single project. The permit for each phase will require every opening in that phase to meet current HVHZ standards with Miami-Dade NOA-approved units. What catches homeowners off guard is the jalousie issue: if a phase includes any original jalousie windows, those openings cannot be partially retrofitted. They come out and impact units go in. We phase projects for North Miami Beach homeowners all the time, and we will give you a written scope and price for each phase before you commit to anything. Call (863) 334-2933 and we will walk the house and break out the phases on paper.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving North Miami Beach and South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After