Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Pembroke Park
If you own a home in Pembroke Park, you already know the drill: hurricane season rolls around every June, and your windows are either up to code or they’re a liability. Most of the older homes and mobile home units here still have original single-pane jalousie or louvered-glass windows that simply don’t meet Broward County’s High-Velocity Hurricane Zone (HVHZ) standards. We install Impact Windows & Doors that are Miami-Dade NOA-approved and built for Pembroke Park’s specific exposure, and we handle the permitting and code compliance so you don’t have to fight the paperwork. Call us at (863) 334-2933 for a free estimate, and we’ll walk you through exactly what your home needs.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Impact Windows & Doors Company
We’ve worked in enough Pembroke Park homes to know this town is different from Hollywood or Dania Beach. The manufactured home parks, the mid-century CBS houses along Hallandale Beach Boulevard, the salt air that works on aluminum frames year-round: it all shapes how we spec and install impact windows and doors here. Our technicians are background-checked, uniformed, and trained to handle the dual compliance burden Pembroke Park throws at them, satisfying HUD-code manufactured home standards and Broward County’s HVHZ rules on the same job. That’s not something every installer in South Florida can say.
We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. Dale Kessler founded this company on a simple rule that still governs every install: if the pane is not true, the job is not done. Every job gets our Done Right Promise, and we stand behind it in writing.
Our Impact Windows & Doors Services in Pembroke Park
Hurricane Impact Windows
Replacing windows in Pembroke Park means working around two things: older rough openings that were never framed for modern impact-rated units, and salt corrosion that’s eaten through decades-old aluminum frames. We tear out the old single-pane jalousies and louvered units, rebuild the rough openings as needed, and install NOA-approved impact windows with the right low-E glass for this coastal climate. Most homes here get full-rough-opening reconstruction rather than a simple sash swap, and we quote line items so you see that work listed up front.
Impact Sliding Glass Doors
Sliding glass doors take a beating in Pembroke Park. Salt-laden air gets into the rollers and tracks, and the frames on older doors warp under the humidity cycle. We replace them with impact-rated sliders that are tested for the same wind loads as your windows, and we make sure the flashing and waterproofing at the threshold are done right, because that’s where a lot of original installs failed around here. A typical impact sliding glass door replacement in Pembroke Park runs $2,800 to $6,500 depending on size and manufacturer line.
Impact Entry & French Doors
Entry doors and French doors on older Pembroke Park homes often carry original frames that were never properly flashed behind the stucco. When we pull those doors, we frequently find rotted framing and failed tape, same as we find behind the windows. We rebuild the rough opening, upgrade to an impact-rated door system, and have the new flashing inspected before we close the walls. You get a door that actually holds its seal in July, not one that binds when the humidity climbs.
Impact Garage Doors
Garage doors are the single biggest opening on most Pembroke Park homes, and in a hurricane corridor, an unbraced or non-impact door is a breach waiting to happen. We install and brace impact-rated garage doors that meet HVHZ wind-load requirements, and we check the track and hardware for the corrosion that develops fast this close to the Atlantic. If your door is more than fifteen years old and still original, it’s worth having us look at it before the next storm.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
We’re an authorized installer for more than a dozen manufacturer lines, and for Pembroke Park work we commonly quote side by side on paper so you see exactly what you’re buying and what each line costs. We keep common parts and hardware for these brands on hand, which means less waiting when a track or balance needs replacing. If you have an older Jeld-Wen unit in a mobile home park or a mid-century CBS house, we can match the replacement to what’s already there without forcing you into an unnecessary full retrofit.
Common Impact Windows & Doors Problems We See in Pembroke Park Homes
- Salt corrosion seizing jalousie mechanisms: The louvered-glass windows so common in Pembroke Park’s 1950s and 60s stock corrode at the crank and hinge points until the sashes won’t move. By the time a homeowner notices, the frame is often too far gone to salvage, and pulling it damages the surrounding stucco.
- Rotted rough framing behind original single-pane windows: Failed flashing tape from the original install lets water sit against the rough opening, and after fifty or sixty years, that framing is soft. You can’t pocket-replace a window into rotted wood; you’re doing a full tear-out and rebuild.
- HUD-code vs. HVHZ conflicts on manufactured homes: Mobile home units in Pembroke Park carry HUD-code window and door standards that don’t automatically line up with Broward County’s HVHZ requirements. Installers who don’t know both end up doing the job twice or leaving the homeowner with units that won’t pass inspection.
- Fogged seals on early impact retrofits: We see a lot of failed insulated glass units on homes that had impact windows retrofitted ten or fifteen years ago, before the sealant technology caught up to South Florida humidity. Fog between the panes means the seal is dead, and the unit has to be replaced, not repaired.
Pricing for Impact Windows & Doors in Pembroke Park, FL
A full impact window replacement on a typical mid-century Pembroke Park home runs $900 to $1,800 per opening for the window itself, with labor and rough-opening work adding $400 to $1,200 per opening depending on what we find when the old unit comes out. Impact sliding glass doors run $2,800 to $6,500 installed, and an impact entry door typically lands between $2,200 and $5,000. Manufactured home units, because of the HUD/HVHZ dual compliance, usually add 15 to 25 percent over a comparable stick-built job in the same square footage. We give you a written line-item quote before we start, and if we open a wall and find something the quote didn’t cover, you approve it in writing before we touch it. Call (863) 334-2933 for a free estimate, and you’ll have real numbers for your specific house, not a range from a website.
We Also Serve Cities Near Pembroke Park
Our crews serve Pembroke Park and the surrounding towns regularly. If you’re in Hollywood, Dania Beach, Aventura, or Hallandale Beach, we can schedule the same kind of detailed, code-compliant installation we do here. See our full coverage on the Impact Windows & Doors in Pembroke Park page for specifics on service area and scheduling.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Pembroke Park
Yes. Broward County’s HVHZ rules apply to every residential structure in Pembroke Park, including manufactured and mobile home units. That means a HUD-code home needs windows and doors that meet the same Miami-Dade NOA impact standards as a concrete-block house, even though the HUD code itself has different structural requirements. We handle both sets of standards on the same job, which is something not every installer in this area has experience with. Call (863) 334-2933 and we’ll tell you exactly what your manufactured home needs to pass inspection.
You need the whole unit changed. Jalousie windows, the louvered-glass style common in Pembroke Park’s older homes and mobile home parks, are explicitly excluded from HVHZ compliance and cannot be retrofitted or reglazed into a code-compliant condition. The full frame comes out, the rough opening gets rebuilt to current dimensions, and an impact-rated window goes in. If you’re holding onto jalousies anywhere in the house, budget for a full tear-out on those openings. Call us at (863) 334-2933 for a per-opening price before you commit.
On a 1960s concrete-block home near the Pembroke Park West mobile home community, our crew pulled out rusted aluminum jalousie windows and found rotted framing and failed flashing tape behind the stucco. That’s typical for this area. We see salt corrosion on the frames, water damage in the rough openings, and on manufactured homes, wiring and fire-code issues that only surface once the walls are open. We rebuild the rough openings, upgrade to NOA-approved impact-rated units, and have the new flashing inspected before closing the walls. Get the full picture with a free estimate: (863) 334-2933.
We stop work on that opening and bring the electrical issue to your attention in writing, with a price to correct it, before we proceed. Opening walls in older Pembroke Park homes frequently triggers fire-code upgrades, including hard-wired smoke detectors and egress-compliant windows, especially in mobile home parks. You approve any additional scope in writing before we touch it, and we don’t bury surprise line items on the final bill. That’s the Keystone Standard, and it’s how we’ve done every job since 2008. For a quote on your specific house, call (863) 334-2933.
Fog between the panes means the insulated glass unit’s seal has failed, and the desiccant inside the spacer has saturated. In Pembroke Park’s humid coastal air, failed seals show up faster than they do inland because the constant moisture load works against the sealant. The unit can’t be repaired; it has to be replaced. If your impact windows are under warranty, we register the claim and handle the replacement. If not, we’ll quote you a new insulated glass unit at a fair price. Call (863) 334-2933 and we’ll tell you what you’re looking at.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Park and all of South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.