Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Dania Beach, FL | TruePane Windows & Doors
We provide independent Dania Beach Window Installation and door service across Dania Beach, from the ranch homes west of Federal Highway to the condos along the Intracoastal. The one thing that makes our CGI work different here: we understand what happens to impact-rated frames and laminated glass when they live under the direct flight path of Fort Lauderdale-Hollywood International Airport and inside Broward County’s High Velocity Hurricane Zone, at the same time. If your CGI units need diagnosis, repair, or honest replacement advice, call us at (863) 334-2933.
Why Dania Beach Residents Choose Us for CGI Service
We are an independent CGI service provider, which means our recommendations are not tied to selling a single product line. We have spent years working on CGI windows and doors in Broward County’s HVHZ and we know how their engineering holds up under salt air, jet-blast vibration, and wind-driven rain. Dale Kessler grew up in the Liberia neighborhood of Hollywood, where his father spent weekends resealing jalousie frames against whatever the Atlantic decided to throw at them that season. After high school, Dale enrolled in the building construction technology program at Broward College, where he learned to read a rough opening before he learned to drive a company truck. He has been measuring, setting, and troubleshooting windows and Dania Beach Door Installation in South Broward for going on three decades, and the work he is best known for is impact-rated installations that actually pass reinspection without a callback. That standard carries into every CGI service call we run in Dania Beach.
We answer the phone with a live person twenty-four hours a day, and our technicians arrive in uniform with OEM-compatible parts and the tools to do the job right. For full CGI expertise, see our CGI sales & service page.
Common CGI Windows & Doors Problems We Solve in Dania Beach
- Roller and track wear on CGI sliders near the FLL flight path. The constant low-frequency vibration from takeoffs and landings works rollers loose over time. In the blocks just west of Federal Highway, we see sliders that still lock but no longer glide without effort. We swap in OEM CGI rollers and clean the track bed, or replace worn track caps so the panel rides true again.
- IGU seal failure showing fogging or salt haze in CGI Estate and Classic fixed windows. Salt air accelerates seal degradation. A CGI fixed picture window on a Dania Beach CBS ranch that faces east may show a moisture line or white haze between the panes within eight to twelve years. We replace the failed IGU with a laminated impact unit and preserve the original frame when the frame is still square.
- Corroded keeper strikes and locking handles on CGI impact casements from marine air. Dania Beach’s proximity to the Atlantic and the Intracoastal means hardware oxidizes faster than it does six miles inland. When a casement handle snaps or a keeper no longer holds the sash tight enough for wind-load rating, we replace the hardware with OEM CGI parts or Miami-Dade-approved marine-grade equivalents.
- Weep system clogs from wind-driven rain and salt residue. When weep bays fill with salt and sand, water pools inside the frame and eventually works its way under the sash. Homeowners in Dania Beach’s older inland neighborhoods call us for this more than almost anything else. We clear the weep channels, replace deteriorated weep-bay covers, and verify drainage before we leave.
- Frame corrosion penetrating the mounting flange on older CGI Classic Series units. If salt has eaten through the aluminum at the flange, the unit is no longer serviceable and the product approval is voided. We tell you that plainly. Our job is not to sell a replacement when a repair will hold, but we will not patch a frame that has lost structural integrity.
CGI Service in Dania Beach: What Local Conditions Mean for Your Equipment
Dania Beach sits directly adjacent to Fort Lauderdale-Hollywood International Airport, one of the busiest airports in the Southeast, while also inside Broward County’s High Velocity Hurricane Zone. That double pressure changes how CGI equipment wears and what homeowners ask for. We routinely replace CGI impact units in the blocks just west of Federal Highway where homeowners demand STC 35+ laminated glass to quiet jet noise while maintaining HVHZ wind-load approval. That pairing, sound attenuation plus impact rating, is a Dania Beach sales conversation that Hollywood and Fort Lauderdale contractors rarely hear at the same frequency. On a 1960s CBS ranch off Southwest 5th Avenue, our tech found a CGI Estate Series fixed picture window with a failed IGU showing persistent salt haze between the panes and a moisture line halfway up. We removed the glazing bead, swapped in a new laminated impact IGU with the original frame intact, replaced the corroded weep-bay covers, and re-caulked the exterior perimeter with marine-grade sealant. The homeowner now has clear glass, full NOA compliance, and no more jet-noise whistle around the frame. For the broader picture of what we do in this area, see our Dania Beach service area page.
CGI Models & Products We Service in Dania Beach
We work on the full CGI residential and light-commercial range, including the Estate Collection impact windows, the Classic Series aluminum impact windows, the Sentinel impact casement and awning windows, and Commercial Series aluminum storefront and door systems. When we repair a CGI impact-rated unit, we source OEM CGI rollers, cam locks, and weatherstripping whenever the hardware is still in production. For discontinued hardware on older Classic Series windows, we use Miami-Dade-approved marine-grade aftermarket parts that preserve geometry and load ratings. We keep common OEM-compatible components stocked for fast Dania Beach turnaround, and we quote parts and labor side by side on paper before any work begins.
CGI Service Pricing in Dania Beach
CGI service pricing in Dania Beach depends on what failed and whether the unit is impact-rated. A basic roller or track service on a single sliding panel typically runs from $145 to $295. Replacing a failed IGU in a CGI Estate fixed window runs higher, usually $450 to $950 depending on glass size and whether the laminated impact glazing is still in production. Hardware replacement for a corroded casement keeper or handle usually falls between $85 and $220 per unit. Weep-system clearing and re-caulking generally costs $120 to $260. A full-frame replacement is the high end, and we only recommend it when the mounting flange is compromised or the product approval is voided. Every estimate is free and written line-item before you agree to anything. Call (863) 334-2933 for an exact quote on your CGI equipment.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Dania Beach
Yes, when the glass is laminated impact glazing with an STC rating in the mid-30s or higher. Regular single-pane CGI Classic windows will not meaningfully cut jet noise. In the Dania Beach blocks west of Federal Highway, we routinely specify STC 35+ laminated impact glass for exactly that reason. It carries both the HVHZ product approval and measurable decibel reduction. Call (863) 334-2933 and we will measure your openings and quote the right glass package.
Yes. CGI’s impact-rated products carry Miami-Dade Notice of Acceptance or HVHZ Florida Product Approval, which is what Broward County requires for replacement windows and doors in Dania Beach. Not every CGI line is impact-rated, though. We verify the specific product approval on your existing units before recommending repair or replacement, so you do not pay for work that does not satisfy the local code official.
Yes, though it is environment-driven rather than a manufacturing defect. Constant salt air from the Atlantic and the Intracoastal Waterway accelerates oxidation of aluminum frames and hardware, particularly on homes within a mile of the water. We see corroded keeper strikes, pitted frame corners, and jammed weep systems on CGI units in Dania Beach more often than on the same models installed further inland. The fix depends on how deep the corrosion runs. Call us at (863) 334-2933 for an honest read on yours.
In most cases, yes. If the frame is square, the laminated glass is intact, and the product approval is not voided, we repair the unit. We replace failed IGUs, swap worn rollers and locking hardware, and rebuild weep systems without pulling the frame. We only recommend full replacement when corrosion has penetrated the mounting flange or the unit’s original approval no longer applies. The call and the estimate are free.
Some parts remain available through OEM channels, but several hardware sets on older Classic Series units have been discontinued. When OEM parts are no longer made, we use Miami-Dade-approved marine-grade aftermarket components that preserve the original geometry and load ratings. That keeps an older impact unit serviceable without compromising its wind-load performance. We will show you exactly what we are installing and why before we install it.
Service Areas Near Dania Beach
We provide CGI service throughout South Broward, including Dania Beach, Hollywood, Pembroke Park, Hallandale Beach, and Aventura. For CGI work just south of Dania Beach, see CGI service in Aventura. For work in the neighboring city to the south, see CGI service in Hollywood.
Book Your CGI Service in Dania Beach Today
If your CGI windows or doors are binding, fogged, corroded, or letting jet noise through, call (863) 334-2933. We will send a background-checked technician to Dania Beach, measure the units, and give you a written line-item quote before any work begins. Free estimates, no pressure, and a live person on the phone when you call.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Dania Beach and South Broward since 2008. Measure it right, set it square, and the paperwork takes care of itself.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.